Used threading in Germany

Tapping head from Ridgid - up to 3 " 30174

• Manufacturer: Ridgid

Thread cutting head with chaser jaws, thread cutting head, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Pipe size. up to 3 "

Tapping machine from Mager & Wedemeyer - up to max 2 inches 18998

• Manufacturer: ZOLL

Threading machine, pipe thread cutter For: Tube size max. 2 inch | Schneidbacken: 1/2″, 3/4″, 1″, 1 1/4 ", 1 1/2" | Dimensions: 510/360 / H240 mm | Mass: 64 | Internal storage: 3C10501

Tapping machine from GF - up to 2 inches 8068

• Manufacturer: GF

Threading machine, pipe thread cutter For: Tube size max. 2 inch | Schneidbacken: 2″ inch | Drive: over 3 gears | Dimensions: 550/360 / H240 mm | Mass: 80 | Internal storage: 3A10105

Tapping pliers from PCM – ET1-32 Ø 10 mm 34668

• Manufacturer: PCM

tapping head, tapping chuck, thread chuck, tapping chuck, milling tool, tapping attachment

Cutting stock holder from – 90 x 22 22901

Cutting clamp set, hand pipe tap, threading machine, pipe tap, pipe tap, die head

1989 SACMA SP27

• Manufacturer: Sacma
• Model: SP-27

Diameter range: 10,5 mm | Number of dies: 4 | Number of stations (incl. cut off): 7 | Cutting length: 85 mm | Shaft length under head: 65 mm | Output – pieces/min: 275 | Max. thread length: 50 mm | Press power: ...

1989 SACMA SP27

• Manufacturer: Sacma
• Model: SP-27

Diameter range: 10,5 mm | Number of dies: 4 | Number of stations (incl. cut off): 7 | Cutting length: 85 mm | Shaft length under head: 65 mm | Output – pieces/min: 275 | Max. thread length: 50 mm | Press power: ...

Tapping pliers from PCM – ET1-40 Ø 12 mm 36054

• Manufacturer: PCM

tapping head, tapping chuck, thread chuck, tapping chuck, milling tool, tapping attachment

Tapping pliers 4 pieces from PCM – ET1-40 Ø9/10/12 mm 34667

• Manufacturer: PCM

tapping head, tapping chuck, thread chuck, tapping chuck, milling tool, tapping attachment

Tapping head from Schütte - SH 3/4″ 34309

• Manufacturer: Schutte

tapping head, tapping chuck, thread chuck, tapping chuck, milling tool, tapping attachment

Blade Set 1/8 "-3/4" inch from RIDGID - O-R 14376

• Manufacturer: Ridgid

Cutting clamp set, hand pipe tap, threading machine, pipe tap, pipe tap, die head

1995 NEDSCHROEF MW53

• Manufacturer: Nedschroef
• Model: MW53

Thread diameter: M20-M33 | Max. width acros flats: 41 mm | Max. outside dia. of round pieces: 32-53 mm | Bar dia.: 44 mm | Cutting length: 14-65 mm | Press power: 130 to | Output – pieces/min: 150

1985 WALDRICH-COBURG 16 GLS 25-90

• Manufacturer: Waldrich Coburg

Thread whirling machine, old but good ! - Sturdy whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests with integrated integrated prismatic guides. Manual adjustment of the thread depth and o...

1985 Tapping removal machine, defective from Electro ARC - 2 DB 30209

• Manufacturer: Electro Arc

Extraction machine for taps -Delivery in as-is condition as inspected

1985 MONNIER & ZAHNER(CH) 256

• Manufacturer: MONNIER & ZAHNER(CH)

Thread milling machine for medical screws - Simple Machine for the production of (medical ) screws or worm gears on shaft-shaped workpieces - LANDIS & GYR program control PCA - Fold-out workpiece workpiece magazi...