Used Granulators & Pelletizers in Illinois, USA

NELMOR G1820M1 GRANULATOR 18469

• Manufacturer: Nelmor

Nelmor model G1820M1. No S/N. 18″ x 20″ feed throat. 3 knife open rotor, 2 bed knives. Tangential cutting chamber. 30 HP 230/460-volt motor. Insulated conveyor feed hopper and body panels. 6″ OD right hand airvey...

Nelmor G1012P1 Granulator

• Manufacturer: Nelmor

In-feed: Double Wall Tray Feed | Cutting chamber: 10” x 12” | Rotor: 3 Knife Solid | Bed knives: D2 Tool Steel | Screen: 5/16” Diameter | Base: Mounted on Casters | Discharge: Bin | Motor: 15 HP 460-Volt | Contr...

CDL UNDERWATER PELLETIZING SYSTEM 17625

One (1) used incomplete CDL model UWP36620 underwater pelletizing system. Includes 20 HP cutter less cutting hub, 48 hole electrically heated die, and water tempering system including pump, S/N DB06. Job number J...

GALA #6 PELLETIZING SYSTEM 18890

One used Gala Underwater Model 6 Pelletizing system. S/N 890502. Includes #6DMUP cutter head with die and water box, free standing panel with controls and 80 GPM water system with Model 8.1 spin dryer. Manufactur...

RAPID 2442RS HOG GRANULATOR 18808

Used Rapid model 2442RS hog granulator. S/N 85.859, 24″ x 42″ feed throat. 20 knife hog rotor. 3 bed knives. Dual flywheels. Conveyor in-feed hopper with pneumatic tilt back assist. Hopper conveyor in-feed is clo...

PTI WATER RING PELLETIZING LINE 18007

One (1) used 1999 PTI pelletizing line with model TS4500 4.5″ 30:1 L/D extruder having an electrically heated, water cooled (closed loop), and side vented barrel at a nominal 42″ center-line height. The gearbox i...

POLYMER 1010AE AUGER GRANULATOR 16721

Polymer model 1010AE auger granulator, S/N 1010AE443796. 10″ x 10″ feed throat, 3 knife solid rotor, 2 bed knife cutting chamber, 10HP 460V motor. 8″ OD auger with a 12″ x 47″ long auger area and a 30″ in-feed he...

CUMBERLAND 2050H HOG GRANULATOR 18724

• Manufacturer: Cumberland

Cumberland model 2050H granulator. S/N 551000-86001. 20″ x 50″ feed throat. 18 knife hog rotor. 2 bed knives (4 pcs) with one in the raised position. No in-feed hopper. 160mm rotor bearings with air purge. Belt d...

CUMBERLAND 8″ PELLETIZER ROTOR 24 8429

• Manufacturer: Cumberland

Cumberland 8″ pelletizer rotor 24 tooth solid rotor helical cutter. Ceco part number 64743.

NELMOR G1220M1 GRANULATOR WITH SIDE 16617

• Manufacturer: Nelmor

Nelmor model G1220M1 granulator. S/N 7612-10077. 12″ x 20″ feed throat, 3 knife solid rotor, 2 bed knife. 20HP 230/460V motor. Single wall tray feed hopper evacuated by a side mounted Nelmor model F410 1HP blower...

NELMOR G1220M1 GRANULATOR WITH PIPE 16678

• Manufacturer: Nelmor

Nelmor model G1220M1 granulator. S/N 8010-15995. 12″ x 20″ feed throat, 3 knife solid rotor, 2 bed knife, 25HP 230/460V motor. Left hand 10″ x 5.75″ side profile chute, in-feed only. Side mounted 5003FD 3HP blowe...

WEIMA ZMK60 SHREDDER WITH GRANULATOR 18272

• Manufacturer: Weima

Used shredder / grinder combination system including the following:Weima four shaft shredder model ZMK60 with dual 25 HP 460-volt motors and controls. Has a 74″ x 55″ hopper opening narrowing to a 27″ x 50″ wide ...

GRANUTEC TFG1624.75 GRANULATOR 14238

Granutec model TFG1624.75 granulator s/n 793.2093 16″ x 24″ feed throat 3 knife open rotor 2 bed knife 75 hp 230/460 volt motor insulated tray feed hopper tangential cutting chamber 6″ left hand airveyor discharg...

MA INDUSTRIES 737 GRANULATOR 17261

MA Industries model 737 granulator (Cumberland 37B clone), S/N P737-1005. 18″ x 37″ feed throat, 3 knife high shear rotor, 2 bed knife. 100HP 460V motor, 6″ OD rear airveyor discharge mounted to a 52″ tall step b...

CUMBERLAND 284 GRANULATOR WITH FEED 17466

• Manufacturer: Cumberland

Cumberland model 284 granulator, S/N 525525-84012, 10″ x 12″ feed throat, 3 knife open slant cut rotor, 2 bed knife, 7.5 HP 460-volt motor, insulated tray feed hopper with rear facing 8″ wide knurled steel and in...