New Machine Tools in Lombardy, Italy

grinding machine for linear tools

Automatic grinding machine for a perfect grinding of the cutting edge on linear tools, with an inclination well determined by a special tool holder. The oscillation and the micrometric feed of the wheel are autom...

Donaldson BOFA AD 350 fume purifier with START/STOP signal for laser machines

• Manufacturer: Donaldson / Torit / DCE

DONALDSON BOFA AD 350 380 m3/h (224 cfm) flue gas purifier with START/STOP signal. Donaldson BOFA AD 350 multi-stage purifier with a flow rate of 380 m3. The BOFA AD350 fume extraction and filtration system effec...

CF/CP MDM Normal

Horizontal centrifugal casting machine with manual winding of the spring. The metal is melted by a flame torch through the safety lid. The centrifuge is installed in a work bench that includes: the centrifuge con...

MINIVACUMETAL

• Manufacturer: Mario Di Maio SpA

Extremely functional and compact, this bench-top vacuum microcasting unit was designed for small goldsmith shops with low output. The machine has an on/off switch and operating light, vacuum pump, vacuometer, air...

VACWAX Automatic Vacuum Wax Injector

• Manufacturer: VACWAX

The work cycle in this automatic vacuum wax injector is directly controlled by a nozzle that is easy to replace. The automatic work cycle parameters are set through a few simple commands on the userfriendly contr...

Special transfer with numerical control

• Manufacturer: Record

NC system designed and manufactured for drilling titanium engine rings for aerospace 5 drilling units rotary table with workpiece pallets Automatic loading and unloading

CF/CP AMERICA

• Manufacturer: CF/CP AMERICA

Casting system that combines three fundamental phases of the lost wax casting process in one work bench: flask investment degassing, flask dewaxing in the kiln, and metal casting in a special vacuum chamber. The ...

0429E-2 Cutter "SW" type

Cutter "SW" type, double lever, side cut

Cut Wax Blocks

Special wax that can be cut, filed, drilled and even machined without deforming nor breaking into pieces because it is not brittle. Wax can be easily worked and does not stick to cutting tools . Green type wax (n...

HYPERVACUUM 50

Hypervacuum (400V~3). The special design permits this pump to work nonstop around the clock. The vacuum process of the liquid investment takes place quickly and effectively to eliminate flaws and air bubbles in t...

Vacusystem

• Manufacturer: Mario Di Maio SpA

Casting system that combine three fundamental phases of the lost wax casting process in compact structure: flask investment degassing, metal melting and vacuum casting. We foresee one normal version with electric...

VACUMETAL

• Manufacturer: Mario Di Maio SpA

Vacumetal (400V~3) Strong compact and functional vacuum microcasting unit designed for medium and large goldsmith shops with high output. It is composed of: sturdy metal work bench (the top is covered with refrac...

HYPERVACUUM 20

Hypervacuum (230V~1).The special design permits this pump to work non stop around the clock. The vacuum process of the liquid investment takes place quickly and effectively to eliminate flaws and air bubbles in t...

DEINVEST Minibench

• Manufacturer: Mario Di Maio SpA

Bench top deinvesting cabinet, this equipment is the rational solution to quickly the investment form burned flasks. Recommended for small and medium size productions, by means of a high pressure water jet disint...

Goldvibromatic MDM

• Manufacturer: Mario Di Maio SpA

Goldvibromat is a shoe scrubber powered by a special noiseless , ultra flat, hermatically sealed, insulated and waterproof motor, designed to be placed in higt traffic areas of the workshop. Goldvibromat automati...