Used Processing in Illinois, USA

CDS CTS6.5-13 UP CUT PROFILE 18525

• Manufacturer: CDS

One (1) used CDS model CTS 6.5-13 air traveling up-cut profile saw. S/N 051106. Unit rated to 13″ wide x 3.5″ high profiles, 6″ high x 2.5″ wide profile and 6.5″ OD pipe. 18″ diameter saw blade. 575/3/60. 3 amps....

PRODUCT DESIGN & DEVELOPMENT 2 18701

One (1) used Product Design and Development two lane profile notcher. Air actuated. 5″ x 1 ¼” cylinder. Two post design. Stand mounted.3 Available

AMERICAN MAPLAN 510 CUT OFF 18519

• Manufacturer: Maplan

One (1) used American Maplan model 510 air traveling pipe/profile saw. S/N 130099. Set up for right to left operation. Manufactured in 1992. Includes portable dust collector.Was paired with stock no. 18518 when i...

TECHNO-PLAST UP CUT TRAVELING SAW 18520

• Manufacturer: Techno-Plast

Used Techno-Plast air traveling pipe / profile saw. Nominal 18″ saw blade. Up acting cut with pneumatic hold downs

UNIPLAST PULLER / SAW 18517

Used Uniplast Puller / Traveling Saw Combination. Set up for 9 ” wide cleats, which are missing. 96″ belt contact length. Chain driven with dual pneumatic gap adjustment. Air traveling with approximate 9 ” blade....

5,000 LB CAPACITY DIGITAL FLOOR 18583

Cambridge model 660-48-48 5,000 lbs. capacity platform scale. S/N 99-7346. Calibrated last 10/05/2023. Includes digital readout head.

DIGIWEIGH 5,000 LB CAPACITY FLOOR 18555

• Manufacturer: Digiweigh

Digiweigh digital floor scale. S/N 8590211080046. Model DWP-5000F. 5,000 lbs. capacity.

PREMIER PNEUMATICS 8″ 1 HP 18068

• Manufacturer: Premier

One (1) used Premier Pneumatics model HDRFS1110-8NHRTT3 heavy duty rotary air lock. S/N 5089-1291. 8″ x 8″ entrance. Carbon steel construction. Chain and sprocket driven by a 1 HP 208-230/460-volt motor through a...

SMOOT 14″ AIRLOCK 18081

One (1) used Smoot portable rotary valve with blow through. Nominal 14” x 14” entrance with hopper and safety grate. 1 HP motor. 45 RPM maximum. With motor, starter, and cart. Very clean.

CONAIR AR10 VACUUM RECEIVER 17429

• Manufacturer: Conair

Conair model AR10 vacuum receiver, S/N 249414, 24-Volts, 2-1/4″ OD inlet, One cubic foot volume capacity, 45 degree gravity flapper outlet, #20 mesh stainless steel filter screen.

YOUNG 6INHC AIRLOCK / DIVERTER 17428

• Manufacturer: Young

Young model 6INHC 6″ airlock / diverter combination unit, .5 HP 1750 RPM motor driving 25:1 ratio gearbox on airlock for a 70 RPM speed, 6″ ID inlet with 11″ OD flanged mount, diverter with two 6″ ID outlets

CONAIR/GATTO HS-2-4 PROFILE SAW 4715

• Manufacturer: Conair

CONAIR/GATTO MODEL HS-2-4 PROFILE SAW, 2 HP 480 VOLTS 3 PHASE, 10″ HIGH SPEED STEEL BLADE, PNEUMATIC HOLD-DOWNS, TUBING CAPACITY 0 – 2 3/8″ OR UP TO PROFILES 2″ X 4″ WIDE, 10″ TABLE TRAVEL, DIMENSIONS ARE 43 3/4″...

YOUNG INDUSTRIES 6-IN 6″ AIRLOCK 14295

• Manufacturer: Young Industries

Young Industries model 6-IN airlock, S/N HG-8687, powered by a 1/2 HP 1780 RPM motor directly driving the gearbox chain sprocket steel vanes, square bolt on flange mount

TRIA TRAINO D210 FEED ROLLS 14597

• Manufacturer: Tria

Tria model Traino D210 feed rolls. S/N 33202959. Code 886.000.161, 2003 model year. 8.25″ diameter x 56″ wide knurled steel rolls powered by a 3.7 kW (5HP) 208-230V/460V 1,725 RPM motor through a gearbox. Pneumat...

PADDLE FEED ROLL 10249

Used paddle feed roll. 5″ diameter x 24″ wide 110V/1ph/60Hz 1/4HP motor air clutch chain and sprocket drive no controller.

APM SBP-SS-10 Packaging Machinery

• Manufacturer: APM
• Model: SBP-SS-10

Good condition APM SBP-SS-10 Packaging Machinery. Located in USA and other countries. Click request price for more information.