Used Granulators & Pelletizers

BALL & JEWEL CGMB2045 GRANULATOR 18778

• Manufacturer: Ball & Jewell

Ball & Jewel model CGMB2045 granulator (Nelmor G2045MB). S/N 05L06403. 20″ x 45″ feed throat. Tangential cutting chamber. 3 knife open rotor with 2 bed knives. Insulated conveyor feed hopper and body panels. 8″ O...

CUMBERLAND 484 GRANULATOR WITH FEED 18635

• Manufacturer: Cumberland

Cumberland model 484 granulator. S/N 421000-92513. 14″ x 16″ feed throat. 3 knife slant cut rotor, 2 bed knife. 15 HP 460-volt motor. Front feed roll in-feed only. Polynetics 15″ wide steel grooved feed rolls are...

CUMBERLAND S-200 SCREENLESS GRANULATOR 17800

• Manufacturer: Cumberland

Cumberland model S-200 screen less granulator, S/N 00862, 11″ x 11″ cutting chamber, two “S” cutters, 2 HP 230-volt 1740 RPM motor – wired 240-volts, robot / top hand feed hopper, gravity discharge, on casters, c...

NELMOR G1012LS LOW SPEED GRANULATOR 16141

• Manufacturer: Nelmor

Nelmor model G1012LS low speed granulator. S/N 9206-31452. 10″ x 12″ feed throat, 5 knife solid rotor, 2 bed knife. 5HP 230/460V motor through a gearbox. Chain and sprocket driven rotor. Double wall top robot / h...

NELMOR G1012LS LOW SPEED GRANULATOR 16580

• Manufacturer: Nelmor

Nelmor model G1012LS low speed granulator. S/N 8710-26404. 10″ x 12″ feed throat. 5 knife solid rotor, 2 bed knife. 3HP 230/460V. SEW-Eurodrive motor and gearbox. Chain and sprocket driven rotor. Insulated top ro...

NELMOR G1215P1 GRANULATOR WITH FEED 16280

• Manufacturer: Nelmor

Nelmor model G1215P1 granulator. S/N 99K03325. 12″ x 15″ feed throat, 3 knife open rotor, 2 bed knife 15HP 208-230/460V 1,480 RPM motor. Double wall rear top hand feed with front mounted knurled steel feed rolls,...

NELMOR G810LS LOW SPEED GRANULATOR 16117

• Manufacturer: Nelmor

Nelmor model G810LS, low speed granulator, S/N 8904-28845. 8″ x 10″ feed throat, chain and sprocket driven 3 knife solid rotor, hard faced cutting chamber, 1HP 230/460V motor with a gearbox. Insulated top robot/h...

CUMBERLAND 1420 GRANULATOR FOR AIR 14752

• Manufacturer: Cumberland

Cumberland model 1420 granulator for air table. 3 knife rotor, 2 bed knife. Evacuated by a 7075FD blower with 7″ OD inlet and 6″ OD outlet. Insulated in-feed box, all mounted on a unitized caster frame base.

PALLMAN PS6-6 RUBBER GRANULATOR 17877

• Manufacturer: Pallmann

Pallman “Ultra-Granulator model PS6-6, S/N 184.90.022, 22″ x 24.5″ feed throat (560mm x 630mm), 3 knife guillotine style rotor, 2 bed knife, 115 HP (86 Kw) 1780 RPM 440-volt motor with a 140 maximum amp load, rat...

MA INDUSTRIES 061995-A209 GRANULATOR 14638

MA Industries model 061995-A209 granulator. S/N N-737-1045. 18″ x 37″ feed throat, 3 knife high shear rotor, 2 bed knife. 100HP 460V motor, tray feed hopper, 10″ bolt flanged airveyor discharge mounted on a 40″ d...

BALL & JEWEL BP22 GRANULATOR 17268

• Manufacturer: Ball & Jewell

Ball & Jewel model BP22 granulator, S/N 9505-36802 10″ x 12″ feed throat, 3 knife open rotor 2 bed knife, 7.5 HP 230/460 volt motor single wall tray feed hopper bin discharge on casters complete with starter and ...

CONAIR / WORTEX CK1018 GRANULATOR 14280

• Manufacturer: Conair

Conair / Wortex model CK1018 granulator. S/N 300.1141. 10″ x 18″ feed throat, 3 knife open rotor, 2 bed knife. 10HP 460V motor. Insulated tray feed hopper and body panels. 2″ left hand vacuum take off discharge. ...

REBUILT CONAIR CE1221 GRANULATOR 18236

• Manufacturer: Conair

Conair model CE1221 granulator (Rapid 600C). S/N 50.2732. 12″ x 24″ feed throat. 8 knife staggered rotor, 3 bed knives. 50 HP 460-volt motor. Tray feed hopper with pneumatic assist tilt back. Gravity discharge. V...

Salmatec Maxima 580 Granulators & Pelletizer

• Manufacturer: Salmatec
• Model: Maxima 580

Good condition Salmatec Maxima 580 Granulators & Pelletizers. Located in Netherlands and other countries. Click request price for more information.