Used Wire Machinery

Wire Bending Bench

Wire Bending Bench

RMG Model 34--034-01 Autodraw Wire Drawing Machine

• Manufacturer: RMG

RMG Model 34--034-01 Autodraw Wire Drawing Machine, 20" Dia. Torque Hub, 230V, 8.5A, 60 Hz, 3PH, S/N 8303931, Machine No. 23 (Supplied Machine No. 150)

RMG Model 45-0546-87 Autodraw Wire Drawing Machine

• Manufacturer: RMG

RMG Model 45-0546-87 Autodraw Wire Drawing Machine, 20" Dia. Torque Hub, ABB 7.5HP VFD, 230V, 15A, 60 Hz, 3PH, S/N 96083895 Machine No. 5, (Supplied Machine No. 172)

1967 NILSON S3F #1156722

• Manufacturer: Nilson
• Model: S3F

New: 1967 | Slides: 4 | Wire diameter: 3/16" | Strip width: 2" | Length of feed: 15" | Front slide stroke: 1.75" | Side slides stroke: 3.5" | Back slide stroke: 1.75" | Stripper stroke: 2" | Press stroke: 1" | D...

Fastener Engineers Inc. Model WR-01-16 Wire Drawing Machine

• Manufacturer: Fastener Engineers

Fastener Engineers Inc. Model WR-01-16 Wire Drawing Machine, S/N 1741970, (Not in Service)

Fastener Engineers Inc. Model DT-05-24 Wire Drawing Machine

• Manufacturer: Fastener Engineers

Fastener Engineers Inc. Model DT-05-24 Wire Drawing Machine, 9-70 FPM Speed Range, 42,000 In.-Lb. Torque, S/N 1731599,Machine No. 17 (Not in Service)

Fastener Engineers Model WR-01-16 Wire Drawing Machine

• Manufacturer: Fastener Engineers

Fastener Engineers Model WR-01-16 Wire Drawing Machine, 20" Dia. Torque Hub. Machine No. 3, (Supplied Machine No 204)

U.S. BAIRD #8 #0509519

• Manufacturer: U.S. Baird
• Wire diameter: 12,700 millimeter

SPECIFICATIONS: Machine Specifications EQUIPPED WITH: - SPLIT CAMS - AIR CLUTCH - 2 SIDED (DOUBLE) SLIDE GIBS - FRONT, REAR, LEFT & RIGHT SLIDES - POSITIVE STOCK CHECK - AUTOMATIC LUBE SYSTEM - ENCLOSED GEARING -...

NILSON S1G #1500320

• Manufacturer: Nilson
• Model: S1G

Machine Specifications: Serial 40084 40122 Model S1F

Fastener Engineers Inc. Model DT-02-20 Wire Drawing Machine

• Manufacturer: Fastener Engineers

Fastener Engineers Inc. Model DT-02-20 Wire Drawing Machine, S/N 668784, (Not in Service)

Fastener Engineers Model DH-190-250-24 Wire Drawing Machine

• Manufacturer: Fastener Engineers

Fastener Engineers Model DH-190-250-24 Wire Drawing Machine, 5.9 HP, 24" Dia. Torque Hub, S/N 1269941, Machine No. 7, (Supplied Machine No. 173)

Fastener Engineering Inc. Model DTHA-05-20 Wire Drawing Machine

Fastener Engineering Inc. Model DTHA-05-20 Wire Drawing Machine, 26,000 In./Lbs. at 1 FPM, 68 FPM Max, S/N 1188/6314, Machine No. 32, (Not in Service)

Fastener Engineers Inc. Model DTHA-05-28 Wire Drawing Machine

• Manufacturer: Fastener Engineers

Fastener Engineers Inc. Model DTHA-05-28 Wire Drawing Machine, 32700 In/Lbs. Torque at 58 FPS, 44,470 In./Lbs. Torque at 30 FPM, S/N 989/6448, (Not in Service)

U.S. BAIRD #8 #0305520

• Manufacturer: U.S. Baird
• Wire diameter: 12,700 millimeter

SPECIFICATIONS: Machine Specifications EQUIPPED WITH: - SPLIT CAMS - MECHANICAL CLUTCH - 2 SIDED (DOUBLE) SLIDE GIBS - FRONT, REAR, LEFT & RIGHT SLIDES - POSITIVE STOCK CHECK - AUTOMATIC LUBE SYSTEM - ENCLOSED GE...