Used Processing in Wallonia, Belgium

1995 1 chimney, heigth 25000 mm, Ø 1080 mm

MONOTAL, type: EZ1, serial number: 8910/917 Construction year: 1995, weight: ± 8000 kg In two parts 10 - 15 m, without ladder Material RST 37-2 Feeding tube in stainless steel

Exhauster F. lli Ferrari, 35000 m³/h

• Manufacturer: Ferrari

Type: ELVE FR 1001 11N 1 AILGO-A.N. , serial number: 920015978 Motor ABB, type MBT725M4, 45 kW, 220/380 V, 50 Hz, 1480 rpm On steel-frame in form of U Drive over belts

Radial blower for low pression

Drum Ø 400 mm, air exit 480 x 500 mm Driven by belts Drum with longitudinal laminations Blower suitable for air, smoke, etc.

Blower

0,37 KW, 220/380 V, 2840 rpm Entry and exit Ø 120mm

Small cartridge filter ORION DEL NEGRO

In good condition Motor: 1 hp,  220/380 V

Small belt conveyor 2080 x 500mm, SAE

• Manufacturer: SAE

Weight: 130 kg Outside dimensions: 2750 x 900 x 370mm Useful dimensions: 2080 x 500mm Drummotor BAUER  DT385, Serial number:1200159, 220/380 V

2 special discharging belts, 3350 mm x 780 mm

2 bands superposed, the lower one can be moved back and forth by 1800 mm, suitable for hand moulding for great chassis or shaking on the ground With 3 gearmotors, superior band with reductor with moto reductor ab...

Small belt conveyor 2100 x 500mm SAE

• Manufacturer: SAE

Drum motor BAUER, type OT385/1, serial number 15606241, 220/380 V Extraction band

1983 Sand aerator HEINRICH WAGNER, band 400 mm

• Manufacturer: Heinrich Wagner

Type: RAD400, serial number: 10082 With magnet, band 400 mm In good working condition

DISAMATIC 2013 MK4, 18 m AMC, 36 m SBC

Year of construction: 1977, weight: 40.000 kg Disa with hydraulic AMC 18 m, SBC 36 m driven by synchronized electric motors with core setter 2043CSE

Gasing unit LÜBER LW-FDA-825; 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With 8 kW heating With contactor control and stainless steel storage tank 30 l Compressed air control via proportional valve With micro pump, gas dosing via rotameter

Gasing unit LÜBER LW-FDA-825; 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With 8 kW heating With contactor control and stainless steel storage tank 30 l Compressed air control via proportional valve With micro pump, gas dosing via rotameter

Compressor ATLAS COPCO GA75FF 763m³/h

• Manufacturer: Atlas-Copco
• Model: GA 75

External dimensions: Length: 2000 mm; Width: 1000 mm; Height: 1950 mm

Induction furnace JUNKER 2x 4t

• Manufacturer: Junker

Crucible dimensions: Ø780mm; height: 1475mm Melting and holding warm possible at the same time With 2 loading conveyors With 2 water pump stations With hydraulic unit With control cabinet SIEMENS S5 control With ...

1980 Dry Discgrinder HERZOG HT 350-2

• Manufacturer: Herzog

Type: HT350-2, Year: 1980, in very good conditions With installed dust filter