Rubber Power Feeder Wheels 4-3/4"
- Manufacturer: Comatic
RO12 Rubber Power Feeder Wheels include Hub & Rubber Roller molded as 1 piece. 120x60mm, (4-3/4" x 2-5/16") 60 Durometer: Not too hard, not too soft Bore Hole Size: 35mm Bolt Holes (Center to Center): 48mm Standa...
Dundee, NY
Dundee, NY
DC Feeder Wheel Set - 4-3/4" x 1"
- Manufacturer: Comatic
Set of 2 - Use these rollers to straddle a saw blade or to create cutter clearance when running a DC30 or DC40 Feeder on a shaper. These thin power feeder wheels are used exclusively with the DC Servo Variable Sp...
Dundee, NY
Polyurethane Feed Tires - 120 x 60mm
- Manufacturer: Comatic
Replaceable Polyurethane Tires for hub and wheel systems including the RU120A
Dundee, NY
Hub & Poly. Tire System - 60x120mm
- Manufacturer: Comatic
Polyurethane Wheel System for most Co-Matic 3, 4, and 6 wheel feeders.
Dundee, NY- Trusted Seller
2013 FLOW Mach 4 4020B
- Manufacturer: Flow
- Model: MACH 4 4020B
Used Flow Model Mach 4 4020B waterjet 6' x 12' table new 2013 (Rated thickness is 10″) Equipped With: 5 Axis XD 3D Head – 3D CUTTING Cuts up to 60 Degrees with Taper Control Turned Off, 55 Degrees with Turned On ...
Valley Cottage, NY - Trusted Seller
ALMEX-SHAW TL-4-8
- Manufacturer: Almex
Max Part Size: 42″ x 96″ Temp Range: 150-350 F Max Pressure: 300PSI Equipped With Dual Tray Shuttle Feed, PLC Controller, 5HP Vacuum Pump Additional Info Machine is prepped for shipping.
Valley Cottage, NY - Trusted Seller
McElroy 420001 Pipe Fusion Machine - Bent Tabs
- Manufacturer: Mcelroy
“The tabs at the bottom of the unit are bent - please see final pictures for more details. The long lever is also slightly bent - please see final pictures for more details. Item was in working condition at the ...
$1,220 USDBergen, NY - Trusted Seller
McELROY PITBULL #14 PIPE FUSION MACHINE - USED CONDITION
- Manufacturer: Mcelroy
“Item was in working condition at the time it was removed from service. Used items have minor markings due to use. Includes everything you see pictured” McELROY PITBULL #14 PIPE FUSION MACHINE - USED CONDITION Co...
$2,500 USDBergen, NY - Trusted Seller
1250mm Mitsubishi / Hitachi 24 tons/hr Continuous Galvanizing
- Manufacturer: Hitachi
Additional Information: (Material & Line Specification) Strip thickness: 0.2~1.2mm Strip width: 650~1250mm Throughput Speed: in case of 1mm thickness: 100m/min in case of 0.5mm thickness: 150m/min (YIELD POINT OF...
Rockville Centre, NY - Trusted Seller
2018 FICEP GEMINI 36 HD,PLATE THERMAL CUTTING, DRILLING, AND MILLING,
- Manufacturer: Ficep
Specifications for stock plate to be processed (entry side) Length minimum 49-1/4" maximum 40 ft. Width minimum 31-1/2" maximum 141-3/4" Specifications of the finished part (exit side) Lengthminimum 4" Widthminim...
New City, NY 
FITZPATRICK FITZMILL MODEL DASO 6 PAN FEED FIXED BLADES BLUNT & SHARP #13811
- Manufacturer: Fitzpatrick
Fitzmill milling machine that is manufactured by Fitzpatrick, this unit is a model DASO6 and is constructed of all Stainless Steel, unit comes with a 6-inch OVERSIZED gravity feed chamber, stainless steel guardin...
Jefferson Valley, NY
DOSON - Automatic Flocculant Dosing
- Manufacturer: Emerald Modular Washing
FloccMAX DOSON is an automated system which constantly adjusts the flocculant dosage rate depending upon the quantity of silt in the slurry feed. Materials such as natural sand & gravel would typically have highe...
Salina, NY- Trusted Seller
Shearline 54"
- Manufacturer: Shear-Line
Shearline 54' roller cutter 54" wide dual powered roller anvil covered top roller operating prior to disconnect
Valley Cottage, NY - Trusted Seller
Valley Cottage, NY 
Temptek CF-3 Industrial Chiller
- Manufacturer: Temptek
- Model: CF-3
Good condition Temptek CF-3 Industrial Chillers. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
