Used Machine Tools in Greater Poland, Poland

BLUM Procer hinge drill

• Manufacturer: Blum

BLUM Procenter Hinge Drilling Machine Manufacturer: Blum Type: Pro-Center Year of Manufacture: 2005 Drilling and inserting hardware vertically and horizontally using various drilling heads, 17-spindle drilling he...

SCM Nova TI 105 milling machine

• Manufacturer: SCM / SCMI

Technical data: The length of the trolley: 120 cm | Shank size: 30 mm | Replaceable pin: Yes | Speed regulation: Yes, 4 speeds | Engine size: 7 KW

Wide belt grinder Felder FW 1102 C

• Manufacturer: Felder

WIDE BELT GRINDER Felder FW 1102 C grinding width 1100 MM, grinding height 3-170mm 1 unit with calibration rubber shaft with hardness 85, Second unit combined with rubber shaft + grinding foot with smooth pressur...

Low long spindle milling machine Felder F 700 M

• Manufacturer: Felder

Felder F 700 M vertical spindle milling machine Electric up-down spindle regulation and manual angle adjustment from 0 to +45 degrees spindle chuck Ø30 interchangeable long beds 215cm 4 spindle speeds 5.5KW motor...

Hettich hinge drill

• Manufacturer: Hettich

Hettich hinge drilling machine 380V power supply drilling vertically and horizontally 3 drilling heads rotating heads, parallel position - row of holes or perpendicular position stroke of drilling head pneumatic ...

Felder 21 Spindle Drill

• Manufacturer: Felder

Felder 21 Spindle Drill 21 spindles left/right spindles spindle spacing 32mm drilling in vertical, horizontal or at an angle 2 pneumatic clamps power supply 380V, 1.5KW machine used in good condition

Zangheri multi-spindle drilling machine 2 heads

Zangheri MULTI-SPINDLE DRILLING MACHINE, 2 x bottom drilling heads with 21 spindles each, maximum vertical head spacing 800mm, drills mounted with quick-release couplings, left/right spindles, spindle spacing 32m...

Masterwood K21 Multi-Spindle Drill

• Manufacturer: Masterwood

MASTERWOOD MULTI-SPINDLE DRILLING MACHINE, 21 spindles, left/right spindles, quick-release mounting, 32mm spindle spacing, vertical or horizontal drilling, pneumatic clamps, 380V power supply, The machine is full...

Lasm double-sided edge sander

• Manufacturer: Volpato - Lasm

Belt height: 150mm | Oscillation: Mechanical | Electricity demand: 3.6KW | Table adjustment: at an angle | Angle stop: in the countertop

Slotting machine Felder F 700 Z

• Manufacturer: Felder

Slotting machine Felder F 700 Z moving trolley in the table 205 cm, spindle adjustable up-down and at 0-45 degrees spindle Ø 30 interchangeable, motor 7.3 kW, electric brake left-right rotation 4 speed settings V...

Robland circular saw with carriage and milling machine

• Manufacturer: Robland

Robland saw and milling machine, two 2.2 kW, 380V motors, adjustable saw blade up and down and at an angle of 0-45°, milling spindle diameter 30 mm, two spindle speeds: 3000 and 6000 rpm, machine tested and ready...

Griggio 940 Band Saw

• Manufacturer: Griggio

Griggio Band Saw Wheel width: 940mm 5.5kW motor, 380V power supply Tilting table Band dimensions: min. 6590 - max. 6710mm Machine dimensions: h: 286cm, w: 160cm, l: 100cm (can be transported horizontally) Machine...

Altendorf tkr 45 sliding table saw

• Manufacturer: Altendorf

Altendorf TK R 45 sliding table saw, 140cm carriage, 5.5kW main motor, 400 blade capacity, Hydraulically adjustable blade tilt and up-down, 85cm cutting width on the right side, Machine in good condition.

SCM nova si40 sliding table saw

• Manufacturer: SCM / SCMI

SCM Nova Si40 Sliding Table Saw 320cm carriage, 7kW main motor, 0.75kW scoring unit, Right-side motorized culage up to 1226mm, 2 speeds: 3500 and 5000 rpm, Digital readout on the carriage, Used machine, very good...

Panhnas 690 type 320cm sliding table saw

Panhans sliding table saw, 320 cm carriage on bars, hydraulic up-down and angle adjustment of the saw blade, 5.5 kW main motor, separate scoring unit, 3 cutting speeds, maximum blade size 400 mm, machine in good ...