Building Filters

15

Used frames in Sichuan, China

  • no-image_en.png

    QCM MJ163C Multi-blade Rip Saw (bottom saw)

    • Manufacturer: QCM

    The machine body(frame) is made of cast iron, stable performance. And in order for operator safety, it is equipped with anti-kick back fingers at the inlet. The feeding speed is controlled by variators. Please as...

    Meishan, China
  • no-image_en.png

    QCM MJ264C Multi-blade Rip Saw(top and bottom saw)

    • Manufacturer: QCM

    1. The machine body(frame) is made of cast iron. 2. Equipped with anti-kick back fingers at the feed inlet, for operator safety. 3. Top and bottom spindles as a whole for manual lifting. 4. Feeding speed is contr...

    Meishan, China
  • no-image_en.png

    QCM MJ263H Multi-blade Rip Saw(top and bottom saw)

    • Manufacturer: QCM

    1. The machine body(frame) is made of cast iron. 2. The upper and bottom spindles are with electric-lifting. 3. Feeding speed is controlled by variator. 4. Equipped with outer fence, in case for off tracking 5. E...

    Meishan, China
  • no-image_en.png

    QCM QMB4018D-GH High-speed Four-side Moulder（5 spindles）

    • Manufacturer: QCM

    1.The machine body(frame) is made of cast rion. 2.With two front bottom spindles, the speed of which is 6800r/min; other is 8000r/min. 3.With cylinder-floating type structure for the front driving bottom roller, ...

    Meishan, China
  • no-image_en.png

    QCM ML9616SM Planer and Sawing Machine

    • Manufacturer: QCM

    Product introduction: 1. This machine can do four-side mouder job and horizontal saw job, first four-side planing then right-left multi-blade saw. 2. The machine body(frame) is made of cast iron, and the worktabl...

    Meishan, China
  • no-image_en.png

    QCM QMB620RL Four-side Moulder（4 vertical spindles）

    • Manufacturer: QCM

    ntroduction: 1. The machine body(frame) is made of cast iron, and the worktable is covered with hard chrome. 2. Six cutter spindles, but four of them are vertical spindles. 3. Equipped with two sets of cylinder f...

    Meishan, China
  • no-image_en.png

    QCM QM6020G Four-side Moulder（six spindles）

    • Manufacturer: QCM

    Product introduction: 1. The machine body(frame) is made of cast iron, and the worktable is covered with hard chrome, wear resistant. 2. Equipped with 2 sets of cylinder-floating bottom active rollers in front of...

    Meishan, China
  • no-image_en.png

    QCM QMX6025M Double-end Tenoner

    • Manufacturer: QCM

    1.The machine base and main frame are made of cast iron. 2.With chain track feeding system, and the feeding speed is controlled by inverter. 3.The upper press belt system is with eletric-lifting, and digital disp...

    Meishan, China
  • no-image_en.png

    QCM QMB623GH / QMB723GH High-speed Four-side Moulder (6 spindles)

    • Manufacturer: QCM

    Introduction: 1. The machine body(frame) is made of cast iron, stable performance. 2. The whole machine is with cover, safe and low noice. 3. The main spindle diameter is φ50. 4. Equipped with 2 sets of cylinder ...

    Meishan, China
  • no-image_en.png

    QCM QMB525DH Automatic Woodworking Planer (Double Angle Type)

    • Manufacturer: QCM

    QMB525DH One-side Planer(bottom spindles) Main Features： 1. The machine bed(frame) is made of iron casting, stable and strong; 2. Synchronously lifting with four columns; 3. Have two oblique cutter spindles, with...

    Meishan, China
  • no-image_en.png

    QCM QMB633H-D Four-side Moulder(6 spindles)

    • Manufacturer: QCM

    Main features： 1.equipped with HMI，precise, easy and quick operation. 2. Automatically adjust the working width and working height, through the touch screen . 3. Beam adopt the electric lifting, and the upper fee...

    Meishan, China
  • no-image_en.png

    QCM QMX8025M Double-end Tenoner（8 spindles）

    • Manufacturer: QCM

    I. Model：QMX8025MDouble-end Tenoner（8 spindles） II. Product Use： This machine is used for double-end edge trimming and tenoning. The maximum working width is 2500mm, maximum working thickness is 120mm. The back t...

    Meishan, China
  • no-image_en.png

    QCM ML9323DM Rip Saw And Planing Union Machine （3 spindles）

    • Manufacturer: QCM

    Product introduction: 1. This machine can do multi-blade rip saw and planing: first saw, then planing. 2. The machine body(frame) is made of cast iron, and the worktable is covered with hard chrome, wear-resistan...

    Meishan, China
  • no-image_en.png

    QCM QMB823GH High-speed Four-side Moulder(8 spindles)

    • Manufacturer: QCM

    I.Product Use： This machine is used for four-side planing or milling shapes of wood. Its maximum working width is 230mm, maximum working thickness is 160mm, feeding speed can reach 60m/min. It has four vertical c...

    Meishan, China
  • no-image_en.png

    QCM QMB720W(5+2) Four-side Moulder（seven spindles 5+2）

    • Manufacturer: QCM

    I. Model：QMB720W Four-side Moulder（seven spindles 5+2） II. Product Use： This machine is for four-side planing and longitudinal lock tenon making, especially for wooden floor processing.Its maximum working width i...

    Meishan, China