Used Processing in Alberta, Canada

NRG 496 – Flarestack – 4″ and 6″ x 60′
Can be used as a 4" Flare Stack or as a 6" Flare Stack - both line available. Multiple Units Available Tandem Axle Trailer Hydraulic Lift Pilot System Pipe Racks Lots of room for storage Outriggers Reconditioning...
Halkirk, Canada
2003 NRG 551 – Meter Skid – 600 ANSI
2" Meter Skid C/W Pump and 2200 Liters Tank Capacity
Halkirk, Canada
Trusted Seller
2000 400 hp Teco Westinghouse AEHA-TK008 Sullair PDR25 PROCESS Compressor
- Manufacturer: Teco - Westinghouse
Service type: Sweet | Pasc condition rating: C | Condition details: Heavy Used &/or Significant Repair | Mawp: 200 | Vru application: No | Compressor make: Sullair | Compressor model: AEHA-TK008 | Driver mak...
Calgary, Canada
NRG 343 – 6′ x 20′ 75psi Side Controls Treater
Calgary, Canada
Trusted Seller
1995 Amercool Manufacturing Inc. 1 F14-090-1 Forced Draft Process Cooler
Section A: 1.00MMBTU/H DP: Atmospheric Surface Per Unit-Finned Tube: 10,410 Ft.² Tubes: 198 x 1″ OD x 14′ Long Tube Material: SA-214 Inlet / Outlet: 6″ 600# RF Section B: 0.127MMBTU/H DP: Atmospheric Surface Per ...
Beiseker, Canada
1998 NRG 248 – Flare Knock Out Drum- 50 BBL
50 BBL Flare Knock Out Drum Non-Code Atmospheric / 8 inch in and out Vessel is not attached to saddle, sits in saddle for transport. Never used, surplus.
Calgary, Canada
NRG 311 – Flarestack – 4″ x 20′
C/W Pipe racks & line pipe Winch operated Split design
Ponoka, Canada
NRG 670 – Flarestack – 4″ x 100′
Size: 4"x100' | Service: Sweet / Sour
Ponoka, Canada
10’ x 40’ 75psi NRGMAX Treater
10’ x 40’ 75psi NRGMAX Treater New Vessel, built in 2021 Fully Flanged, RT-1 (2) 2.5 MM BTU Firetubes Profire 2100, CSA B149.3 Compliant 5-6 Weeks to Package CES 851 Stock Vessel NRGMAX Packed Treaters. The most ...
Calgary, Canada
MOISTURE SEPARATORS
Ideal for portable abrasive blasters. Maintenance free baffle type separator. High volume and maintenance free. 150 PSI rated vessel with internally mounted stainless steel de-mister pads, available as single or ...
Edmonton, Canada
Trusted Seller
2009 Amine Reboiler (BKU)
- Manufacturer: Exchanger Industries
Tema Type: BKU 26MMBtu/h Heat Surface Area: 3681.6 Ft.² Size: 40/57-273 Shell: 50 PSI @ 300° F Tube: 333 PSI @ 400° F Head Material: SA-240-316L Stainless Steel Tube Material: SA-789-UNS31803 Duplex Stainless Ste...
Beiseker, Canada
Trusted Seller
2020 Axial Flow Impellers - Three-Bladed Propeller
- Manufacturer: Ekato Corp.
For Industrial Propeller Agitators - Application spec included in photos. Shaft - Alloy C-22Impellers - Cast Alloy 59Other Wetted Parts - Alloy C-22 (Alternative material C-276)Mounting Flange Face - 150# RF CS/A...
Fort McMurray, Canada
Trusted Seller
2015 2,803 BPD Debutanizer Package (NEW - Never Used)
- Manufacturer: Propak Systems Ltd
This de-butanizer package is required to produce high value condensate. The package will separate and send any incoming gas off to the compressors, preheat the inlet stream with the tower bottoms high value conde...
Drayton Valley, Canada
Trusted Seller
2005 203 hp CAT 3306 Frick TDSH193S Screw Compressor
- Manufacturer: Caterpillar
Service type: Sweet | Pasc condition rating: C | Skidded: Yes | Housed: Yes | Connection status: Disconnected | Packager: Toromont Process Systems | Mawp: 450 | Compressor type: Screw | Compressor make: Frick | ...
Yellowhead County, AB T0E, Canada
Trusted Seller
Alfa Laval 418 Centrifuge
- Manufacturer: Alfa-Laval
www.VIDAEQ.com 🔥 Alfa Laval 418 Decanter Centrifuge This Alfa Laval centrifuge package is in good condition. This machine is being sold as-is. 👉 Viewing this on Machinio? Then follow this link to view the full...
$30,000 USD
Nisku, Canada