Used Presses in Mississippi, USA

12-Ton Hydraulic Shop Press

12-Ton Hydraulic Shop Press, 16" with Adjustable Height

Standard DC200 C-Frame Press (200 tons forming /130 tons punching)

• Manufacturer: Standard Industrial

DC200 C-Frame Press (200 tons forming /130 tons punching) Rebuilt from the ground up-everything replaced but the base steel. Brand new cylinder, hydraulic system, reservoir Bed/ram re-machined to within new to...

Bullet Tanks

(2) Horizontal bullet tanks Qty available: 2

1995 Horizontal Tank

Horizontal tank built for hexane storage. Built in 1995. ASME Nat'l board number 2754. MAWP 30.5 psi at 120F. on saddles

Oil Water Separator

Horizontal Oil water separator, spray insulation Qty available: 1

Mix Tank ss

• Manufacturer: Columbia TecTank

Vertical tank on legs with 60 degree cone bottom. API 650. Cone top with top entering agitator. MAWP at 2.5 psig at 200F. Sn 07-4552. Size is 4'-6" dia x 78" s/s on 5 ft legs and 6 in at cone top. OAH is a...

Cone BottomTanks (4)

Cone bottom tanks, carbon steel on legs. Four tanks in various sizes: 2,650 gallon, 1,300 gallon, 650 gallon, and 350 gallon. Priced for the LOT of 4

Horizontal Tank

Horizontal Tank on saddles. Will have to supply measurements

Vertical Tank

Vertical carbon steel tanks. Flat bottom/flat top Spray insulaton. 25,000 gallons each. Side entering manhole. Use: Shift Tanks 1-4. Qty (4) - priced separately

2007 Horizontal Tank, insulated 14,000 gal

Horizontal carbon steel tank, insulated. API spec. On steel saddles. Approx size is 10 ft dia x 24 ft long for capacity of 14,000 gallons. Manhole at end. Has set of 1" steam coils in bottom. Built 2007, Last u...

Vertical Tank

Vertical carbon steel tank on legs. Approx size 2 ft dia x 4 ft tall - capacity. Measurements must be verified. Located Next to Settler

2012 Hydrasep Oil Water Separator

• Manufacturer: HS-1000-BD

Hydrasep Oil/Water Separator. Horizontal, carbon steel, insulated. Hydrasep 1

2007 Horizontal Tank, insulated 14,000 gal

Horizontal carbon steel tank, insulated. API spec. On steel saddles. Approx size is 10 ft dia x 24 ft long for capacity of 14,000 gallons. Manhole at end. Has set of 1" steam coils in bottom. Built 2007, Last u...

2008 Cone Bottom Tank, Insulated 2113 gal

Vertical carbon steel tank on legs, insulated aluminum clad. Slight cone bottom. Side entering manhole. Size approx 6.5 ft dia x 9 ft tall for capacity of 2113 gallons. Last used as Glycerin Still South

Vertical Tank

Vertical carbon steel tank on legs, top entering agitator. Must be measured but size approx 4 ft dia x 9 ft tall for capacity of 850 gallons. Used as RDO Tank