Used Lathes in Kansas, USA

HARDINGE PRECISION LATHE DV59 1HP 440V 3-PH 60CYCLES

• Manufacturer: Hardinge
• Model: DV 59
• Phase type: Three-phase

“MISSING CLAMP AND SCREW.” HARDINGE PRECISION LATHE MODEL: DV59 1HP 440V 3-PH 60CYCLES 110 CONTROL VOLTAGE 350KVA JADCE 8220 WIRING DIAGRAM COLLET SIZES INCLUDED IN THE STAND, ONE O/E SIZE: 1/64" TO 1-1/8", 1/64"...

FAY AND SCOTT METAL EXTENSTION GAP LATHE SWING SIZE 36" LENGTH OF BED 169" 4 JAW

• Manufacturer: FAY AND SCOTT

“NOT TESTED” FAY AND SCOTT METAL EXTENSTION GAP LATHE SWING SIZE 36" LENGTH OF BED 169" 4 JAWS THROUGH HOLE SIZE 5" HP 3 LENGTH BETWEEN CENTERS 4' COARSE PITCH SPINDLE SPEED 12,16,22,30 RPM APPROX. DEMINSIONS 180...

SUNDSTRAND AUTOMATIC LATHE MODEL 12, 10HP, 22" SWING, 24" BTN CENTERS, GROOVER

• Manufacturer: Sundstrand
• Phase type: Three-phase

“NOT TESTED” SUNDSTRAND AUTOMATIC LATHE MODEL 12, 10HP, 22" SWING, 24" BTN CENTERS, GROOVER SUNSTRANDAUTOMATIC LATHEMODEL 12S/N 82-182SPIRAL GROOVER22" SWING24" DISTANCE BETWEEN CENTERS35-365 RPM SPINDLE SPEED RA...

BOYE & EMMES M.T. CO 25" VINTAGE LATHE SERIAL NO. E126 HEAVY DUTY 3 CHUCK JAW

• Manufacturer: BOYE & EMMES

“NOT TESTED” BOYE & EMMES M.T. CO. 25" VINTAGE LATHE SERIAL NO: E126 HEAVY DUTY 3 CHUCK JAW SWING OVER BED (RATED): 25" BED OAL: 135" BED OAW: 37-5/8" THROUGH HOLE DIA: 1-3/4" 3 CHUCK JAW: 3" TAIL STOCK OAD: 49" ...

LODGE & SHIPLEY RIGHT ANGLE LATHE, 60" SWING, 1-65 RPM, 11 1/2" THRU HOLE

• Manufacturer: Lodge & Shipley

“NOT TESTED” LODGE & SHIPLEY RIGHT ANGLE LATHE SERIAL NO. 41254 60" SWING 1-65 RPM 11 1/2" THRU HOLE SONGY D.R.O WEIGHT: 10,000+ LBS SDL/#12263/SURPLUS/ (1) E

HERCULES AJAX MAZAK 18" GAP BED LATHE 3 PHASE 5' WORKING BED 7-1/2 HP 230 VOLTS

• Manufacturer: Mazak
• Phase type: Three-phase

“NOT TESTED” HERCULES MAZAK 18 THRU HOLE: 2-1/2" 18" PLATE 24" W/O BED SWING OVER BED STEADY REST TAIL STOCK TOOL HOLDER TRANSVERSE VARIABLE SPEED 7-1/2 HP 230 VOLTS 3 PHASE 5' WORKING BED OAD: 110" X 40" X 75" S...

CLAUSING- COLCHESTER VS 13 IN VARIABLE SPEED LATHE CENTER DISTANCE: 25 IN

• Manufacturer: Clausing/Colchester
• Model: 13VS

BRAND: CLAUSING-COLCHESTER ITEM: VARIABLE SPEED LATHE MODEL #: VS 13 IN CAPACITY: HEIGHT OF CENTER: 6.7" SWING OVER BED: 13.75" SWING IN GAP: 21" WIDTH IN FRONT FACEPLATE: 6.5" SWING OVER CROSS SLIDE: 7.75" BEDWA...

Rockwell lathe

• Manufacturer: Rockwell

Rockwell lathe Serial: 1285735 Dimensions Overall Length: 64" Electric Motor Rockwell 84-120 HP: 3/4 Volts: 208/220-440 Phase: Three

Rockwell lathe

• Manufacturer: Rockwell

Rockwell lathe Serial: 1285735 Dimensions Overall Length: 64" Electric Motor Rockwell 84-120 HP: 3/4 Volts: 208/220-440 Phase: Three

GAP BED ENGINE LATHE 24X120 SWING SIZE 24" THROUGH HOLE SIZE 4-1/4" 20 HP 4 JAWS

“NOT TESTED” GAP BED ENGINE LATHE 24X120 SWING OVER BED SIZE 24" DISTANCE BETWEEN CENTERS: 120" THROUGH HOLE SIZE 4-1/8" 20 HP 4 JAWS LENGTH OF BED 160" CHUCK 15" SPINDLE SPEED 12-1200RPM APPROX. DEMINSIONS 190"x...

BISON 055598 8" DIAMETER 3 JAW LATHE CHUCK MANUAL

• Manufacturer: Bison

“SOME WEAR, SOME RUST” BISON 055598 3 JAW LATHE CHUCK 8" DIAMETER OAD: 8" X 8" X 6" WEIGHT: 30 LBS GL/#1162/SKID 301/(1)OZ

SCHAUER MFG. CORP. LATHE LA2E

• Manufacturer: SCHAUER

“NOT TESTED, SOME WEAR” SCHAUER MFG. CORP. LATHE LA2E SCHAUER MFG. CORP. LATHE LA2E 440 VOLT 3PH 60CYCLE1/2 HP 840 RPM 1.1 AMP1 HP 1725 RPM 1.4 AMP~COLLETS~UNBRANDED 51/64UNBRANDED 7/8HARDINGE 1/2UNBR...

UNBRANDED LATHE CHUCK ADAPTER BACK PLATE 10" CHUCK

“HAS SOME SURFACE RUST” UNBRANDED LATHE CHUCK ADAPTER BACK PLATE 10" CHUCK FOR ADJUSTABLE SELF-CENTERING CHUCKS SPINDLE NOSE TYPE SERIES D D1-6 MOUNT 10" OD THROUGH HOLE DIAMETER: 3" MATERIAL: STEEL INSIDE DIAMET...

UNBRANDED LATHE CHUCK ADAPTER BACK PLATE 10" CHUCK

• Manufacturer: Sin Marca

“HAS SOME SURFACE RUST” UNBRANDED LATHE CHUCK ADAPTER BACK PLATE 10" CHUCK FOR ADJUSTABLE SELF-CENTERING CHUCKS SPINDLE NOSE TYPE SERIES D D1-6 MOUNT 10" OD THROUGH HOLE DIAMETER: 3" MATERIAL: STEEL INSIDE DIAMET...