Used Machine Tools in Illinois, USA

Flex Shaft Polisher Stands

Flex Shaft Polisher Stands

Carbide Thread Mills

Carbide Thread Mills

2014 HELMEL MICROGAGE 128-801

• Manufacturer: HELMEL

2014 Helmel Microgage 128-801 CMM, a reliable coordinate measuring machine with an 8" x, 12" y, and 8" z range. Ideal for precision measurements, this used model balances quality and performance for your industri...

2014 Aim Accuthread ATH12E

• Manufacturer: Aim Accuthread

Wire Range- .157 to .472 (4mm to 12mm) Spindle RPM 3000 44″x52″x60″ 2400lbs

2013 Bolton BT6132A

• Manufacturer: Bolton

Machine type: CNC Lathes | Machine location: Missouri | Stock #: 423603 | Chuck size: 6″ | Bar capacity: 1.5″ | # axis: 2 | Max rpm: 2,500 RPM | Swing: 12.562″ | Machining length: 29.5″ | Control: CNC (GSK 980TD)

1964 Cincinnati LRT

• Manufacturer: Cincinnati

Equipped With: 15″ 3-Jaw Chuck Tailstock Machine type: Engine Lathes | Machine location: Louisiana | Stock #: 612381 | Swing over bed: 24″ | Swing over carriage: 15″ | Bed length: 120″ | Through hole: 2.375″ | Ch...

2010 Nagel TF4-20

• Manufacturer: Nagel
• Model: TF4-20

Machine type: CNC | Machine location: Michigan | Stock #: 561469 | Maximum camshaft length: 54 inches | Lapping arms: 6 | Lobe arms: 4 | Main bearing arms: 2 | Lapping arm slide carriage travel: 54 inches

2000 Tormach Personal CNC 770

• Manufacturer: Tormach

Equipped with: Tormach Personal CNC 770 Controller

2013 SWISTEK AS20T

• Manufacturer: SWISTEK

SWISTEK AS20T 2013 Swiss Type Automatic Screw Machine available. Features a 20 mm spindle hole, 7 axes, Mitsubishi M70 control, Iemca Ideal 325 bar feeder, parts and chip conveyors, and a 3-stage tower light. Per...

2000 Supermax Y0M - FV56A

• Manufacturer: Supermax

Equipped With: Fanuc 18-M Cnc Control Spindle Chiller Coolant Tank

2001 Akira Seiki V-2A

• Manufacturer: Akira-Seiki

Equipped With: Rigid Tap 24+1 ATC 8k Spindle Machine type: Vertical Machining Centers | Machine location: California | Stock #: 952059 | X axis: 21.7″ | Y axis: 17.0″ | Z axis: 20.0″ | Spindle motor: 20 HP | Maxi...

1996 Trak DPM

• Manufacturer: TRAK
• Model: DPM

Machine type: CNC/Manual Knee Mills | Machine location: Massachusetts | Stock #: 301657 | X axis: 31″ | Y axis: 17″ | Z axis: 21.5″ | Table size: 10″ × 50″ | Spindle motor power: 3 HP | Maximum spindle speed: 4,...

2018 Shop Sabre Pro 404

• Manufacturer: Shop Sabre

Equipped With: Dust Collector Multi-Zone Vacuum System Material Height Touch Pad Pop-Up Reference Pins

2020 Laguna iQ

• Manufacturer: Laguna
• Model: IQ

Machine type: Routers | Machine location: Florida | Stock #: 611101 | Spindle: 3HP Industrial Induction Spindle, Liquid Cooled | Spindle rpm: 6,000 – 24,000 RPM | Controller: Laguna Hand-held controller | Ball s...

Finishing Stones

Finishing Stones