- Trusted Seller
2009 RMH RMH VR18 mengwagen
- Manufacturer: RMH
RMH VR18 built in 2009 RMH VR18 built in 2009 front and rear unloading belt fitted with stainless steel car is working
Bladel, Netherlands - Trusted Seller
$2,933 USDVeghel, Netherlands - Trusted Seller
2025 RMH Trio 45
- Manufacturer: RMH
- Tire size: 4 tires 455/55R22.5
- Capacity: 45 m³
Three vertical augers with overlapping system Blades on augers made of high-quality steel Eleven blades per auger Three heavy-duty planetary gear reducers Two mixing speeds, mechanically controlled Four mechanica...
Stegeren, Netherlands
2015 RMH Premium 21
- Manufacturer: RMH
- Model: Premium 21
- Horsepower: 175 hp
- Capacity: 21 m³
Deutz TCD2012 4 cyl. 175 hp Heated mirrors Unloading door on the left front, additional unloading door on the left rear Stainless steel in the mixing bowl, approx. 1 meter high Stainless steel on the outer segmen...
Stegeren, Netherlands
2013 RMH Megamix 18
- Manufacturer: RMH
- Model: Megamix 18
- Capacity: 18 m³
Deutz TCD 2012, 6-cylinder, 208 HP Stainless steel in the mixing bucket, approximately 1 m high Four hydraulic counterblades Automatic lubrication system Heated exterior mirrors Single discharge door in the cente...
Stegeren, Netherlands
2025 RMH Mixell 24
- Manufacturer: RMH
- Model: Mixell
- Capacity: 24 m³
- Discharge system: Discharge Doors/Chutes
Chutes under the discharge doors Two vertical mixing augers with overlapping system Heavy-duty planetary gear reducers Two mixing speeds, mechanically controlled High-quality steel auger blades 10 blades per auge...
Stegeren, Netherlands
2013 RMH Mixellent 22
- Manufacturer: RMH
- Model: Mixellent
- Capacity: 22 m³
Two vertical mixing augers with overlapping system Spiral mill (200cm wide) with rubber infeed belt (650mm wide) Stainless steel infeed tunnel (1m high) Stainless steel in mixing hopper, approx. 1m high = lifetim...
Stegeren, Netherlands
2014 RMH Mixellent 24
- Manufacturer: RMH
- Model: Mixellent
- Capacity: 24 m³
Deutz TCD 2012, 6 cyl, 208 hp. Stainless steel in the mixing bucket, about 1 meter high Stainless steel on outer segment of augers Stainless steel in milling housing Heavy duty front and rear axle (Carraro) with ...
Stegeren, Netherlands
2006 RMH VSL 16
- Manufacturer: RMH
- Model: VSL 16
- Horsepower: 208 hp
- no. of knives: 3 pcs
Deutz BF 6M 2012 C, 6 cyl, 200 HP Stainless steel in the mixing bucket, ca. 1 meter high 3 hydraulic counter knives Heated exterior mirrors Unloading door left and right front Unloading chain left and right front...
Stegeren, Netherlands
2014 RMH Premium 21
- Manufacturer: RMH
- Model: Premium 21
- Horsepower: 175 hp
- Capacity: 21 m³
Deutz TCD 2013, 4-cylinder, 175 hp. Stainless steel in the mixing bowl, approx. 1 meter high Stainless steel on the outer segment of the augers, approx. 10 cm 2 hydraulic counter knives Heated exterior mirrors Au...
Stegeren, Netherlands
1999 RMH US 18
- Manufacturer: RMH
- Capacity: 18 m³
Deutz, 6 cyl, air cooled 4 hydraulic counter knives 1 unloading door in the middle front Loose chain with stainless steel bottom at the front, releasing left and right Rear wheel drive Front wheel steering Simple...
Stegeren, Netherlands
2025 RMH Liberty 15
- Manufacturer: RMH
- Model: Liberty
- Capacity: 15 m³
DEMO Deutz Turbo diesel engine, 135 HP, TIER5 Left and right front discharge door Gutters under discharge door Stainless steel in the mixing bucket, approximately 1 m high Stainless steel in the cultivator arm St...
Stegeren, Netherlands
2014 RMH Mixell 22
- Manufacturer: RMH
- Model: Mixell 22
- Capacity: 22 m³
- Discharge system: Discharge Doors/Chutes
Electric control Delay box 2nd weighing box rear outside edge stainless steel including license plate Available immediately
Stegeren, Netherlands
2013 RMH Premium 21
- Manufacturer: RMH
- Model: Premium 21
- Horsepower: 175 hp
- Capacity: 21 m³
Deutz TCD 2013, 4-cylinder, 175 HP Stainless steel in the mixing bucket, approx. 1 meter high = lifetime warranty! Stainless steel on the outer segments of the augers Two hydraulic counterblades Heated exterior m...
Stegeren, Netherlands
RMH Mixell Feeder & Mixer Wagon
- Manufacturer: RMH
- Model: Mixell
Good condition RMH Mixell Feeder & Mixer Wagons available between 2008 and 2017 years. Located in Netherlands and other countries. Click request price for more information.
Netherlands
Tip: Enter manufacturer, model or keyword