Used Tanks & Kettles in Ontario, Canada

DCI Inc.

• Manufacturer: DCI

This suspension manufacturing vessel is 316L stainless steel. It's 20" diameter x 13" deep (40 litre capacity). It was built to have a Silverson high shear mixer attached but the mixer was never supplied to the m...

1400 Gallon Steel Vessels

Steel Non-Lined On Stands Size: 1400 Gallon Approx. | Diameter: 72in | Height: 72in

Water Nozzle

• Manufacturer: Seal-Rite

Water Nozzle for water tank assembly. Blow gun body is designed to comfortably fit the contour of the hand, minimizing user fatigue. Large lever with vinyl grip further adds to the ergonomic design and allows fo...

Cherry Burrell UAMS-250R

• Manufacturer: Cherry Burrell

This is an insulated 2 compartment tank with a mixer in each tank. Each tank has a hinged 1 piece lid that has a 1.5" diameter inlet and a 14.5" diameter manway with a lid. Each tank is 25.25" wide x 35.75" long ...

L'Hoir Inc. Manufacturers

• Manufacturer: L'Hoir Inc. Manufacturers

Single wall closed top, dished bottom tank. It has a 12" diameter inlet / manway with a 1 piece lid. The tank is 36" diameter x 30" deep overall (22.5" sidewall), approximately 100 gallons. There is a bottom 2" d...

Inox Industries

• Manufacturer: Inox Industries

This all stainless steel pressure tank is has a domed top with 4 - 2" outside diameter sani clamp connections. There is also a 6.5" and 7" outside diameter sani clamp connection inlets. the 6.5" has a sani clamp ...

Apache Stainless Equip. Corp. TK T4

• Manufacturer: Apache

This reactor has a cone bottom and sits on load cells. It's approximately 100 gallons. The tank is 32" diameter x 41" deep overall (28" sidewall (24" jacket) & 13" cone). The jacket runs along the side and bottom...

WHE Bio-Systems

• Manufacturer: WHE Bio-Systems

Stainless steel insulated pressure tank with a Lightnin mixer. The tank has a dish top with a 17" manway (certified by Paul Meuller). The manway has a 4.75" outside diameter sani clamp connection inlet. The tank ...

Toronto Coppersmithing

• Manufacturer: Toronto Coppersmithing

Stainless steel tank with mild steel painted legs and cross peices underneath. The tank is 50.25" diameter x 60" deep (approximately 2000 litre, 525 gallon). It has a flat bottom that slopes to the bottom side ou...

Muller Vispro 626808

• Manufacturer: Muller

100 litre capacity stainless steel discharge system for viscous products. Drum is smooth-walled 450 mm. diameter with torispherical bottom. 316L stainless steel, #4 polish and all welds ground smooth with Sanitar...

1/2″ x 1/4″ Push-In Tubing Fitting

• Manufacturer: Seal-Rite

1/2″ x 1/4″ Push-In Tubing Fitting – Temperature safe up to 200°F, not for use with drinking water. Temperature Range – (°F)- 40 to + 200 Tube O.D. Size – 1/4 inch Male Pipe, 1/2 inch Tube O.D. Note: These prod...

Wilden 1/4″ 5 gpm Air-Operated, Dual-Diaphragm Pump Rebuild Kit

• Manufacturer: Wilden

5 gpm 1/4″ Wilden Air-Operated, Dual-Diaphragm Pump Rebuild Kit (Note: Rebuilding this pump may, or may not alleviate any problems – this item is non-returnable.) Kit includes two tee sections, four o-rings, 4 ba...