Used Cnc Lathes in Illinois, USA

2012 HAAS ST-30

• Manufacturer: Haas
• Model: ST-30

2012 Haas ST-30 CNC Turning Center. Machine is in great shape with low hours. Machine comes with a 10" chuck (no collet chuck included), chip conveyor, high intensity lighting, high pressure coolant, and an oil s...

2019 SMEC SL-3000

• Manufacturer: SMEC

2023 HARDINGE Talent T42

• Manufacturer: Hardinge
• Model: TALENT 42

Talent 42 Exceptional combination of features for accuracy, flexibility and durability • A2-5 16C collet-ready spindle • Central grease lubrication (manual) • Foot switch main spindle chuck/collet – open/close • ...

2014 DMG MORI SEIKI NTX2000SZM1500

• Manufacturer: DMG Mori
• Model: NTX 2000

Technical Description The specifications below apply to a basic machine without additional options. Specifications in square brackets [ ] are values or features for a machine with additional options. Capacity Max...

2019 Doosan Puma SMX2600ST

• Manufacturer: Doosan
• Model: PUMA SMX2600ST

Control and features Machine type: Vertical Turret Lathes | Machine location: Upon Request | Stock #: 166693 | Maximum turning diameter: 660 mm (26 in.) | Maximum turning length: 1,540 mm (60.6 in.) | Chuck size:...

2020 MILLTRONICS SL8-II

• Manufacturer: Milltronics
• Model: SL8-II

2020 Milltronics SL8 CNC Turning Center with Tailstock. Machine is in very good condition and can be inspected under power as needed. Options include: programmable tailstock, 8" 3 jaw chuck, tailstock, chip conve...

2007 Traub TNX 65/42

• Manufacturer: Traub
• Model: TNX65/42

(4) X-Y-Z Turrets with 10 Positions Each 65 Mm Thru Hole Main and Sub Spindle Weight-22000 Lbs. Control-Tx 8i-S Control (mitsubishi) Equipped With: Sub Spindle Has Coolant Flush Servo Driven Gantry Receiver Hydra...

2013 Okuma Genos L300-MW

• Manufacturer: Okuma
• Model: GENOS L300

Equipped With: Machine type: Multi Axis Lathes | Machine location: New Hampshire | Stock #: 378466 | X-axis movement: 9.3″ | Z-axis movement: 18.1″ | C-axis movement: 14.1″ | Workpiece drm: 11.8″ | Number of axis...

2017 Hardinge Talent 51 MSY

• Manufacturer: Hardinge
• Model: TALENT 51

Live tooling, Sub-spindle, Y-axis, Glass Scales 20C 1/2″ Hardinge collet 1.625″ sub-spindle capacity 16C 1/2″ Hardinge collet 16-station bi-directional live tooling BMT 45 turret with 16 + 1/2 station index Equip...

2012 Mori Seiki NLX 2500 SMC/700

• Manufacturer: Mori Seiki
• Model: NLX 2500

Equipped With: Tooling and Chuck Rear Exit Chip Conveyor ChipBlaster High-Pressure Coolant System Sub-Spindle Renishaw Probing System

2002 Mori Seiki ZT 2500

• Manufacturer: Mori Seiki
• Model: ZT-2500

Specifications (subject to buyer verification): Equipped With: Chip Conveyor Y-Axis Sub Spindle Dual Turret Live Tooling

HARDINGE CHNC-III

• Manufacturer: Hardinge
• Model: CHNC III

Used Hardinge CHNC-III CNC Lathe. 14" Swing, 1.625" Bar Cap, 10 hp, max 5000 RPM. Machine still runs, however, the spindle was running at 50% power last time they ran this machine. Parts machine, make an offer.

NAKAMURA-TOME SLANT 3BSL

• Manufacturer: Nakamura

NAKAMURA-TOME SLANT 3BSL used CNC lathe offers 27.16" swing, 24" machining length, 2-axis operation, 10" chuck size, 2.5" bar capacity, 25 hp power, 3,500 max RPM, 15.57" turning diameter, and features a tailstoc...

2012 TOOLMEX TUR630MN X 78

• Manufacturer: Toolmex

2012 TOOLMEX TUR630MN X 78 CNC lathe, 24.8" swing, 78" machining length. Features 2-axis control, 15.3" X travel, 78" Z travel, 4" bar capacity, 25 hp power, 2500 RPM max, equipped with tailstock. Perfect for pre...

2006 C.R. Onsrud Inc. 145G12

• Manufacturer: C.R. Onsrud
• Model: 145G12

The controller is currently not working other than that it is a good CNC. (17″ Under Bridge) 6 Vertical Drills in X-Axis 5 Vertical Drills in Y-Axis 2 Horizontal Drills in X-Axis 2 Horizontal Drills in Y-Axis Mov...