Used Press Brakes in Indiana, USA

Amada RG-50 Brake Press

• Manufacturer: Amada
• Model: RG-50
• Stroke length: 150 mm
• Throat depth: 315 mm

Amada RG-50 Brake Press Amada RG-50 Brake Press Serial Number 505423 Year of Manufacture 1985 Hours of Use 1467 Comes with the crate full of dyes. The weight of the creative dies is over 1500 pounds. This press i...

15 Ton 20' Hydraulic Press Brake Punch C-Frame 11-Hole Steel Hole Punch

• Manufacturer: UnitTool

In Good Used Condition. Removed From a Working Environment. Press Brake Set Up For 11-Hole Punch. UnitTool 4M 2-1/4 Punches. 7/16" Holes. 15 Ton Capacity. 20' Bed Length. 21' 6" Throat Opening. 5" Bed Width. 6...

Amada HFE 1000-35 Press Brake 112 Ton x 10' 122" Hydraulic CNC 200mm Stroke 460V

• Manufacturer: Amada

Used and removed from a working environment. We were unable to make the unit operate and therefore could not test it at our location. This unit is setup with safety curtains and programing. Can be inspected at o...

Chicago Mechanical Press Brake 25 Ton 6' Ram 2" Stroke 1.5Hp 460V Missing valve

• Manufacturer: Chicago
• Capacity: 25,000 kg
• Stroke length: 50.8 mm

Press brake in good Mechanical condition. Switched to electric over air but is missing the valve. Will need serviced, panel is missing some contol switches. We are unable to fully test. Motor Tested @ 460V. Mode...

Press Brake Die 97" Long 90°

Used, in Good Working Condition. Has surface rust. The V is 90°. 1/4" wide and 1/8" deep. Die is 1-3/4" high and 1-1/16" wide. Tang is 1/2" wide and 5/8" deep. If this item ships as Flat Rate Freight please see d...

Press Brake Punch Die Set 90" Long 30° Offset V 1/2" Tang

Used, in Good Working Condition. These were beside each other on the rack. The punch has a 25° angle and the die has a 30°. Looks like 5-1/2" shut height without the tang. If this item ships as Flat Rate Freight ...

Wilson Tool Express Rail 8 ft Press Brake Clamp Hydraulic 20mm Safety Tang

• Manufacturer: Wilson

Used, in Good Working Condition. 8' rail Top piece. NS II or NS IV type 20mm tang. Hydraulic clamping. We do not have the hydraulic unit or controls. You will need safety tang die tools. If this item ships as Fl...

Wilson Tool Express Rail 8 ft Press Brake Clamp Hydraulic 20mm Safety Tang

• Manufacturer: Wilson

Used, in Good Working Condition. 8' rail Top piece. NS II or NS IV type 20mm tang. Hydraulic clamping. We do not have the hydraulic unit or controls. You will need safety tang die tools. If this item ships as Fl...

Press Brake Die 145" Long 90° 1" V With 1/2 x 5/8" Shank

Used, in Good Working Condition. Has surface rust. If this item ships as Flat Rate Freight please see details in Shipping tab

Press Brake Die Punch Set 120-7/16" Long Double 90° V 7/16" Wide 1/2" Tang

Used, in Good Working Condition. Has some surface rust. Selling as a set. Has a offset 90° V. The set is to make 2 bends in one press. The V is 7/16" Wide 1/4" deep. Each one is 2-3/4" high and 1-1/8" wide. If th...

Press Brake Punch & Die Holder 124" Length 16 Keyed Bolt Holes W/Crack Lot of 2

Used, in Good Working Condition. One side has a crack see photos. Lot of 2. Has surface rust. If this item ships as Flat Rate Freight please see details in Shipping tab

Press Brake Punch Die Set 72-13/16" Long 80° Offset Z Bend 1/16" Deep

Used, in Good Working Condition. Has surface rust. These are a set. Makes a small offset. The "V" is 7/32" wide and 1/16" deep. 1/2" tang. Offset. 2-3/4" h and 1-3/16" wide. If this item ships as Flat Rate Freigh...

Press Brake Punch Die Set 50-13/16" Long 90° Offset Z Bend 7/8" W 1/2" D

Used, in Good Working Condition. Some surface rust. Offset Z. Punches 2 bends in one press. The V is 90°. 7/8" wide 1/2" deep. 1/2" tang. If this item ships as Flat Rate Freight please see details in Shipping tab

Press Brake Offset Tang Base 94" Long 5" Wide 1-1/2" Offset 7/16" Tang

Used, in Good Working Condition. Has surface rust. Looks to be an offset die holder. Offsets the die by an 1-1/2". Has a 1/2" slot to bolt a 1/2" tang piece. T slot or safety tang. This is 7/16" wide. If this ite...

Press Brake Punch Die Set 97" Long 90° Offset Z Bend 3/8" W 3/16" D

Used, in Good Working Condition. Has some surface rust. This is a Z die set. 2 bends in one press. 90° V 3/8" wide 3/16" deep If this item ships as Flat Rate Freight please see details in Shipping tab