Used Metalworking Measuring Instruments in Saxony, Germany

PAGUS alignment plate

• Manufacturer: Pagus

Straightening plate, straightening table, spotting plate PAGUS Heavy version

PAGUS alignment plate

• Manufacturer: Pagus

Straightening plate, straightening table, spotting plate PAGUS used, tested!

PAGUS alignment plate

• Manufacturer: Pagus

Straightening plate, straightening table, spotting plate PAGUS used, tested!

PAGUS alignment plate

• Manufacturer: Pagus

Straightening plate, straightening table, spotting plate PAGUS used, tested!

PAGUS alignment plate

• Manufacturer: Pagus

Surface plate, surface table, with base frame PAGUS used, tested!

SOMET tool setting device

• Manufacturer: Somet

Tool presetter SOMET SPS 200 U Measuring unit from OFD Feinmess Dresden x = 144.525 setting values y = 248.7 Angle measuring system meopt. PMP 100 from 0-180° on base frame used, tested!

FEINMESS. SUHL Dial gauge for gears

• Manufacturer: FEINMESS. SUHL

Dial indicator for gears, tooth width measurement Feinmesszeugfabrik Suhl Module 1 to 2 S6 in wooden case used, tested!

SEW Drehmomentstütze

Drehmomentstütze SEW KA107 6434436 0643 4436 / M14R Aufnahme für Gummipuffer: Ø 54 mm, Länge: 92 mm Gummipuffer: Ø 57 mm, Länge: 100 mm, mit Metallbuchse: Ø 25 mm ( Innen ) Neu !

SOMET tool setting device

• Manufacturer: Somet

Tool Presetting Machine SOMET SDJ 300 2x ISO 40 Interchangeable Bushings 1x ISO 45 Interchangeable Bushings 1x ISO 50 Interchangeable Bushings 1x ISO 50 Test Mandrel on Base used, tested!

SIEMENS signal cable

• Manufacturer: Siemens

Signal cable, adapter cable, control cable, interface cable SIEMENS MOTION-CONNECT 6FX2002-1YB02-1BA0 New !

FEINMESS. SUHL outside micrometer

Outside Micrometer Feinmesszeugfabrik Suhl TGL 15046/I (DIN 863/I) Division: 0.01 mm with protective case used, tested!

STRIKO WESTOFEN heating element plug

Heizstabstopfen, Stopfen, gegossen STRIKO WESTOFEN 89660000 Außendurchmesser ( Zylinder ): Ø 120 mm, Länge: 185 mm Spitzendurchmesser ( Kegelstumpf ): Ø 98 / 92 mm, Länge: 100 mm Neu !

PAGUS hinge bolt clamp

• Manufacturer: Pagus

Gelenkbolzenschelle, Rohrschelle, 150 Stück PAGUS Andere Mengen auf Anfrage ! Neu ! Abmessungen ( einzelne Rohrschelle ) : 55 x 52 x 20 mm

GEDORE Drehmomentschlüssel

Drehmomentschlüssel GEDORE DREMOMETER® Typ B gebraucht, geprüft !

LANDEFELD copper sealing ring

Dichtring, 80 Stück LANDEFELD DR 112 Cu Material: Kupfer ( Cu ) Andere Mengen auf Anfrage ! Neu !