Used Processing in New Jersey, USA

OMAS T Mix 5

• Manufacturer: Omas

Comprehensively tested, used Omas T Mix 5 approximately 5 litre stainless steel jacketed emulsifier mixer. Manufacturer: Omas. Also includes: -Top mounted central homogenizer type mixer driven by elec. motor. -Ma...

ROSS LDM2

• Manufacturer: Ross
• Model: LDM2

Used Stainless Steel Ross Planetary Mixer Manufacturer: Ross Model: LDM2

GREAVES VLS10

• Manufacturer: GREAVES

Comprehensively tested, used Greaves model VLS 10 stainless steel mixer. Manufacturer: Greaves. Also includes: -Pneumatically operated raise and lower giving approximately 190cm total height. -Stainless steel lid...

KORUMA Disho V 100/45

• Manufacturer: KORUMA

Used Approximately 12 Gallon Koruma Disho V100/45 Stainless Steel Mixer Manufacturer: Koruma Model: Disho V100/45 Mixer contains a stainless steel jacket with sanitary polished internal, top mounted agitator driv...

MOLTENI MPME700SV-TDS

• Manufacturer: MOLTENI

Used Molteni model MPME700SV-TDS stainless steel triple action vacuum mixer. Manufacturer: Molteni. Also includes: Hydraulically operated raise and lower. For details about the refurbishment work, contact a membe...

DAY 10 HP

• Manufacturer: DAY

Used Day Mixer with Cage Protection Stainless teel agitator with (3) stainless steel fixed baffles Manual operated lift mechanism Side mounted controls Driven by an approximately 10 hp motor

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221215

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by ac motor`

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221214

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by ac motor

Hastelloy - C22 Heinkel HF800 Centrifuge-Inverting Filter - IPP# 225440

• Manufacturer: Heinkel

new bearings, seals, belts, rebuilt hydraulic unit, and run in by the OEM 1600 RPM Maximum Solid Haynes Hastelloy C 22 for all process parts, 316SS for balance of exterior parts Clean in place nozzles for solids ...

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221211

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by ac Motor

IPP# 602135, Solid State Polymerization Plant Polymers - Fibres and Plastics

70 TPD PET - SSP Plant It is a facility that manufactures high-IV PET chips suitable for various bottle production by reacting low-IV PET chips produced in a melt polymerization process in a solid state to have h...

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221216

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump manufactured by Kinney/Tuthill 0.05 ultimate pressure No oil or water with process contact, and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by a...

Sterilizer - IPP# 207687

Designed for pass thru loading and unloading, with quick open doors front and back. Original Installation to a clean room 316 SS lined chamber Modified and re-rated in 1993 by Industrial Fabricating and Engineeri...

Tubular Reactor Stainless Steel 316 - IPP# 232538

• Manufacturer: Snowtech Hydro Cracker & Fisher Tropsch

Pilot plant, including an Agilent Tech Model 7890A-GC. Designed to operate at up to 725 psig and 572 degrees F in the auxiliary process vessels and 932 degrees F in the reactor tubing. The current set up includes...

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221283

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump manufactured by Kinney/Tuthill 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) 4" suction flange, 2" discharge flange. Requires 2...