Used separator

Sandbunker 35 m³

Cone length 500 mm Sith framework not very high Without extraction belt which is sold separately

Loading band, 3500 mm x 500 mm

External dimensions: length 4000 mm, width 1450 mm, hauteur 2150 mm With small loading hopper, on feet V-belt drive, separated gear box

1989 Semi-automatic moulding plant HWS-HSP-2

• Manufacturer: HWS-Sinto

With sand hopper and extraction belt With turning table With roll-over With two-hand control board SIEMENS S5 With mould assembly station With transfer trolley With push-out station With vibrating separation channel

2009 Amine Gas Washer BGT, 9000 m³/h

• Manufacturer: BGT

Dimensions scrubber: Ø 1200mm; height: 7580mm (total: 10580mm) + chimney: Ø500mm height: 3000mm With solids separator With fan With control unit With collecting basin: Ø1600mm; height: 750mm

Chill, 350 mm x150 mm x 100 mm

Outside dimensions: L 620/740 mm, with holders, width 250 mm With a half separation in the middle 350 mm x1 50 mm x 100 mm Very conic at the bottom, with 2 holders

1991 Permanent overband magnet, width 700mm

Motor: 2,2 kW, 380 V, brand BAUER, 50 Hz, type: drum motor Overhead magnetic separator With belt tension With supervision With cover plate made off stainless steel With suspension device

Vibrating polishing machine, brand RÖSSLER 2.2x0.6 m.

Type: R1000LT, serial number: 145/77 In good condition 2 vibrating motors, 220 / 380V With stainless steel basin, agitator, pre-separator With sludge pump (compressed air) Tank with polyurethane filter

Greensand mixer capacity 5-6 t /h, SPEEDMULLOR 30A

Motor NORMACEM 13,2 kW, 220/380 V, 960 rpm Direct drive without gearbox, 2 horizontal grinding wheels With switch cabinet, pneumatic cover for sand filling, idem separated for the additives

Small permanent drum magnet with drive

• Manufacturer: BMD

External dimensions: length 800 mm, width 620 mm, height 780 mm Engine OBERMOSER: 380 V; 0,5 CV, type: reducer drum speed ± 170 rpm/min in solid housing drive over chaine 2 outlets for separating

Nobake moulding plant IMF

± 150 m rolling conveyor 4 x transfer wagons Mixer IMF, 30 t/h, equipped for furan process ROLLOVER with mould/pattern separation Mould manipulator IMF for overhead crane Painting station Pattern Fastloop

Shake-out grid 2400 mm x 2300 mm

External dimensions: 2700 mm x 2300 mm, h. 2570 mm (on foot) Motor ELEKTRIM, 18,5 kW, 380/415 V, 977 rpm With conus on the exit, with one vibrating axle motor on a separate base The grate is on 4 rubber blocs

Small permanent drum magnet with drive

• Manufacturer: BMD

External dimensions: length 900 mm, width 570 mm, height 1180 mm Engine BAUER: 380 V; 0,5 CV; type: reducer drum speed 175 rpm/min in solid housing drive over 2 V-belts 2 outlets for separating

Ladle heating station PROMEOS

• Manufacturer: Prometeos

Serial number: 00131010360µYear of construction: 2013 Dimensions: Length: 2000mm, Width: 2200mm; Height: 2600mm Made for siphon pans Burner insert 600mm For natural gas H; 10 ±0,05Wh/m³ Each machine has an operat...

Amine Gas Washer BGT, 20 000 m³/h

• Manufacturer: BGT

400/690V; 29kW; 50HZ With protection basin: Ø2200mm; Height: 750mm; Volume: 2,85m³ With PH-electrode and control unit With control unit S7-300 With dust separator With exhaust fan With chimney With CE in document...