Assembly of bending device (TZ 200.11)
GUNT course: engineering drawing Description: A drawing is the most important means of information and communication in engineering. The ability to read and understand drawings, graphics and schematics is a funda...
Alberton, South Africa
Free vibrations in a bending beam (SE 110.58)
natural frequency on the freely vibrating bending beam Description: An oscillator, which is left alone after a single excitation, performs free vibrations. The frequency of the free vibration is the natural frequ...
Alberton, South Africa
Deformation of bars under bending or torsion (WP 100)
elastic deformation of statically determinate or indeterminate beams under bending load Description: Bending and torsion are typical loads to which components are subjected. The resultant stresses and deformation...
Alberton, South Africa
Los Angeles Abrasion Safety Guard Set (LAG179)
For LAG175 Los Angeles Abrasion Machine Three panel system. Each one measures 800mm high x 970mm wide x 30mm thick and weighs just 3 kg, with a 150mm x 200mm “Caution” warning sign on each panel. Due to the conti...
Alberton, South AfricaSpecimen Mould TO BS812-113 (LAG170/1)
With tray set to BS812:113 Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.
Alberton, South Africa150 mm ACV Measure to BS812-110 (LAG155/1)
Spare for 150mm ACV to BS812:110 Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.
Alberton, South AfricaAggregate Crushing Value TO BS812-110 (LAG160)
75mm ACV apparatus to BS812:110 The 75mm ACV apparatus consists of steel cylinder with a nominal diameter of 75mm, a plunger and a baseplate. All surfaces that come into contact with the aggregate are case-harden...
Alberton, South AfricaTamping Rod TO BS812-110 (LAG161)
For 75mm ACV to BS812:110 Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.
Alberton, South AfricaAIV Blow Counter (LAG165/2)
Spare for AIV Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.
Alberton, South AfricaAbrasive Charges ASTM (LAG178)
Set of charges to ASTM, AASHTO, CNR, UNI, UNE, NLT Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.
Alberton, South AfricaAbrasive Charge Set TO EN1097-1 (LAG180/2)
For use with micro deval, 5kg to EN 1097-1 Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.
Alberton, South AfricaMounted Rubber Slider (Original) TO BS812-114, EN1097-8 (LAG190/3)
Single slider – site use BS812-114 Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.
Alberton, South AfricaMounted Rubber Slider (Original) TO BS812-114, EN1097-8 (LAG190/1)
Single slider – lab use BS812-114 Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.
Alberton, South AfricaBaseplate (Universal) TO BS812-114, EN1097-8 (LAG191)
With specimen mounting block – lab use BS812-114 Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.
Alberton, South Africa3 Inch 4S Slider 96 (LAG192)
For lab use Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.
Alberton, South Africa
Tip: Enter manufacturer, model or keyword