TESCA Synchronization Panel Trainer
new
46622 in industry loads are directly connected to the source through an isolation switch. But when the load demand is increased and the source capacity is less, another source is connected in parallel so that bot...
Midrand, South Africa
Dummy Load (-105dBc) Connector: N-F
new
Dummy Load (-105dBc) Frequency: DC-3GHz | Power: 5W | Connector: N-F
Midrand, South Africa
Dummy Load (-105dBc) Connector: DIN-M
new
Dummy Load (-105dBc) Frequency: DC-3GHz | Power: 5W | Connector: DIN-M
Midrand, South Africa
Chauvin Arnoux CA745, LED Voltage Indicator, 690V ac/dc, Continuity Check, Mains Powered, CAT III 600 V
new
- Manufacturer: Chauvin Arnoux
Maximum voltage: 690V ac/dc | Continuity check: Yes | Safety category: CAT III 600 V | Display type: LED | Power source: Mains | Dimensions: 47 x 36 x 193mm | Weight: 170g | Height: 193mm | Length: 47mm | Maximu...
Midrand, South Africa
Chauvin Arnoux CA6608 Phase Rotation Tester
new
- Manufacturer: Chauvin Arnoux
Midrand, South Africa
Coupling Decoupling Network M3
new
The TBCDN-M3 is a Coupling Decoupling Network for conducted immunity testing according to IEC 61000-4-6. The TBCDN-M3 is compliant with IEC 61000-4-6 Annex D2. It is designed to inject common mode disturbance sig...
Midrand, South Africa
Snap On 32 mm up to 750 MHz
new
The TBCP2-250 is a snap-on RF current monitoring probe. The probe has a very flat response with a 3dB bandwidth of 250 MHz and is characterized over the frequency range from 30kHz to 300 MHz. Upon request, it can...
Midrand, South Africa
FiberMASTER Series – Power Meter
new
The TREND FiberMASTER™ fibre optic testing kit allows the user to measure absolute power and calculate the loss of fibre optic links at several wavelengths. Absolute power measurements are helpful when trouble sh...
Midrand, South Africa
TBL0550-1 5 µH, 50A LISN, CISPR 16-1-2, CISPR 25, 1 path, EN 55025, MIL-STD-461F
new
- Manufacturer: LiSN
The TBL0550-1 5µH LISN is a device required to setup conducted noise measurements of DC-powered electronic equipment. It is designed to be used for measurements in the frequency range of 150kHz to 110 MHz accordi...
Midrand, South Africa
TESCA Sequential Logic Tutor
new
The Electronic Sequencer is intended for elementary as well as advance training of digital electronics. The trainer cover regular digital circuits by solder less inter connections through use of 4 mm brass termin...
Midrand, South Africa
Dummy Load (-105dBc) Connector: N-M
new
Dummy Load (-105dBc) Frequency: DC-3GHz | Power: 5W | Connector: N-M
Midrand, South Africa
Chauvin Arnoux C.A 732 Non-contact voltage tester CAT III 1000 V LED
new
- Manufacturer: Chauvin Arnoux
Midrand, South Africa
ALL-TEST PROTM 31
used
- Manufacturer: ALL-TEST PRO
A PERFECT TOOL FOR TROUBLE SHOOTING,START-UP & QUALITY CONTROL OF AC/DC ELECTRIC MOTORS, GENERATORS OR TRANSFORMERS
Gauteng, South Africa
ALL-TEST PROTM IV 2000
used
- Manufacturer: ALL-TEST PRO
Motor Circuit Analyzer PREDICTIVE MAINTENANCE QUALITY CONTROL TROUBLE SHOOTING
Gauteng, South Africa
Motor Circuit AnalyzerPREDICTIVE MAINTENANCE QUALITY CONTROL TROUBLE SHOOTING
used
The ALL-TESTIV PRO2000 finds the faults you cant see with any other instrument. - Turn-to-turn, coil-to-coil, and phase-to-phase faults - Open phases - Burned or contaminated windings - Poor connections...
Gauteng, South Africa
Tip: Enter manufacturer, model or keyword