Used disks

ABANAKI SMD18 DISK OIL SKIMMER T264180

• Manufacturer: ABANAKI

Extra Information Brand: ABANAKI MPN: SMD18 Shipping Weight: 16 LBS Shipping Dimensions: 27 (in) × 25 (in) × 17 (in)

KenAg 15" Non-Gauze Disk--10 Boxes of 100

KenAg 15" non-gauze disk filters are designed for gravity filtration. Case of 10 boxes of 100 filters weighs 27 lbs.

KenAg D104 2-1/4" Non-Gauze Disk--10 x 300

KenAg Non-Gauze Milk Filters from Farm & Ranch Depot! 2-1/4" non-gauze disk filters are designed for gravity filtration. (6 1/2" filters pictured)

HEPA 3150-0276 DISK DRIVE FILTER T33764

• Manufacturer: Hepa

Rated Cfm 26 at .4'' W.G. Pressure Drop. Dop Pen. 1.0% Extra Information Brand: Hepa MPN: 3150-0276 Shipping Weight: 5 LBS Shipping Dimensions: 12 (in) × 8 (in) ...

66" Precision Chipper

66" with 5" disk | 42" pulley | 8 grove | type B

Shot And Sand Mill 0.22 m3 (7.8 ft3) Stainless Steel 304 - IPP# 203418

• Manufacturer: Asada Machine Works

jacketed, Mecha Gaper grain mill motor with UL label. Closed design suitable for solvent based coatings. Chamber is has a SS cooling jacket Disks are UHMW (non metalic high wear material). Bottom inlet, top disch...

Shot And Sand Mill 0.22 m3 (7.8 ft3) Stainless Steel 304 - IPP# 203417

• Manufacturer: Asada Machine Works

220 liter (60 gallon) jacketed, Mecha Gaper grain mill. with UL label. Closed design suitable for solvent based coatings. Chamber has a SS cooling jacket Disks are UHMW (non metalic high wear material). Bottom in...

BMC Disk screen

Used disk screen BMC Disk Screen for separating different materials The BMC Disk Screen separator is can be used for heavy or light materials to separate plastic from: wood, paper, iron, stone and much more! It i...

Shot And Sand Mill 0.22 m3 (7.8 ft3) Stainless Steel 304 - IPP# 203411

• Manufacturer: Asada Machine Works

Dual Mounted jacketed, Mecha Gaper grain mills The design is two seperated complete mill mounted on a common stand. with UL label Closed design suitable for solvent based coatings Each chamber has a SS cooling ja...

Shot And Sand Mill Stainless Steel 304 - IPP# 105429

• Manufacturer: Netzsch

bead mill Type 574-04-21, Order #201869. Full load 14.7 amp. Currently set up as a disk agitator, but can also be used with a peg agitator. Nylon coated concentric disc arrangement; nylon coated SS shaft. Has wat...

500 LB/HR Reduction Engineering Pulverizer, Model 85X

• Manufacturer: Reduction

Reduction Engineering Pulverizer Model 85X 500 LB/HR Approximate Output @ 35 Mesh For LLDPE, HDPE Water Jacketed Milling Chamber Material Hopper Vibratory Feeder Material Transfer System With 10 HP Blower, .5 HP ...

24" X 40" Cumberland X1000, 100 HP, Hardfaced Rotor, New In 2023

• Manufacturer: Cumberland
• Model: X1000

Used 24" x 40" Cumberland Model X1000, 100 HP Three Knife Open Rotor 2 Bed Knives Hard Faced Rotor Hard Faced Cutting 100 HP AC Motor Hydraulic Hopper Tilt Rotating End Disks New In 2023 DOES NOT INCLUDE STARTER ...

8 / 12 LITERS NETZSCH HORIZONTAL MEDIA MILL

• Manufacturer: Netzsch

1 – USED 8 / 12 LITERS NETZSCH HORIZONTAL MEDIA MILL - Type 506 08/574.12 - Molenex Style Rotor - Has Steel Disks - Jacketed Chamber - 20 HP Motor, 3 Phase, 200 / 208 Voltage, Variable Speed - Push Button Contro...