Building Filters
Machinery
Description Technical characteristics Head tilt up to 22.5 the clockwise/anticlockwise (and intermediate positions) Built-in protectors 600 mm diameter carbide cutting disc Three-phase motor 400V 50/60 Hz 3 Kw 2,...
Thessaloniki, Greece
Machinery
Description Technical characteristics Head tilt up to 22.5 the clockwise/anticlockwise (automatic setting in 22.5 the , 45 the , 90 the ) Manual head tilt adjustment at intermediate angles (mechanical stop) Built...
Thessaloniki, Greece
Machinery
Description Basic accessories SIKA PLUS M 400 mm diameter tungsten carbide cutting disc Complete protective cutting area kit No.2 horizontal pneumatic vises Lubrication system with spray device Pre-installation f...
Thessaloniki, Greece
Machinery
Description Key components KAIMAN 700 THETA 700 mm diameter tungsten carbide cutting disc Cutting Area Protection Kit (Pneumatic Opening) No.2 horizontal vices Micro-drop disc lubrication system with pure oil Pre...
Thessaloniki, Greece
Machinery
Description Basic components SPRING 45 A 450 mm diameter tungsten carbide cutting disc No.2 horizontal pneumatic vices Pre-installation for extracting grease and fumes Complete protective kit around the cutting a...
Thessaloniki, Greece
Machinery
Description Basic parts PANDA 550 THETA 550 mm diameter tungsten carbide cutting disc Horizontal vise No.2 vertical vises Cutting area protection kit Air gun with spiral hose (for cleaning the machine) Micro-drop...
Thessaloniki, Greece
Machinery
Description Basic components SPRING 45 E 450 mm diameter tungsten carbide cutting disc Spray lubrication of tool No. 2 horizontal pneumatic vise Pre-installation for extracting grease and fumes Complete protectiv...
Thessaloniki, Greece
Machinery
- Manufacturer: Fom Industrie
Description SPRING 55 key components 550 mm diameter tungsten carbide cutting disc Disc lubrication system with spray device Cutting area protection kit No.2 horizontal pneumatic vises Full protective kit around ...
Thessaloniki, Greece
Cutting machines
Description Technical characteristics TR 152 No. 2 tungsten carbide cutting discs with a diameter of 550 mm Checklist No.4 vertical clamps on each head No.1 horizontal clamp on each head Movable reel head (2m) US...
Thessaloniki, Greece
Machinery
Description Basic accessories SPRING 45 THETA 450 mm diameter tungsten carbide cutting disc No.2 horizontal pneumatic vices Pre-installation for extraction of shavings and fumes Complete protective kit around the...
Thessaloniki, Greece
Machinery
Description Standard equipment Carbide cutting disc with a diameter of 400 mm Side support plates on both sides Cutting angle from 45 The counterclockwise up to 45 The clockwise on a vertical axis and 45 The cloc...
Thessaloniki, Greece
Machinery
Description Technical characteristics ALVA 55 THETA Cutting from 22.5 o to 90 o with electronic control at each intermediate degree Direct motor transmission Motor power: 2.2 kW Hydro-pneumatic disc feed (adjusta...
Thessaloniki, Greece
Machinery
Description Technical characteristics Head tilt: 90°- 45°- 22.5° and intermediate angles through front mechanical stops suitably protected from chips No. 2 carbide cutting discs with a diameter of 500 mm Hydrauli...
Thessaloniki, Greece
Machinery
Description Technical characteristics ALVA 55 Pneumatic tilting of heads at 90 o -45 o – 22.5 o Intermediate angles via stops at the front of the machine Direct motor transmission Motor power: 2.2 kW Hydro-pneuma...
Thessaloniki, Greece
SAW MECAL SW 400M
- Manufacturer: MECAL
Single-head aluminum saw, manual descent of the disc. Very sturdy construction made of cast steel, with bearings on the turntable. Protective cover, which is divided into 2 parts, completely protects the operator...
Agios Dimitrios, Greece