Used Processing in Wallonia, Belgium

1981 Green sand mixer EIRICH DWV 29/6, 6000 l

• Manufacturer: Eirich

With hydraulic discharge flap With 2 whirlers (swirler), 160 kW each With 2 cup drive motor, 150 kW each

Bunker, ± 2 m³, with discharging conveyor

External dimensions: length 4400 mm, width 1650 mm, height 2050 mm Dimensions of belt: length center distance 3650 mm, width 600 mm Plastic lining inside the bunker Drive via V-belt to slip on gear box

2018 Pouring ladle ACETARC, with transport foot, ± 1600 kg

External dimensions: length 1600mm, width 1350mm, height 1700mm With useful lining With one long and one small spout With bold-on trunnions With transport foot for lift tracs With heat protection With type plate ...

1998 Core shooter LAEMPE with core mixer LAEMPE SM6_3

• Manufacturer: Laempe / Röperwerk

Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...

1998 Core shooter LAEMPE with core mixer LAEMPE SM6_3

• Manufacturer: Laempe / Röperwerk

Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...

1998 Core shooter LAEMPE LB20

• Manufacturer: Laempe / Röperwerk

Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...

Turnover moulding machine KÜNKEL WAGNER, WPM 1

• Manufacturer: Künkel Wagner
• Model: WPM 1

Weight: 2600 kg | Dimensions: width 840mm, depth 2100mm, height 1740mm | Table: 700mm x 500mm | Maximum width (depth) of moulding boxes: 620mm | Pression: 5000 kg | Jolt capacity: 360 kg | Lowering stroke: 300mm

Hammer mill HAZEMAG, 1050 mm X 300 mm

• Manufacturer: Hazemag

Motor: Couleur LAHMEYER, 18,5 kW, 25 CV, 1455 t/min, 380/600 V Rotor with 4 axes Up to solid steel construction with 4 feets. With vibrating conveyor under the hammer mill 1900 mm x 600 mm With 2 vibration motor...

2018 Refrigerating dryer INGERSOLL RAND, 5 m³/min

• Manufacturer: Ingersoll Rand
• Model: D300IN-A

Weight: ± 100 kg | Dimensions: length 700mm, width 500mm, height 980mm | Motor: 1,2 kW, 230 V, 50 Hz, 1 A | Capacity: 5 m³/min | Pression: 14 bar | Ambient temperature: + 2 / 50 °Celsius | Inlet temperature: + 5...

Crucible support scissors for crucible A300

Weight: 25 kg

1979 Pouring furnace ABB, 15 t, type OCC150

• Manufacturer: ABB

Electric pouring furnace Pouring furnace: SERT, year of construction 1989 (modernised and overhauled in 2005) Hydraulically movable (follows the AMC) With cooling tower

1979 DISAMATIC 2013 MK5, cycle time 9s, with AMC

• Manufacturer: DISAMATIC

DISAMATIC 2013 MK 5 (upgraded from MK 3 to MK 5 in 2009) Control board SIEMENS S7 Touch Panel Conveyor belt under the machine (cellar) With AMC 18, hydraulic

Electric arc furnace, 10 t

Control board SIEMENS S7 with replacement PC With 2 furnace rechange bodies (one per furnace)

1992 Amine Gas Washer BGT, 20 000 m³/h

With collection tray With exhaust With coarse separator, 2m x 2m x 1,6m

Complete rechange furnace body, 3,2 t

• Manufacturer: ABP

Completely overhauled and modernized by the manufacturer Without the frame