- Trusted Seller

88 in. x 28 ft. Cedarapids Portable Counterflow Dryer
- Manufacturer: Cedarapids
-Nominal 88” x 28’ shell -Reported in good condition -50 HP Cradle Chain Drive with a heavy-duty Concentric Shaft type gear reducer -Right Hand Discharge (from burner end) -Maxon Type 592 Burner -Genco Genie Semi...
USA - Trusted Seller

New Wemco-Style Round Tank Flotation cells
- Manufacturer: Wemco
- New round tank flotation cells - Made to order in North America - Complete with mechanism - All necessary cell and mechanism parts coated with protective 520 natural rubber (including discharge flume) - Feed, u...
USA - Trusted Seller

Triple Start Spiral Concentrators
Triple Start Spiral Concentrators - Effective and low-cost solution for gravity separation - 24 units available - "Triple start” type - They accept up to 3 different streams of feed - Includes distributors and la...
USA - Trusted Seller

300 Sq Ft model 30 US Filter Auto Jet Leaf Filter
- Manufacturer: US Filter
- 300 Sq Ft pressure leaf filter - Auto Jet - Made by US Filter - Self cleaning - 316 stainless steel - Approximately 25 cubic foot capacity, 700 gallons - 54 x 60 inch drum - 150 PSI and 200F rating - 10 inch di...
USA - Trusted Seller

New Denver-style Sub-A flotation cell mechanisms
- Drop-in replacement of Denver Sub-A flotation mechanism - Complete mechanism with rubber coated standpipe and wear parts - Interchangeable with original Denver Equipment Company mechanisms - Made in North Ameri...
USA - Trusted Seller

Model 120 Wemco Flotation Cell Mechanisms and Tanks
- Manufacturer: Wemco
- Wemco model 120 Flotation cell mechanisms and tanks - Rubber and Polyurethane wear parts - Removed and ready for inspection or shipment - Available as bare mechanisms for spares, or as complete used cells with ...
USA - Trusted Seller

100 Cu. Ft. MinPro flotation cells
- 32 cells available; 1 bank of 12, 2 banks of 10 - 100 cubic feet per cell - Cleaned, painted, tested - Rubber and bearings in good condition - Motors, belts, and pulleys included - - Launder boxes required - Pr...
USA - Trusted Seller

Wemco 164 Flotation Mechanisms
- Manufacturer: Wemco
Wemco model 164 Flotation Mechanisms - For 1,000 cubic foot square tank - Rubber wear parts - Removed and in storage - Operates with 100 HP motor (used, included) - 3 units available - Offered as is - EX works st...
USA - Trusted Seller

Denver Flotation Mechanisms
Denver Flotation Mechanisms 2 units, approx. 8 ft long - Urethane 27.5 in. diameter rotors and 36 in. diameter stators - 30 in. diameter 4 belt sheaves 23 units, approx. 6' long - Urethane 27.5 in. diameter rotor...
USA - Trusted Seller

Flotation Level Control
Flotation Level Control Systems: Automated flotation tank level control through automated darrt valve actuator - Rosemount differential pressure sensor flange mounted to cells - Fisher Type 657 diaphragm actuator...
USA - Trusted Seller

12 x 5 ft Outotec Unused Surplus SAG Mill with 350 HP
- Manufacturer: Larox
- Unused surplus Meso Outotec SAG mill - Still in factory packaging - Delivered, never installed or used - 12.1 ft diameter (3.7 m) - 5 ft length (1.5 m) - Trunnion supported mill with ring and pinion gearset - 3...
USA - Trusted Seller

20 x 10 ft (6.1 x 3.05 m) ANI FLSmidth SAG Mill with 2,500 HP
- Manufacturer: FLSmidth
- 20 ft diameter by 10 ft shell (6.1 x 3.05 meter) - Manufactured by ANI/FLS - Includes WEG 2,500 HP motor - Enclosed gear drive made by David Brown - Inching drive - Mill is currently operational and installed -...
USA - Trusted Seller

21 x 11 ft Hardinge SAG mill with 2,875 HP
- Manufacturer: Hardinge
21 x 11 ft Hardinge SAG mill with 2,875 HP - Mill is currently removed and in storage - Without liners or bolt package - Nuttall gear reducer - McLellan liner handler available separately - Spare motor available...
USA - Trusted Seller

22 x 7 ft (6.7 x 2.1 m) Hardinge SAG Mills
- Manufacturer: Hardinge
22 ft x 7 ft (7 x 2 m) Hardinge SAG Mills - Motor Quoted separately - Previously ran on two 800 HP motors - Dual Flender gearboxes - Shell reconditioned
USA - Trusted Seller

32 x 12 ft (9.8 x 3.6 m) Hardinge Koppers ( Metso) SAG Mill 6800 HP
- Manufacturer: Hardinge
32 x 12 ft (9.8 x 3.7 m) Hardinge Koppers SAG Mill 6800 HP (5100 kW) Two GE wound rotor induction motors: - 3400 HP - 710 RPM - 4000 V - Includes motor starter. - Includes lube system and temperature sensors. - F...
USA

