Used Shearing Equipment in Overijssel, Netherlands

Plate shears / Guillotine shears KMS PLSH 15606 (1560×6 mm)

• Manufacturer: KMS

Mechanical plate shears for cutting steel, stainless steel, aluminum, plastic, etc. Shown machine is equipped with: Digitally adjustable back gauge up to 1000 mm (750 mm is standard) Pneumatic high holding system...

Plate shears / Guillotine shears EBR GMRH-RF 1403 (1360×3 mm)

• Manufacturer: EBR Metal

Mechanical plate shears for cutting steel, stainless steel, aluminum, plastic, etc. Shown machine is equipped with: Digitally adjustable back gauge up to 750 mm Pneumatic high holding system for supporting long s...

Plate shears / Guillotine shears | KMS PLSFR 13203 | Capacity 1360×3 mm | Front output

• Manufacturer: KMS

New plate shears with output cut plate (up to ± 300 mm) at front of machine. Equipped with: Plate output front or rear Backgauge 750 mm Brake motor Hook guide with ruler Foot pedal Front upper arms Run-in protect...

Plate shears / Guillotine shears | KMS PLS 13603 | Capacity 1360×3 mm | Hand-operated back gauge

New plate shears of Turkish manufacture. Equipped with Hand-operated back gauge of 750 mm. Brake motor Hook guide with ruler Foot pedal Front upper grips Run-in protection at rear Production number counter Cuttin...

Plate shears / Guillotine shears | KMS PLS 256025 | Capacity 2560×2.5 mm | NC operated back gauge

• Manufacturer: KMS

Mechanical plate shears. Delivered to a customer who will use it mainly to cut aluminum up to 3 mm. Equipped with: Digitally adjustable and readable back gauge up to 1000 mm. Pneumatic plate support that prevents...

Plate shears / Guillotine shears | KMS PLS 13603 | Capacity 1360×3 mm | NC operated back gauge

New Plate Shears of Turkish manufacture. Standard equipped with: Brake motor Hook guide with ruler Foot pedal Front upper grips Walk-in protection at rear Production number counter Available with various options:...

Impact shears KMS SGM-H 1020

• Manufacturer: KMS

New Turkish-made impact shears. Capacity: 1050 x 1.5mm (Steel St-37) | Soort: Sheet metal shear | Range of back gauge: 0 - 600 mm | Machine dimensions: 1920 x 1040 x 1350mm | Machine weight: 350 kg

Plate shears Bronswerk BFS 1220×2 mm

• Manufacturer: Bronswerk

Used sheet metal shears. Older machine but still working well. Incl. foot pedal and adjustable back gauge (manual).

Jörg 4003 ER sheet metal shear | 1250x2 mm.

• Manufacturer: Jörg

The Jörg 4003 ER sheet metal shear is a reliable machine for sheet metal working. This model can cut steel sheets up to 1250 mm wide and 2 mm thick. The machine is easy to operate, which contributes to efficienc...

HACO HSL 3016 PLATE SHEAR

• Manufacturer: Haco - Atlantic
• Model: HSL

AVAILABLE END OF SEPTEMBER. Delivery and installation at your location are certainly possible; delivery and additional costs are negotiable. We have been the Dutch dealer for HACO press brakes and shears since 20...

2008 HACO HSLX 3006 IN VERY GOOD CONDITION WITH PLATE HOLDING SYSTEM

• Manufacturer: Haco - Atlantic
• Model: HSLX

HACO HSLX 3006 IN VERY GOOD CONDITION WITH PLATE HOLDING SYSTEM AVAILABLE IN WEEK 44 2025 Weight approx 5500kg

2001 HACO TSX 3006 COMPLETELY OVERHAULED IN EXCELLENT CONDITION

• Manufacturer: Haco - Atlantic
• Model: TSX

HACO TSX 3006 AVAILABLE IN APRIL 2025 Weight approx. 4500kg

1991 HACO ATS 3006 ATLANTIC

• Manufacturer: Haco - Atlantic
• Model: ATS 3006

MACHINE IS IMMEDIATELY AVAILABLE Weight approx. 5500kg