Used electronics in Wallonia, Belgium

Microwaves tester HÖR - ELECTRONIC, type MLT4

With battery, 9 V In case Weight: ± 1 kg | Dimensions: length 200 mm, width 300 mm, height 80 mm

Gravity die casting machine BÖCKLE /SPRÖTZE, for aluminium, tiltable

Tiltable 90° With hydraulic unit, control box, electronic time régulation

Frequency converter BAUKNECHT 11 kVA

• Manufacturer: Bauknecht

200 V 300 Hz 11 KVA 32 A with electronic exciter

Double polishing machine REMA, type DPN

• Manufacturer: Rema

2,2 - 3 kW; 1450/2900 rpm; 220 V 2 electronic speeds

Frequency converter HIMMELWERKE, 15 kVA 200 V. 300HZ.

15 kVA, 200 V, 300 Hz With electronic exciter Control box on request against additional cost

Frequency converter AVK, 11 KVA, 200 V, 300 Hz

Type: DASR 25/11-2/12, serial number: 1112978 Weight: 250 kg With electronic exciter 12 V

Frequency converter AVK, 11 KVA, 200 V, 300 Hz

• Manufacturer: AVK

With electronic exciter 12 V Wit newly rewinded motor 200 V, 300 Hz, 11 kVA New control board for an extra charge

Double floor type grinder HUARD Ø 500mm, 45 m/s

• Manufacturer: Huard

Motor ABRITE, type: NA12564, serial number: 49574, 4,4 kW Shelves 1 x 410 x 230mm, 1 x 300 x 200mm With electronic control

Sand plant DISA, 120 t/h

400 V, 50 Hz - Mixer DISA SAM16-160 - Sand hopper ± 150 m³ and continious sand circulation system - 3 additive hopper, dosing screws - Sand analyzer - Sand and additive weighing - Sand elevator - Polygon screen -...

Core shooter LAEMPE 40 l

• Manufacturer: Laempe / Röperwerk

Air tank 100 l, clamp with vacuum plate Gassing carriage with vacuum clamping, gassing plate 1000 mm x 800 mm Electronic control PLC B&R (BERCHNECKER UND RAINER), Type NT33 Welded construction Motor for the hydra...

1998 Core shooter LAEMPE LB20

• Manufacturer: Laempe / Röperwerk

Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...

1998 Core shooter LAEMPE with core mixer LAEMPE SM6_3

• Manufacturer: Laempe / Röperwerk

Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...

1998 Core shooter LAEMPE with core mixer LAEMPE SM6_3

• Manufacturer: Laempe / Röperwerk

Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...