Used Processing in Washington, USA

2002 Westlund Engineering Inc. 200
- Manufacturer: Westlund Engineering Inc.
Pneumatic Placer - 60 cycles per minute, but 40 cycles per minute is more realistic. Pneumatic Placer – Starts with a bang and stops with a bang. The air cylinder that drives a pneumatic placer builds up pressur...
$1,650 USD
Fife, WA
Trusted Seller
VINCENT MODEL EF-30 SLUDGE PRESS S/S SN 17590-8 MANUFACTURED 2019
- Manufacturer: VINCENT
One (1) Used Vincent Mdl. EF-30 Sludge Press All S/S SN 17590-8 MFG 2019 EF-30 Sludge Press HP: 30 CAPACITY GPM: 300-1500 STAINLESS STEEL UNIT MANUFACTURED 2019 Presently installed in operation. Available due to ...
Dayton, WA
Trusted Seller
Auction
Dayton Mobile Heater
- Manufacturer: Dayton
Dayton Mobile Heater in repairable condition. Parts missing (not exactly sure everything needed to get it up and running). Inspection recommended.
Richland, WA
Visit Auction Website
Trusted Seller
HOWDEN SERIES TWIN-CA 56 STEAM TURBINE AND TD POWER SYSTEMS AC GENERATOR 7.0MW MFG 2018 - PENDING RF
- Manufacturer: Howden
- Model: TWIN-CA 56
Howden 7MW TWIN Condensing Steam Turbine with A.C. Generator MFG 2018 50 HZ / 60 HZ • OEM: Siemens Turbomachinery Equipment / TD Power systems Series SST-110 • Unit type: Twin-CA 56 • Power output: 7.0MW • Main S...
Washington, USA
Alkota CSF-20 Media Filtration System Water Treatment Reclamation
- Manufacturer: Alkota
“Used, operational. Buyer Responsible for removal and loading expenses.” Alkota CSF-20 Media Filtration System Sold in place. Used, operational. Buyer Responsible for removal and loading expenses. Gas fired press...
$2,250 USD
Ferndale, WA
Trusted Seller
ROYAL A-20-F
- Manufacturer: Royal
ROYAL A-20-F CRUCIBLE HAULER ROYAL A-20-F Crucible Hauler, 30,000 lbs Capacity, 19160 Hours
Malaga, WA
Trusted Seller
2015 ROYAL A-20 HAUL MASTER
- Manufacturer: Royal
Royal A-20 Haul Master Crucible Hauler 2015 Royal A-20 Haul Master Crucible Hauler, 30,000 lb Capacity, Cummins 6-Cylinder Diesel Engine EQUIPPED WITH: Cummins 6-Cylinder Diesel Engine
Malaga, WA
Trusted Seller
Goff 1244 Spinner Hanger
- Manufacturer: Goff
- Model: 1244
Goff Spinner Hanger Shot Blasting Machine, Year 2011, Model 3672-D, with Dust Collector (if desired). Previous owner reported that it was taken out of operation in working condition. Have cleaned out media. Seve...
Washington, USA
Trusted Seller
Trinco 36x36/PC Pressure Blast
- Manufacturer: Trinco
- Model: 36x36/PC Pressure Blast
Trinco™ Model 36x36/PC Pressure Blast Cabinet with Model 800 PT Cust Collector - 36” Wide x 36” Deep x 36” High Internal Work Area - Dual 28” Wide x 30” High Side Doors - Expanded metal grate over fine mesh stee...
Washington, USA
Trusted Seller
AHLSTROM V60U-1 FAN PUMP 11.000 GPM
- Manufacturer: AHLSTROM
104917 One (1) used Ahlstrom Model V60U-1 fan pump rated for 11.000 gpm at 515 rpm, 316 stainless steel, 19'.5" ( 28m) head, 20 1/16" (510mm) Impeller diameter.
Washington, USA
Trusted Seller
FINCKH MDL. HICO SIZE 1 PRESSURE SCREEN S/S
- Manufacturer: FINCKH
107695 One (1) used Finckh Model Hico Size 1 horizontal stainless steel pressure screen, with slotted screen basket, (N-0020084-1-001 .010 50062358 AFT Profile DUROChrome) 8" top openings, Belt driven , no motor....
Washington, USA
Trusted Seller
2007 Coperion Extruder, Model# ZSK-26
- Manufacturer: Coperion Waeschle
Coperion Extruder with Refrigeration Unit and Spare Set of Augers, Model# ZSK-26, Serial# 919603
$100,000 USD
Bellingham, WA
Trusted Seller
6,000 Gallon Tanks
Tanks would need to be cleaned prior to use. NOT FOR POTABLE WATER USE. condition: good model name / number: 6000 gallon each size / dimensions: 10 x 10 C392021-M665 .
Washington, USA
Trusted Seller
155" (3.94M) WET END SECTION CORRUGATED MEDIUM ESCHER WYSS STEP-DIFFUSER HEADBOX BLACK CLAWSON C-FORMER SS TABLE
- Manufacturer: Black Clawson
103902 One (1) used wet end section, 155" (3.9m) wide. Trim width 136" (3.4m), 1600 FPM, produced corrugated medium, consisting of Escher Wyss 155" (3.9m) step diffuser headbox (s/n x -1119), Black Clawson C-Form...
Washington, USA
Trusted Seller
115" (2.92M) VALLEY S/S PRESSURIZED HEADBOX
- Manufacturer: Valley
104013 One (1) used Valley 115" (2.92m) slice stainless steel pressurized headbox. With (2) rectifier rolls. S/N 1772R. BasisWeightRange 56-162; BC3; FlowRate 10755/11070; FPM 1550; Material SS; PaperType Fine; W...
Washington, USA
Trinco 24 BP Sandblasting & Shotblasting
- Manufacturer: Trinco
- Model: 24 BP
Good condition Trinco 24 BP Sandblasting & Shotblastings manufactured in 2025. Located in USA and other countries. Click request price for more information.
USA