Used Heat Exchangers in New Jersey, USA

Carbon Steel Alfa Laval Spiral Heat Exchanger - IPP# 201666

• Manufacturer: Alfa-Laval

Additional Info:

Hastelloy - C276 Alfa Laval Spiral Heat Exchanger - IPP# 233192

• Manufacturer: Alfa-Laval

with 304 SS heads faced with Hastelloy C-276(0.105" thick) Inner channel spacing-Hot side 3/8", outer channel spacing cold side 1/4" 45" wide x 28" deep x 46" high.

Stainless Steel 321 Shell and Tube Heat Exchanger - IPP# 236148

• Manufacturer: Carl Capito

Shell has expansion bellows

Stainless Steel 316 Shell and Tube Heat Exchanger - IPP# 210814

• Manufacturer: Manning & Lewis

Job #: 160771

Stainless Steel 316 Shell and Tube Heat Exchanger - IPP# 210788

• Manufacturer: Yula

Shell with an MDMT of 32 degrees F at 150 psi. Tubes with an MDMT of 32 degrees F at 150 psi.

Stainless Steel 304 Shell and Tube Heat Exchanger - IPP# 216090

Cooling water nozzles: 3"

Stainless Steel 316 Shell and Tube Heat Exchanger - IPP# 209744

• Manufacturer: Monticello Tank Co.

Job #: T102099 C-2 shell MDMT rated for -20 degrees at 180/FV. Tube MDMT rated for -20 degrees F at 150/FV.

Stainless Steel 316 Shell and Tube Heat Exchanger - IPP# 209742

• Manufacturer: Monticello Tank Co.

Job #: Y102099C1 shell MDMT is rated for -20 degrees F at 185/FV. tubes MDMT is rated for -20 degrees F at 152/FV psi. U bend tubes, 0.375" od X 0.049" thick.

Stainless Steel 316 Shell and Tube Heat Exchanger - IPP# 207464

• Manufacturer: Ketema

Size is 10-A-108 Shell side MAWP is 150 psi at 400 degrees F. MDMT; is -20 degrees at 150 psi

Stainless Steel APV Plate and Frame Heat Exchanger - IPP# 204579

• Manufacturer: APV

maximum temperature is 410 degrees F

Stainless Steel 316 Plate and Frame Heat Exchanger - IPP# 232712

• Manufacturer: APV/Hebeler

Minimal design metal temp.=-20 degrees F at 200 psi.

Stainless Steel 304 Plate and Frame Heat Exchanger - IPP# 216388

Certification: Certified by WFT GmbH MDMT 319 degrees F at 450 psi Volume: 89.70/90.3 WD (Water Distribution): 10-300

Stainless Steel 316 Plate and Frame Heat Exchanger - IPP# 214850

• Manufacturer: Alfa Laval

CRN L-4646.57 Print weight is 6247 lbs The frame plates are SA-516-70 CS With (418) channel plates

Stainless Steel Austenitic Air Fin Heat Exchanger - IPP# 222357

• Manufacturer: Balke Durr

fin fan overhead cooler design pressure 3.2 bar @ 135 degrees C working pressure 1 bar @ 60 degrees C fins are 54mm diameter (2) appox 46.5 m3/second type LPVT 4 ventilator fans mounted underneath 2500mm diameter

ATLAS

• Manufacturer: Atlas

Approx. 2700 Sq.Ft. Carbon Steel U tube heat Exchanger. Approx 30" dia. x 20' lgth. BEU