Used Industrial Furnaces & Ovens in Wallonia, Belgium

Vibrating conveyor for loading induction furnaces, JÖST

• Manufacturer: Jöst

2 vibrating motors JÖST, type 17110/6, 1,1 kW, 220/380 V, 940 rpm, 450 cmkp Furnace loading conveyor on rails Motorizeted by electromotor

Complete rechange furnace body, 3,2 t

• Manufacturer: ABP

Completely overhauled and modernized by the manufacturer Without the frame

Small tubular induction treatment furnace THERMOLYNE

• Manufacturer: Barnstead/Thermolyne

THERMO SCIENTIFIC Type: F21.100, serial number: F 2112026 240 V, 1250 W With digital display Hand control

Lining vibrating plate for bottom of furnaces, Ø 1050 mm

With 1 motor BOSCH 2850 rpm, 800 W, 220/380 V Ø 1050 mm For refractories on the bottom of furnaces and bigger ladles

Induction furnace INDUCTOTHERM 200 kg, push-out

• Manufacturer: Inductotherm

- 1x VIP power desk - 1x pump station with 2 pumps - 1x cooling tower and spare cooling tower - crucible manipulation system - smoke suction measurement and recorder

Hydraulic cylinder to eject the furnace lining

External dimensions: length 2300 mm, width 370 mm, height 570 mm 2 x 2 fixing holes, Ø 50 mm With 4 lifting eyes With long hydraulic hose

1987 Treatment furnace, electricTHERMCO, 750 °C

• Manufacturer: Thermco Systems

Type: FTT750, serial number: 86456 Year: 1987, weight: 1800 kg With 1 ventilater- aerater behind (1.5 kW; 220/380 V; 1400 rpm) With 1 charging basket on wheels, 1300 mm x 580 mm x 500 mm Manual hand lift door wit...

Laboratory treatment furnace 1000°C HERAEUS

• Manufacturer: Heraeus - Hanau - Vötsch

With thermostat and thermometer In overhauled condition

Exhauster for cupola furnace, 13020 m³/h

WERRA VENTILATOREN Type: R217/1750, serial number: 3423 Year of construction: 1975, weight: 1500 kg In very good condition Isolated, 10 cm glass wool all around

Induction furnace JUNKER, 500 kg, 1000 Hz

• Manufacturer: Junker

Type: MPF ST 500, serial number: WA 26775 580 kVA; 380 V 2 bodies, capacity 500 kg With power desk, cooling tower, hydraulic unit

Induction furnace , 500 kg, 1000 Hz, INDUCTOTHERM

• Manufacturer: Inductotherm

Furnace, condenser, hydraulics, switchgear cabinet Cabinet VIP Powertrac, type 300, ENGINE: 300 kW, entrance cabinet 345 KVA, 50 cycles per second of 380 V, 800A, from 1983 This furnace is on a two-carrier crane...

1981 Melting furnace for brass FOMET, 1000 kg

Channel, electric, fixed In good condition 1000 kg capacity total Output 700 kg, yield 220 kg/h With ventilator for cooling the transformer 220 V 2.2 KW With control cabinet, fume hood, primary voltage by auto-tr...

Electric holding furnace for aluminium, ± 300 kg

• Manufacturer: STEIN & ROUBAIX

Ø crucible: 260 mm, inside depth: 370 mm With switch box and temperature sensor

2015 KURTZ low-pressure casting machine with pressure and holding furnace

• Manufacturer: KURTZ

Dimensions: Length: 4336mm; Width: 3770mm; Height: 6171mm All movements hydraulic: Top movement: max stroke: 1400mm Top movement: Min opening: 600mm; Max opening: 2400mm Cooling: 24x water cooling circuit; 22 x a...

1979 Pouring furnace ABB, 15 t, type OCC150

• Manufacturer: ABB

Electric pouring furnace Pouring furnace: SERT, year of construction 1989 (modernised and overhauled in 2005) Hydraulically movable (follows the AMC) With cooling tower