Used Industrial Furnaces & Ovens in Opole, Poland

Furnace, sawdust boiler with a stoker

Furnace with heating power of 600 KW Low-temperature furnace, automatic system for burning biomass Type INNOVEX - BOREX - AT Date of production 2006 Technical and operation documentation Nolting scraper The whole...

Urbas 1.5 MW furnace

A 1.5 MW furnace. The furnace is fueled by biomass, bark, wood chips, and sawdust. Built in 2000. The boiler is equipped with a VERTICAL HEAT EXCHANGER, which significantly simplifies cleaning, as all ash falls ...

Urbas 4 MW furnace

Furnace with heating capacity of 4 MW Furnaces for biomass, bark, woodchip, sawdust. Moisture content of the material up to 60% Furnace available from July-August 2025

Furnace, blowing and extraction fans

Fans of various parameters, in working order.

Froling 500 KW 25 furnace

500 kW stove TURBO MAT 500 TYPE Storage for biomass, bark, sawdust, and wood chips (G 30 – G 50) Year 2007 Moving grates 8.5 m long, 200 mm diameter fuel screw feeder Fully automatic ash removal and heat exchange...

Viessmann 720 KW oil furnace

Capacity 720 KW Year 1995

Emergency cooler for 3.5 MW furnace

Total of 8 fans, under them high-efficiency coolers Two segments, one segment will cool 1500 KW

Furnace for drying sawdust and wood chips

Expansion vessel for 3000 l furnace

Diameter 140 cm Total height 260 cm Capacity 3000 l Year 1994

WEN 108 air and smoke furnace fan

Inlet 70 x 100 cm Outlet 70 cm Motor 22 kW

A cell with a screw feeder for feeding fuel to the furnace

Inlet 19 x 10.50 cm Length of auger 3 m Diameter of auger 120 mm Motor driving the auger 025 KW, 1340 rpm Cell motor 0.37/0.42 KW. 1390/1665 rpm

Ash conveyor, waste removal from the Ż 35 furnace

Length 2.90 m, total 3.50 m Screw diameter 190 mm Outer diameter 210 mm Motor with geared motor 0.75 kW

Ash conveyor, waste removal from the Ż 34 furnace

Length: 4.50 m Screw diameter: 180 mm Outer diameter: 210 mm Motor with geared motor: 1.1 kW

Expansion vessel for furnace, buffer, capacity 1000 l

Capacity 1000 l Pressure min/max 0/4 bar Temperature up to 100 degrees Year 2010 - height 220 cm -diameter 90 cm

Froling 200 KW biomass stove – new lining

Furnace with a heating capacity of 200 kW TYPE Lambdamat FWT 200 Year 1996 Fueled by biomass, bark, wood chips, and sawdust. New lining!!!