Used Processing in Hiroshima, Japan

1993 Izumi Food Machinery NB13SR-001-7-W type

• Manufacturer: Izumi

Product side flow rate: 800L / Hr 100 ℃ → 50 ℃ Bore size: 25A Cooling water side: 6000L / Hr 38 ℃ ← 32 ℃ Bore: 40A Material: SUS317L (plate) Packing: NBR Please see the PDF below for specifications.

1990 Plate heat exchanger

• Manufacturer: Hisaka Seisakusho

Where to use: Chemical factory Food factory Environmental recycling factory Water treatment plant | Heat transfer area: 75m2 SUS pressure leak tested, as-is

1989 Hisaka Model UX-016-J-36

• Manufacturer: Hisaka

Heat transfer area: 3m2 Design pressure: 5kgf / c㎡

SM30D type made by Kanto Blender

• Manufacturer: Made by Kanto Blender

Touchscreen type. Operation confirmed. Note: There is no misalignment of the touchscreen, but there is some white blurring on the panel. This does not affect use. Visibility may be poor.

Hokos NP-20D special model

• Manufacturer: Made by hocos

Pulse jet type Filtration area: investigating | Electric motor: 0.75KW 200V 50HZ | Material: Made in SUS

2006 GL receiver

• Manufacturer: Made of Ikebukuro enamel

Total volume: 2000L Design pressure: 0.3MPaG Design temperature: About 50 ℃ No repair history.

Hot air dryer (current dryer)

• Manufacturer: Made by Tsutsuyoshi

With blower, feeder and operation panel With electric circuit diagram Application (Drying of powder, granule, etc.) Confirmed that the main operation panel is energized.

2004 Kajiwara Model KQ-2

• Manufacturer: Made by Kajiwara

Total capacity: 200L, Capacity: 120L, Made of SUS Manual overturn type, hot water heating type (with built-in electric heater) Operation checked, cleaned and painted

Liquid agitator

Material: Made of SUS Total volume: 500L With stirring device For liquids Detailed investigation

Dual-armed kneader

• Manufacturer: Mitsui mine

Total capacity: 200L Actual capacity: 120L Banbury type Electric Rollover Type with Jacketed Top Lid

1991 Hammer mill

• Manufacturer: Made by Buehler

Where to use: Chemical factory Feed and fertilizer factory Environmental recycling factory | Main power: 75KW 200V Maintained Swing hammer screen 1mm Feed grinder Main body only

1996 Accor AS-25-3-TR

• Manufacturer: アコー

Specifications: Filtration area: 8m2 Process air volume: 13m3/min/250mmAq Blower 2.2kw (without)

2002 [Ohno Chemical Machinery] Cooker

• Manufacturer: 大野化学機械

Screw diameter: φ675 x 7355L Main body and screw internal pressure: 0.49 MPa (maximum operating pressure) Class 2 pressure vessel Diagrams available

motor

• Manufacturer: Daiichi Bussan Co.

Unused 1.5kw4p Power: 1.5kw4p | Quantity saved: One

1999 Japan Seisui FRP Tank

• Manufacturer: 日本整水

Vertical cylindrical type Drawing available, upper manhole available