Used extraction

Machinery

Description Key components KAIMAN 700 THETA 700 mm diameter tungsten carbide cutting disc Cutting Area Protection Kit (Pneumatic Opening) No.2 horizontal vices Micro-drop disc lubrication system with pure oil Pre...

Machinery

Description Basic parts PANDA 550 THETA 550 mm diameter tungsten carbide cutting disc Horizontal vise No.2 vertical vises Cutting area protection kit Air gun with spiral hose (for cleaning the machine) Micro-drop...

Machinery

Description Basic components SPRING 45 A 450 mm diameter tungsten carbide cutting disc No.2 horizontal pneumatic vices Pre-installation for extracting grease and fumes Complete protective kit around the cutting a...

Cutting machines

Description Technical characteristics TR 152 No. 2 tungsten carbide cutting discs with a diameter of 550 mm Checklist No.4 vertical clamps on each head No.1 horizontal clamp on each head Movable reel head (2m) US...

Machinery

Description Basic components SPRING 45 E 450 mm diameter tungsten carbide cutting disc Spray lubrication of tool No. 2 horizontal pneumatic vise Pre-installation for extracting grease and fumes Complete protectiv...

Machinery

• Manufacturer: Fom Industrie

Description SPRING 55 key components 550 mm diameter tungsten carbide cutting disc Disc lubrication system with spray device Cutting area protection kit No.2 horizontal pneumatic vises Full protective kit around ...

Machinery

Description Basic accessories SPRING 45 THETA 450 mm diameter tungsten carbide cutting disc No.2 horizontal pneumatic vices Pre-installation for extraction of shavings and fumes Complete protective kit around the...

Machinery

Description Standard equipment Carbide cutting disc with a diameter of 400 mm Side support plates on both sides Cutting angle from 45 The counterclockwise up to 45 The clockwise on a vertical axis and 45 The cloc...

Italyvacuum Fan Top

Particularly suitable for extraction with 1-head and 2-head sawing machines • Motor type: Fan • Motor power: 2.2 kW • Capacity of collection bin/bag: 172 litres • Extraction flow rate: 1,500 m3/h • Under pressure...

Machinery

Description Technical characteristics ALVA 55 THETA Cutting from 22.5 o to 90 o with electronic control at each intermediate degree Direct motor transmission Motor power: 2.2 kW Hydro-pneumatic disc feed (adjusta...

Machinery

Description Technical characteristics Head tilt: 90°- 45°- 22.5° and intermediate angles through front mechanical stops suitably protected from chips No. 2 carbide cutting discs with a diameter of 500 mm Hydrauli...

Machinery

Description Technical characteristics ALVA 55 Pneumatic tilting of heads at 90 o -45 o – 22.5 o Intermediate angles via stops at the front of the machine Direct motor transmission Motor power: 2.2 kW Hydro-pneuma...

SAW MECAL SW 400M

• Manufacturer: MECAL

Single-head aluminum saw, manual descent of the disc. Very sturdy construction made of cast steel, with bearings on the turntable. Protective cover, which is divided into 2 parts, completely protects the operator...

STROMAB automatic optimizing crosscut saw TR 600 MATRIX - 6000 with full optimization

• Manufacturer: Stromab

Technical data: - Drive power motor 9,2 kW - diameter saw blade 600 x 30 mm Z=60 - Cutting capacity according to the cutting diagram - cutting capacity 150 x 365 mm - Cutting capacity 130 x 440 mm - Cutting capac...

Stromab RN450, 18" Blade Capacity, 5.5HP, 220V, 3PH, 330MM Cutting Capacity at 25mm High

• Manufacturer: Stromab

Stromab RN450, 18" Blade Capacity, 5.5HP, 220V, 3PH, 330MM Cutting Capacity at 25mm High This listing is for the Stromab only. Stromab TR450 Cut-off saw technical data Blade diameter 450 mm Blade rotation spe...