Used Drilling Rigs

2003 SANDVIK D55SP

• Manufacturer: Sandvik

DTH Class 3508 Cat Engine Single Pass Unit Currently using a 8” DTH Hammer with a 9” Bit Equipped w/ ( 2 ) 6 ½” x 25 ft. Drill Pipe w/ 8” DTH Hammer Dust Collector Mast 73’ Long, U/C 85% – Excellent condition. Un...

2014 ATLAS COPCO FLEXIROC T45-10

• Manufacturer: Atlas-Copco
• Model: FLEXIROC T45

2014 Year – Atlas Copco FlexiRoc T45-10 Powered by a Caterpillar C9.3 Diesel Engine472 CFM @ 174 PSI onboard Air Compressor COP3060 Drifter 13,219 Total Hours 4,922 Percussion Hours Set up for T51 (51mm) Drill St...

1996 INGERSOLL-RAND CM695D

• Manufacturer: Ingersoll Rand
• Model: CM-695D

DTH Class Four (4) Machines for the PRICE OF ONE! Being Sold as a Complete Pkg. Only QTY. 4 – CM695D $85,000 Buys the Package CAT 3306 Diesel Engines HIGH Pressure IR Air Compressors for DTH Drilling (Qty. 1) – F...

GILL BEETLE

DTH Class Drills Holes 4 to 24 in Diameter Able to Drill Holes Vertically, Horizontally, and Every Angle in Between Has a Hydraulic table for up to 9 opening IR-360 DTH Hammer w/ Bits 8.5 and 7.5 IR-350 DTH Hamme...

2008 ATLAS COPCO ECM720

• Manufacturer: Atlas-Copco
• Model: ECM 720

4.5 – 5.5 Inch Class Montabert HC200A Drifter Cat C11 Engine Set up for 60mm drill steel Only 3570 Total Hours

2008 INGERSOLL-RAND ECM720

• Manufacturer: Ingersoll Rand
• Model: ECM-720

4.5 – 5.5 Inch Class Montabert HC200A Drifter Cat C11 Engine Set up for 60mm drill steel Only 3570 Total Hours

2021 Furukawa HCR1450-EDII

• Manufacturer: Furukawa
• Model: HCR1450EDII
• Hours: 2,231 hour

2021 Furukawa HCR1450-EDII. 2231 Hours with 1068 Drifter Hours. HD828S Drifter. Currently set up for T514 Drill Steel. Available for inspection in Louisville, Ky.

2020 Sandvik DP1500I

• Manufacturer: Sandvik
• Model: DP1500

2,295 total hours & 1,015 percussion hours Cat C13 Tier 4 Diesel Engine Drifter / Rock Drill is a RD1635CF Excellent condition

2005 CATERPILLAR MD5090

• Manufacturer: Caterpillar
• Model: MD5090

3.5 – 4.5 Inch Class HPR1H-ATW Hammer CAT C9 Diesel Engine Low Hours Set up for T45 and long feed for 20′ drill steel Excellent Condition

2000 REEDRILL 400C

• Manufacturer: Reedrill

3.5” – 4.5” Inch Class CAT Diesel Engine Cab & Rod Changer – Hydraulic Drill 4600 total hours New Hydraulic Rotation Pump

2014 ATLAS COPCO FLEXIROC D60

• Manufacturer: Atlas-Copco
• Model: FLEXIROC D60

DTH Class Cat C15 Tier 4 Final Diesel Engine Total Engine Hours 3917 4” Drill Pipe w/ 6” DTH Hammer Set up to handle 4” Drill Pipe x 16.5’ Ft Length Rotary Head hours: 2700 Condition: Used. No major issues. 2014 ...

2011 FURUKAWA DCR20

• Manufacturer: Furukawa
• Model: DCR20

3.5 – 6.5 Inch Class CAT C-13 Tier III Engine 3 Drill Pipe Estimated 6000 Total Hours with less than 500 hours on out of Frame Rebuild by CAT with warranty Angle Indicator

2006 SOOSAN SD1000E

• Manufacturer: Soosan

3.5 – 4.5 Inch Class SP-3 Drifter Cummins 5.9L Diesel – Installed New w/ Only 438 Hours Enclosed Cab w/ AC Extendable Boom Rod Changer Unit Running T45 Drill Steel

2013 MONTABERT MICRO CPA360

• Manufacturer: Montabert

Montabert Micro CPA Package Bobcat Mini Excavator E60 w/ 600 Hours HB980 Hydraulic Breaker w/ 120 Hours Doosan P185WJD-T4i Portable Air Compressor w/ 84 Hours Hydraulic Clamp, E60 Micro CPA Drilling Attachment Th...

1993 INGERSOLL-RAND DML

• Manufacturer: Ingersoll Rand

4.5 – 5.5 Inch Class CAT 3412 Diesel Engine w/ Only 1,500 Hours Since Rebuild Runs 30ft Drill Steel High Pressure Unit w/ On-Board IR HR2 1050 CFM / 350 PSI New Pump Drive and Double Motor Spur Gear Head

Tamrock Pantera 1100 Drilling Rig

• Manufacturer: Tamrock
• Model: Pantera 1100

Good condition Tamrock Pantera 1100 Drilling Rigs available between 1998 and 2005 years. Located in USA and other countries. Click request price for more information.