Used Processing in Pomeranian, Poland

Conveyor belt conveyor feeder

Straight conveyor belt is a device used to transport products through a section of a production line. Our belt conveyor is designed for light works. Application: machine industry, chemical industry, furniture ind...

GROSS GAZ 63 chipper, WEIMA for chipping under pellets, briquettes, 23 new knives

• Manufacturer: Gross

- after technical inspection - very good condition - ideal for disc, paper, film, etc. - put on new knives The advantages of the chipper are: - Unification of the woodchip to the mill - Individually arranged kniv...

Atlas Copco GA 15 FF screw compressor

• Manufacturer: Atlas-Copco
• Model: GA 15
• Hours: 1,997 hour
• Maximum pressure: 7.5 bar

Atlas Copco oil injected rotary screw compressors are market leaders due to their outstanding efficiency and flexibility. They provide maximum performance at minimum operating cost. GA compressors are designed to...

Central coal furnace for coal and wood 4000 m3

The furnace has a special internal construction, consisting of 31 flame pipes, through which hot gases pass through, heating pipes with a diameter of 70 mm. The turbine draws in cold air that spins between hot pi...

2001 Gas forced circulation hardening furnace

• Manufacturer: FAIRBANK BREARLEY

Chamber furnaces are designed for heat treatment of materials (mainly heat improvement of steel: hardening and tempering). Thanks to their robust construction, high reliability and a wide range of sizes and acces...

Roller table feeder roller conveyor with motor

The roller table can be used as a part of the line or as a separate element for transporting profiles, pipes, rolls, etc. The feeder is equipped with feeding speed adjustment. Technical parameters

2006 POR Super Oscar briquetting machine 27.5 kW

- overhauled - made in Italy - year of production 2006 - DTR

Fan, turbine WTK 50

Engine: 50 kW | Performance approximately: 30000 m3/h | Engine revs: 2960 | Rotor blade height: 230 mm | Rotor rotation: 2350 | Number of blades: 8 | Inlet diameter: 500 mm | Outlet dimension: 480 x 380 mm | Dim...

Compressor Atlas Copco AC100E 500 compressor

• Manufacturer: Atlas-Copco
• Model: AC 100E

The series of AC compressors with oil lubrication are slow-speed compressors that guarantee an extremely long service life. Cast iron cylinders with slow-running pistons have been known for years for their durabi...

Compressor G 7 ATLAS COPCO

• Manufacturer: Atlas-Copco
• Model: G 7

- CE certificate - motor power 7.5 kW Advantages: - High efficiency. - Low energy consumption. - Constant pressure dew point of the dehumidifier. - Condensate condensate does not freeze. - Condensate does not ent...

1992 Atlas Copco GA 11 compressor with dryer, 900l

• Manufacturer: Atlas-Copco
• Model: GA 11

- overhauled - Swedish brand - year of production 1992 - dehumidifier Is a high capacity machine. It is combined with a tank with a capacity of as much as 900 l and a dehumidifier. The screw compressor is charact...

Conveyor 9000 for woodchips, sawdust

- length 9000 mm - width 500 mm

Conveyor belt feed table 7000

- length 7000 mm - width 200 mm - height from base 820 +/- 80 mm

Outlet spigot for spiro pipe

Available outlet spigots with diameters: - 160 mm - net PLN 440 - 180 mm - net PLN 440 - 200 mm - net PLN 440 - 250 mm - net PLN 440 - 305 mm - net PLN 660 - 325 mm - net PLN 660.

Plastic bag for sawdust, shavings, waste, dust fi 500 x 1200 mm

TECHNICAL PARAMETERS: - diameter 500 mm - length 1200 mm - width 800 mm, 1600 mm (circumference after unfolding) - thickness 110 microns (0,11 mm) These bags are designed for e.g. extraction devices, mounted as a...