2005 Ideal
- Manufacturer: Ideal
BOX 6M X 2M 30M X 1M 0.70M RISER 0.50M RISER SPRING-LOADED TRAILER 4 WHEELS 550/60R22.5
1998 Demarest D 185 MN
- Manufacturer: Demarest
- Model: D 185 MN
Demarest trailer Length: 5.5 m; Height: 0.8 m and Width: 2.20m + 2 x 50 cm extensions Silage box never used Hydraulic door Bogie axles with follower Compressor + direct tractor tipping
1995 Rolland TURBO 13
- Manufacturer: Rolland
- Model: TURBO 13
Rolland Trailer 1m side and three sets of 0.32 steel risers Hydraulic door Leaf spring drawbar Fixed balance arm Trailer available by mid-June
2025 Rolland RS 6835
- Manufacturer: Rolland
- Model: RS 6835
- Gross weight: 24,000 kg
2025 plated 1.50 m monocoque body Silage equipment consisting solely of 6 1 m aluminum panels + NEW steel posts Perforated front fascia extension with Plexiglas (Better visibility 1 m) Doubled and twin UPN chassi...
Étrelles, France
1999 Rolland TURBO 160
- Manufacturer: Rolland
- Model: TURBO 160
Rolland Trailer Side of 1m and two sets of 50 cm risers. 1 steel and 1 aluminum Hydraulic door Leaf spring drawbar Fixed balance arm Trailer Available for mid-April
Étrelles, France
2000 Chevance CHEVANCE RC 150
- Manufacturer: Chevance
CHEVANCE Rc 150 Dump Bed Payload 15T Alliance pneumatic 550/60R22.5 Bogie axle Container 1m x 6m x 2m Cereal RACKS STEEL | SILAGE RACKS ALUMINUM: 100 cm raise Silage volume 24 m3
2025 Rolland RS 7840
- Manufacturer: Rolland
- Model: RS 7840
- Gross weight: 32,000 kg
Plated 2025 1.50 m monocoque body Silage equipment only consisting of 6 panels 1 M ALU + NEW steel posts Mounting Perforated PERFORER front extension (better visibility 0.70 ) Twinned UPN chassis (TP design) 5 mm...
Étrelles, France
2007 ACTM PORTE ENGIN
- Manufacturer: Actm
- Model: PORTE ENGIN
2-axle, twin-wheel, turret-mounted equipment carrier Air brakes Hydraulic ramp Floor in very good condition Storage compartment Hydraulic boom No current registration document 3.15m canopy height 1.5m drop height...
1994 Rolland TURBO 10
- Manufacturer: Rolland
- Model: TURBO 10
Approximate year: Yes | Capacity: 10,0 T | Axles: bogie | Approved speed: 25,0 Km/h | Braking mode: hydraulic | First hand: Yes | Availability: Available
Iffendic, France2002 Jeantil GM180
- Manufacturer: Jeantil
hydraulic door Capacity: 18,0 T | Axles: bogie | Approved speed: 25,0 Km/h | Braking mode: hydraulic | Availability: Available
Iffendic, France
Tip: Enter manufacturer, model or keyword