Processing » Heat Exchangers » Shell and Tube Heat Exchangers » Illinois

Building Filters

144

Used Shell And Tube Heat Exchangers in Illinois, USA

  • Southern Heat Exchanger 733 sq.

    Southern Heat Exchanger 733 sq. ft. Vertical Shell & Tube Heat Exchanger – Carbon Steel Shell, 316L SS Tubes

    • Manufacturer: Southern Heat ExchangerSouthern Heat Exchanger

    10749149 Used Southern Heat Exchanger 733 sq. ft. Vertical Shell & Tube Heat Exchanger Carbon Steel Shell, 316L SS Tubes. 24" diameter x 10'0" f/f. 75fv psi @ 300 deg. F shell. 75fv @ 300 deg. F. tubes. With ex...

    Belvidere, IL
  • Trusted Seller
    GOE General Oil Equipment Heat

    GOE General Oil Equipment Heat Exch Tube in Tube 133 GAL

    • Manufacturer: GOE General Oil Equipment

    General Oil Equipment, 133 gallon, stainless steel holding loop. Equipped with 389¾ ft of 3" stainless steel tubing with 3½" OD / 3" ID Tri-clamp style inlet and outlets. Mounted on a stainless steel frame. For a...

    Carol Stream, IL
  • Tranter GmbH Horizontal Spiral Heat

    Tranter GmbH Horizontal Spiral Heat Exchanger

    • Manufacturer: TranterTranter

    53326002 Unused- Tranter GmbH Horizontal Spiral Heat Exchanger, Total Surface Area 194.9 Square Meter (Effective area 1,980 Square Feet), Carbon Steel. Shell & coil each rated Full Vacuum/24.5 bar (355 psi) at -4...

    Belvidere, IL
  • Southern Heat Exchanger Corp. 304L

    Southern Heat Exchanger Corp. 304L Stainless Steel Horizontal Heat Exchanger, Approximately 8500 sq. ft

      53267117 Used Southern Heat Exchanger Corp. 304L Stainless Steel Horizontal Heat Exchanger, Approximately 8500 sq. ft. 51" diameter X 26' face to face length. 304L Shell rated 110/FV @ -20 to 650 F. (1294) 304L t...

      Belvidere, IL
    • Tranter GmbH Horizontal Spiral Heat

      Tranter GmbH Horizontal Spiral Heat Exchanger

      • Manufacturer: TranterTranter

      53326001 Unused- Tranter GmbH Horizontal Spiral Heat Exchanger, Total Surface Area 194.9 Square Meter (Effective area 1,980 Square Feet), Carbon Steel. Shell & coil each rated Full Vacuum/24.5 bar (355 psi) at -4...

      Belvidere, IL
    • Trusted Seller
      Vertical Condenser Heater

      Vertical Condenser Heater

      • Manufacturer: Unknown

      Vertical Condenser Heater Calentador De Condensador Vertical

      Illinois, USA
    • Shell & Tube Heat Exchanger,

      Shell & Tube Heat Exchanger, U Tube

      • Manufacturer: Ilsung CorporationIlsung Corporation

      48291061 Unused- 4 Pass U Tube Shell & Tube Heat Exchanger, Approximate 3409 Square Feet, Tema Type AEU, Carbon Steel, Horizontal. Shell rated 369psi/Full Vacuum at 392 degrees F., (368) 3/4" diameter x 288" long...

      Belvidere, IL
    • Ellett Industries Shell & Tube

      Ellett Industries Shell & Tube Heat Exchanger.

      • Manufacturer: Ellet MfgEllet Mfg

      50420004 Used Ellett Industries Shell & Tube Heat Exchanger, 930 Square Foot. Horizontal. Single pass. (237) Zirconium (SB-523) 3/4" diameter x 20' long tubes rated 165 psi / FV at -20 to 550 degrees F. 304L Stai...

      Belvidere, IL
    • Southern Heat Exchanger 8500 Sq.

      Southern Heat Exchanger 8500 Sq. Ft. 304L Stainless Horizontal Heat Exchanger – 51" x 26', Built 2019

        53267102 Used Southern Heat Exchanger 8500 Sq. Ft. 304L Stainless Horizontal Heat Exchanger . 51" diameter X 26' face to face length. 304L Shell rated 110/FV @ -20 to 650 F. (1294) 304L tubes rated 110/FV @-20 to...

        Belvidere, IL
      • Groen DR1218 Scraped Surface Heat

        Groen DR1218 Scraped Surface Heat Exchanger/ Evaporator

        • Manufacturer: Groen

        52304001 Used Groen Scraped Surface Heat Exchanger/ Evaporator, Model DR 1218, 304 Stainless Steel. Approximate heat surface area 9.5 square feet. Approximate 12" diameter x 18" long, with (3) scrapers. Internal ...

        Belvidere, IL
      • Doyle & Roth 1,824 Sq

        Doyle & Roth 1,824 Sq Ft. Heat Exchanger

        • Manufacturer: Doyle & RothDoyle & Roth

        52052015 Used Doyle & Roth Shell & Tube Heat Exchanger, 1,824 Square Feet. (929) 304 stainless steel .75" diameter x 10' long Tubes rated 86 psi/ FV at 400 degrees F. Carbon steel Shell rated 150 psi at 150 degre...

        $4,500 USD
        Belvidere, IL
      • P.X. Engineering U Tube Heat

        P.X. Engineering U Tube Heat Exchanger

        • Manufacturer: PX EngineeringPX Engineering

        31729 Unused- PX Engineering U Tube Heat Exchanger, 4611 Square Feet, Horizontal. Carbon steel shell rated 150 psi at 200 degrees F. (668) 5/8'' Diameter x 252'' long 304 stainless steel tubes rated 75 psi at 212...

        Belvidere, IL
      • Ilsung Single Pass Shell &

        Ilsung Single Pass Shell & Tube Heat Exchanger

        • Manufacturer: Ilsung CorporationIlsung Corporation

        48291049 Unused- Single Pass Shell & Tube Heat Exchanger, Approximate 8254 Square Feet, Tema Type AEL, Horizontal. Carbon steel shell rated 527psi/Full Vacuum at 230 degrees F. (1952) 3/4" diameter x 264" long 22...

        Belvidere, IL
      • Doyle and Roth Vertical Shell

        Doyle and Roth Vertical Shell and Tube Heat Exchanger.

        • Manufacturer: Doyle & RothDoyle & Roth

        52862012 Used Doyle and Roth Approximate 20.2 Square Feet Vertical Shell and Tube Heat Exchanger. Carbon steel shell rated 150 psi / FV at -20 to 200 degrees F. (27) .75" diameter x 48" long Hastelloy C-276 tubes...

        $6,500 USD
        Belvidere, IL
      • Cataract Steel Industries Shell and

        Cataract Steel Industries Shell and Tube Heat Exchanger

          52862014 Used Cataract Steel Industries Shell and Tube Heat Exchanger, Model SG-33006-SETT, Approximate 21.2 Square Feet. Carbon steel shell rated 60 psi at -20 to 300 degrees F. (27) 3/4" diameter x 48" long 316...

          $4,500 USD
          Belvidere, IL
        34567

        Overview

        Heat exchangers are devices designed to transfer heat between two or more fluids without mixing them. They are widely used in various industries such as HVAC, power generation, chemical processing, and automotive to efficiently manage heat transfer processes. Common types include shell and tube, plate, and air-cooled heat exchangers.

        FAQ

        What factors should I consider when purchasing a heat exchanger?

        Consider the type of fluids involved, the required heat transfer rate, operating temperatures and pressures, and the specific application. It's also important to look at the material compatibility and maintenance requirements.

        How can I ensure my heat exchanger is shipped safely?

        Use a reputable shipping service experienced in handling industrial equipment. Ensure the heat exchanger is properly packed, secured, and protected against damage during transit.

        What maintenance is required for a heat exchanger?

        Regular maintenance includes inspecting for leaks, cleaning to remove fouling, checking for corrosion, and ensuring all connections and seals are intact. Follow the manufacturer’s recommendations for detailed maintenance procedures.