- Trusted Seller
2006 VANGROENWEGHE MBO-300-2KS/2KS TOP AND BOTTOM SANDER [SX-013048]
- Manufacturer: MBO
VANGROENWEGHE MBO-300 2KS/2KS Mastersander ... Top & Bottom Sander Machine is open on front side, allowing for sanding of frames. The fine sanding platens can be adjusted slightly slanted, particularly useful whe...
- Trusted Seller
1980 STEINEMANN OSUS NOVA 190 FS VENEER SANDER (50 IN - 90 IN, 2-HEAD) [SX-012724]
- Manufacturer: Steinemann
STEINEMANN Type OSUS 190 FS Wide Belt Sander with the following features: -- (1) set of top & bottom opposed heads; motorized thickness opening 5/64" min. to 6" max. -- Each Head fitted with 201 kW (269 HP) Motor...
- Trusted Seller
2006 FARMER KSM 1
- Manufacturer: Boere
BOERE KSM 1 Edge sanding machine Type;: KSM-1 | Length of work table: 900mm | Width of work table: 400mm | Table heigt: Height adjustable | Dimensions: 1,700 * 750 * 1,250 mm | Sanding aggregate tilting: 0-60° | ...
Enter, Netherlands - Trusted Seller
1992 Samco Unilev 15
- Manufacturer: Samco
- Model: UNILEV 15
Samco Unilev edge sanding & veneer sanding Length of work tables: 1440mm | Width of work tables: 710mm | Work tables tilting: 0-30° | Belt dimensions: 2170 * 150 mm | Engine: 3 KW | Oscillating belt pneum.: 0 - 2...
Enter, Netherlands 
KMS S-75V belt sander
- Manufacturer: KMS
Very compact belt sander for grinding and sanding metal and stainless steel. The compact design means it takes up only ± 1/3 of the space of a standard belt sander. Quick belt change. Ready to use.
$702 USDStaphorst, Netherlands- Trusted Seller
Veghel, Netherlands 
Belt sander KMS BS-75 (400V)
- Manufacturer: KMS
Belt sander for sanding or grinding steel and stainless steel. Stable machine on stand. Angle adjustable so that an ideal working height can always be set. Supplied ready to operate including sanding belt so that...
$914 USDStaphorst, Netherlands
Belt sander KMS BS-150 (400V)
- Manufacturer: KMS
Belt sander for sanding or grinding steel and stainless steel. Stable machine on stand. Angle adjustable so that an ideal working height can always be set. Standard equipped with braked motor so that the belt sto...
$1,444 USDStaphorst, Netherlands- Trusted Seller
2015 Mechatec Variofill
- Manufacturer: Mechatec
Also suitable for BigBag Ag_code: Slot sanders | Condition transmission: Good | Appearance: Good | Condition wear parts: Normal
- Trusted Seller
2004 breston dump 22500 X
- Manufacturer: Miedema
level regulation Ag_code: Slot sanders | Condition engine: Good | Condition transmission: Good | Appearance: Mediocre | Condition wear parts: Good | Working width: 24.00 | Content: 14
- Trusted Seller
1978 Miedema KT 75
- Manufacturer: Miedema
Manual hydr. height adjustment Ag_code: Slot sanders | Rear tires: 650/65R42 Michelin 90% | Tires for: 540/65R30 Michelin 90% | Appearance: Good | Working width: 0.75 | Mtext: 65 cm width 7,5 m long hydraulic hei...
Grit by Fein: belt sander GI 150 2H on stand GIBE + Pipe notcher GIR
- Manufacturer: Fein
Complete set for grinding out pipes or tubes. Is in clean condition. Stands on a custom made base with wheels. Includes: 1x original contact roller for Ø 33.7 mm 1x original contact roller for Ø 48.3 mm Contact r...
$4,127 USDStaphorst, Netherlands- Trusted Seller
2007 VIET S3 T T23TM CROSS BELT (2-HEAD) [SX-013050]
- Manufacturer: Viet
- Model: S3 T T23TM
VIET S3 T T23TM - Two-Head Wide Belt Sander with (2) Cross Heads. 1,350 mm (53") working width, constant pass-line. Equipped with HP "High Performance" Technology, maintaining constant sanding pressure for all b...
Netherlands - Trusted Seller
2004 INFOTRONIC SATURN 135 RRK WIDE BELT (SANDING LINE) [SX-013067]
- Manufacturer: INFOTRONIC
INFOTRONIC SATURN 135 RRK Compact Top & Bottom Wide Belt Calibrating & Sanding Machine, consisting of: ● 3-Head Bottom sanding section, configuration: Contact roller - Contact roller - Combination head conta...
Netherlands - Trusted Seller
2009 COSTA S A 1/ TRIT 1350 WIDE BELT (50" - 90", 5-HEAD) [SX-013069]
- Manufacturer: Costa
COSTA SA 1/ TRIT 1350 ... Wide Belt Sander - 2-Head, 1,350 mm (53") working width. With (1) Cross belt sanding head, segmented, (1) "Superfinish" segmented finishing platen, and (1) Outfeed Rotary Panel Cleaning ...
SCM / SCMI Sandya Sander
- Manufacturer: SCM / SCMI
- Model: Sandya
Good condition SCM / SCMI Sandya Sanders available between 1997 and 2011 years. Located in Portugal and other countries. Click request price for more information.
Paços de Ferreira, Portugal
Tip: Enter manufacturer, model or keyword