Used Machine Tools in Aichi, Japan

Machine Tool Peripherals/Others/Workpiece Gripper

Chuck: 8 inches If there is any discrepancy between the description and the actual product, the actual product will be given priority.

EROWA Tools/ Tools/Manual Clamp Chucks

• Manufacturer: Erowa

Chuck outer diameter: Φ80 mm If there is any discrepancy between the description and the actual product, the actual product will be given priority.

Tools/ Tools/V-groove square block

300 x 300 x 300mm If there is any discrepancy between the description and the actual product, the actual product will be given priority.

EROWA Tools/ Tools/Manual Clamp Chuck with Block

• Manufacturer: Erowa

Chuck outer diameter: Φ80 mm,. Block dimensions: 80 x 80 x 80 mm In case of any discrepancy between the description and the actual product, the actual product will be given priority.

unidentified BT40 Tool

• Manufacturer: unidentified

BT40, Tool 25

NIKKEN BT50-SLO-25-150 Tool

• Manufacturer: Nikken

Side through

Trusco Nakayama / Cabinets, Workbenches / Tool Racks

• Manufacturer: Trasco Nakayama

For BT50,. Holders: 40 pcs. Dimensions: (Width)750(Depth)620(Height)1500mm Number of sections: 8 In case of any discrepancy between the description and the actual product, the actual product shall take precedence.

Tools/Vices, Blocks, Clamps/Two-sided Angle Plates

Work surface dimensions: (W) 1000 x (H) 850mm Base dimensions: (W) 820 x (D) 800 x (T) 55mm Base mounting holes: M16, 640mm pitch Total height: 1065mm T-slots: 18mm x 6 (each side) *If there are any discrepancies...

Others / Cabinets and Workbenches / [Bid No. 419-421] Tool Stand

For BT50 *If there are any discrepancies between the product description and the actual product, the actual product will take precedence.

JAM/Japan Automatic Machine AP100

• Manufacturer: JAM/Japan

Material: SKS,. Hardness: HRC60°,. Dimensions: (D)90*(W)90*(H)100㎜,,, Weight: 2.4kg Weight: 2.4kg In case of any discrepancy between the description and the actual product, the actual product shall take priority.

1996 Okamoto Machine Tool PFG-525

• Manufacturer: Okamoto
• Model: PFG-525

T:480*200mm,. Sine bar chuck, (OD)φ180-205*(W)10-20*(ID)φ31.75mm Grinding wheel: (OD)φ180-205*(W)10-20*(ID)φ31.75mm, All manual In case of any discrepancy between the description and the actual product, the actua...

2002 Okamoto Machine Tools PSG-52DX

• Manufacturer: Okamoto
• Model: PSG-52

T: 550*200 Table travel: (left/right) 650*(front/back) 230mm Grinding wheel: (outer diameter) φ205*(width) 19*(inner diameter) φ50.8mm *If there are any discrepancies between the product description and the actua...

2012 Okamoto Machine Tool PFG-500II

• Manufacturer: Okamoto
• Model: PFG-500

T:600*140mm,. Table travel: (left/right)540*(front/back)180mm, Grinding wheel: (OD)φ160*(W)6-32*(I.D.φ31.75) All manual In case of any discrepancy between the description and the actual product, the actual produc...

2007 Okamoto Machine Tool Works IGM-15NC

• Manufacturer: Okamoto
• Model: IGM-15NC

FANUC-18iTB, Grinding hole diameter: 6 to 150 mm dia. Grinding length: 125mm, Swing over table:φ600mm, Swing inside chuck cover:ø260mm, S:X170*Z500mm, Grinding wheel axis ~850rpm, 3-jaw chuck (GAMET 315MAC), Wate...

unidentified 500□ unidentified

• Manufacturer: unidentified

500□