Used Sheet Metal Processing in Lombardy, Italy

HD Pneumatic Paving Hammer

HD Pneumatic Hammer is a leveling hammer that softens and shapes soft steel sheets up to 1.5 mm, aluminum, and copper up to 2.3 mm. The HD Pneumatic Hammer comes with one lower die and one upper hammer. The machi...

STANDER - Foot-operated Shinker-Stretcher Bender

The STANDER Shinker-Stretcher is a sheet metal bending machine featuring a deep throat with a foot pedal that makes shrinking and stretching more effective and less tiring. Hands-free operation allows for better ...

JAWS - Pair of Shinker-Stretchers

Using the JAWS Shinker-Stretcher Bender, you can reproduce almost anything that requires a combination of a curve and an angle. They are an indispensable tool in automotive restoration and sheet metal work, where...

TOWER - Shooting Tower

• Manufacturer: Carmicar

The TOWER - Pulling Tower is an ideal piece of equipment for auto body repairers and squeegees who want to save time and effort in straightening auto sheet metal. With its pulling force of up to 550 kilograms, th...

Millutensil Spry lubricators

• Manufacturer: Millutensil

Sheet metal lubrication system Sheet width from 100 to 2000 mm. Type of spraying: only above, above under, sectoral, spot cone, spot plate. System built upon customer’s request according to the following paramete...

Compact Implant 400×2.5

• Manufacturer: Asservimentipresse

Compact plant for low thickness sheet metal that efficiently replaces lines composed of pneumatic reels and feeders. Width: 400 mm Thickness: 2.5 mm

Compact Plant 400×5

• Manufacturer: Asservimentipresse

Compact plant for medium thickness sheet metal with strip introduction system. Width: 400 mm Thickness: 5 mm Reel: from 3 tons

Traditional Plant 1000×5

• Manufacturer: Asservimentipresse

Traditional three-machine line for the "household appliances" sector - Destination Poland Width: 1000 mm Thickness: 5 mm Reel: from 10 ton

Zig Zag compact implant 850 x 5.0 mm

• Manufacturer: Asservimentipresse

Width: 850 mm Thickness: 5.0 mm

1971 Haeusler VRM-HY 4 rolls 3100 x 42/30 mm

• Manufacturer: Haeusler
• Model: VRM-HY

Useful length: 3100 mm Max. bending thickness 42 mm Max. pre-bending thickness 30 mm Top roll diameter: 570 mm Bottom roll diameter: 570 mm Side rolls diameter: 460 mm Rotation speed: 4m/min. The machi...

2012 MG mh2528D

• Manufacturer: MG

Typology: Sheet metal processing | No. of rollers: 4 | Calendering length: 2600 mm | Upper roller diameter: 340 mm | Side roller diameter: 230 mm | Bottom roller diameter: 320 mm | Ce machine: ✓ | Encumbrances: ...

2004 IMS PHY 120

• Manufacturer: IMS

Typology: Sheet metal processing | Punching capacity: mm Ø 32 x 37 | Maximum travel: mm 0 ÷ 80 | Strokes/min: n° 36 | Hollow depth: Standard: mm 525 - Special: mm 625 | Ce machine: √ | Encumbrances: 2000x730x225...