Used threading in Ontario, Canada

1973 PELTZER & EHLERS NKW-K-24

• Manufacturer: Peltzer & Ehlers
• Threading length: 125 millimeter

Equipped With * Elevator Hopper Largest bolt dia. at 550n/mm?: M 27 ( 1" ) | Largest bolt dia. at 800n/mm?: M 24 ( 7/8" ) | Max. thread length: 125mm ( 5" ) | Shank length: 35 - 200 mm ( 1 3/8 - 8" ) | Output: up...

GOVAMA Model GPM-50

• Manufacturer: GOVAMA
• Threading length: 200 millimeter

Equipped With Specifications: Performance (Cylcle time for 1200mm total lgth): Features: The GPM series models offer single or double ended thread rolling, from diameters of 6-33mm (1/4"-1-1/4") either via the st...

2009 SOMSAN M12 SINGLE SPINDLE ROUND NUT TAPPING MACHINE

Equipped With FEATURES: Vibratory Feeder Hydraulic Clamping for Round nut tapping

1989 NUTAP MAS-08NV

• Manufacturer: Nutap

Maximum thread diameter: 8 millimeters | Minimum thread diameter: 4 millimeters | Biggest flange or max. outside dia.: 15 millimeters | Production rate: 15000 - 21000 Pcs/Hr

MACHINE PRODUCTS BM

• Manufacturer: MACHINE PRODUCTS

Equipped With These machines are for the manufacture of long screws & bolts, fully automatic from wire coil to finished product. A single machine, consisting of harmonized components, can perform the following op...

WAFIOS UNT20 (3/4")

• Manufacturer: Wafios

Equipped With Features: * Tapping, Boring & Counter-boring of Special Nuts * Specially Suited to Thread Blind Borings & Extremely Long Parts * PLC Control & Process Tap Monitoring * Full Electronically Control of...

WAFIOS Model MAS-14F (14mm)

• Manufacturer: Wafios

Equipped With Features: * Tapping Precision Thread of Hex, Square, Flange, Round, 12 Point, Wheel & Special Nuts * Pitch Cam Feed Control * PLC Control & Process Tap Monitoring * Variable Speed DriveØ Very Low T....

PRUTTON 125B-HV

• Manufacturer: Prutton
• Model: 125B-HV
• Threading length: 76.19999999999999 millimeter

Equipped With * Twin Ferris Wheel Feeder Drums Max. diameter: 1/4" | Max. thread length: 3" | Underhead blank length: 3" | Speed: 600-800 ppm (up to 1800ppm w/air jet feed) | Hopper capacity: 120 lbs

1975 National 6L4

• Manufacturer: National
• Model: 6L4
• Threading length: 44,449.99999999999 millimeter

Maximum cutoff diameter: .375 inches | Number of dies: 4 | Maximum cutoff length: 4.5 inches | Maximum kickout length: 3.125 inches | Minimum kickout length: .750 inches | Minimum cutoff length: .875 inches | Ma...

REED A23

• Manufacturer: Reed
• Model: A23

Equipped With Min. - Max. Threading Diameter (In-feed): 1/4" - 3-3/4" Min. - Max. Thread Diameter (Thru-feed): 1/4" - 1" Maximum Thread Length (In-feed): 2-3/8" Maximum Thread Length (Thru-feed): 11"

3/4″ National 4DIE BOLTMAKER

• Manufacturer: National
• Model: 3-4
• Threading length: 78 millimeter

Equipped With Max cutoff diameter: 22 mm (.866") | Min/max kickout: 30 - 160 mm (1.181" - 6" | Min/max cutoff length: 38 - 200 mm (1.496" - 7.874") | Max thread length: 78 mm (3") | Max output: 90 PPM | Heading l...

National 10L4

• Manufacturer: National
• Model: 10L4

Equipped With * IFO Transfer Location: Number of dies: 4 | Number of stations: 5 | Maximum wire diameter: 5/8" | Maximum length underhead: 4-3/8" | Min. length underhead: 1-1/8" | Max. cutoff length: 5-3/4" | Min...

2013 TESKER 230

• Manufacturer: TESKER

Equipped With Max. Threading Diameter Up To 2-1/2" * Spindle Speeds VARIABLE * Complete with Hydraulic Pump and Tank

2021 GOVAMA HK25

• Manufacturer: GOVAMA

Equipped With Min. Threading Diameter (In-feed): 3 0.118) Max. Threading Diameter (In-feed): 48mm (1.889”) Maximum Thread Length (In-feed): 170mm (6.692") * Heavy duty 3”dia spindles * 7” Rexroth PLC control scre...

VIDEX

• Manufacturer: Videx

Equipped With * Fully Automatic Specialty Bolt Machines >> Single / Double End? U-Bolts, Eye Bolts, Anchor Bolts, Threaded Studs, Chamfered Parts and more * High Speed Planetary Thread Rollers * High Speed Nail R...