Used Shearing Equipment in Overijssel, Netherlands

Plate shears / Guillotine shears KMS PLSH 15606 (1560×6 mm)

• Manufacturer: KMS

Mechanical plate shears for cutting steel, stainless steel, aluminum, plastic, etc. Shown machine is equipped with: Digitally adjustable back gauge up to 1000 mm (750 mm is standard) Pneumatic high holding system...

Plate shears / Guillotine shears EBR GMRH-RF 1403 (1360×3 mm)

• Manufacturer: EBR Metal

Mechanical plate shears for cutting steel, stainless steel, aluminum, plastic, etc. Shown machine is equipped with: Digitally adjustable back gauge up to 750 mm Pneumatic high holding system for supporting long s...

Plate shears / Guillotine shears | KMS PLSFR 13203 | Capacity 1360×3 mm | Front output

• Manufacturer: KMS

New plate shears with output cut plate (up to ± 300 mm) at front of machine. Equipped with: Plate output front or rear Backgauge 750 mm Brake motor Hook guide with ruler Foot pedal Front upper arms Run-in protect...

Plate shears / Guillotine shears | KMS PLS 13603 | Capacity 1360×3 mm | Hand-operated back gauge

New plate shears of Turkish manufacture. Equipped with Hand-operated back gauge of 750 mm. Brake motor Hook guide with ruler Foot pedal Front upper grips Run-in protection at rear Production number counter Cuttin...

Plate shears / Guillotine shears | KMS PLS 256025 | Capacity 2560×2.5 mm | NC operated back gauge

• Manufacturer: KMS

Mechanical plate shears. Delivered to a customer who will use it mainly to cut aluminum up to 3 mm. Equipped with: Digitally adjustable and readable back gauge up to 1000 mm. Pneumatic plate support that prevents...

Plate shears / Guillotine shears | KMS PLS 13603 | Capacity 1360×3 mm | NC operated back gauge

New Plate Shears of Turkish manufacture. Standard equipped with: Brake motor Hook guide with ruler Foot pedal Front upper grips Walk-in protection at rear Production number counter Available with various options:...

Impact shears KMS SGM-H 1020

• Manufacturer: KMS

New Turkish-made impact shears. Capacity: 1050 x 1.5mm (Steel St-37) | Soort: Sheet metal shear | Range of back gauge: 0 - 600 mm | Machine dimensions: 1920 x 1040 x 1350mm | Machine weight: 350 kg

Plate shears Bronswerk BFS 1220×2 mm

• Manufacturer: Bronswerk

Used sheet metal shears. Older machine but still working well. Incl. foot pedal and adjustable back gauge (manual).

Jörg 4003 ER sheet metal shear | 1250x2 mm.

• Manufacturer: Jörg

The Jörg 4003 ER sheet metal shear is a reliable machine for sheet metal working. This model can cut steel sheets up to 1250 mm wide and 2 mm thick. The machine is easy to operate, which contributes to efficienc...

HACO HSL 3016 PLATE SHEAR

• Manufacturer: Haco - Atlantic
• Model: HSL

AVAILABLE END OF SEPTEMBER. Delivery and installation at your location are certainly possible; delivery and additional costs are negotiable. We have been the Dutch dealer for HACO press brakes and shears since 20...

1991 HACO TS 3006

• Manufacturer: Haco - Atlantic
• Model: TS 3006

AVAILABLE FROM WEEK 40 Total width: Weight approx. 4500 kg

2008 HACO HSLX 3006 IN VERY GOOD CONDITION WITH PLATE HOLDING SYSTEM

• Manufacturer: Haco - Atlantic
• Model: HSLX

HACO HSLX 3006 IN VERY GOOD CONDITION WITH PLATE HOLDING SYSTEM AVAILABLE IN WEEK 44 2025 Weight approx 5500kg

2001 HACO TSX 3006 COMPLETELY OVERHAULED IN EXCELLENT CONDITION

• Manufacturer: Haco - Atlantic
• Model: TSX

HACO TSX 3006 AVAILABLE IN APRIL 2025 Weight approx. 4500kg