Building Filters
Müro grooving cutter for block glue carousel or block glue press
- Manufacturer: Müro
The MÜRO groove cutter is used to reinforce the block gluing of brochures, Catalogs, lists, calendars and weighing cards (sets of forms on cardboard backing). Number of grooves per operation: 10 Groove spacing: 9...
Dabergotz, Germany
2005 Polar Mohr DC-M
- Manufacturer: Polar Mohr
Solo punch Label Die cutter POLAR Mohr model DC-M from year of manufacture 2005 works on the push-through principle and is suitable for all common label papers. Due to the simple setup of the punch, the quick too...
Dabergotz, Germany
1999 Renz Kugler Womako 341-2R
- Manufacturer: Renz
Fully automatic high performance die cutter Renz Kugler 341-2R for calendars and ring binders 1 tool for calendar (50cm, pitch 3:1, 4,5×4,5mm with thumb hole) 1 tool for ring binders (approx 32cm, pitch 3:1, 6,5×...
Dabergotz, Germany
1966 Heideberger Druckmaschinen OHZ Modell SBB
- Manufacturer: Heidelberger Druckmaschinen
Origin Heidelberger Zylinder OHZ SBB size 56 x 82 cm only for die cutting year 1966 No. 29052 in very good condition
Dabergotz, Germany
PamaTec OEM Heidelberg PT 220
- Manufacturer: Heidelberg
fully automatic inline bridge punching machine PamaTec OEM Heidelberg PT-220 configured for longitudinal cutting, steel rule cutting, line tools and cross cutting Punches folded layers and single sheets behind th...
Dabergotz, Germany
1975 Heidelberg GTP
- Manufacturer: Heidelberg
- Model: GTP
die-cutting and hot foil stamping machine Original Heidelberg GTP with ART hot foil unit from 1975 No 67720 N max. sheet size: 34 x 46 cm (punching area then 30×42 cm) equipment: - hot foil stamping device with 4...
Dabergotz, Germany
Karl Traenklein USM
- Manufacturer: Karl Traenklein
with one tool for register cut 45°, blade length 40 cm is suitable for punching paper, cardboard, plastic, etc. It can be equipped with numerous easily interchangeable punching tools for a wide variety of punchin...
Dabergotz, Germany
2004 Strati 41
- Manufacturer: Strati
semiautomatic Platen Strati 41 age 2004 cutting plate 107x76cm manual or automatic operation counter quick release frame central lubrication Storage tables on the left and right
Dabergotz, Germany
1999 Renz Kugler 340-2
- Manufacturer: Renz
Automatic punching and perforating machines Renz Kugler 340-2 Masch-Nr. 1943-340-2 built 1999 Max.sheet size: 340 x 340 mm Min. sheet size 120 x 105 mm layer height 3mm speed 80-100 cuts per minute included tool...
Dabergotz, Germany
1999 Zechini gra-for Spezial 85
- Manufacturer: Zechini
Workshop revised condition max. size 38x55cm max. insertion height 44cm
Dabergotz, Germany
Dabergotz, Germany
1987 Renz Super 500
- Manufacturer: Renz
- Model: SUPER 500
- Working width: 500 mm - two tools calendar 4×4 pitches 3:1 and 2:1 - Punching thickness: max. 4.5 mm (tool-dependent) - Punching speed: 400 - 500 cycles/h (depending on operator) - Paper line: horizontal - Pape...
Dabergotz, Germany
Dabergotz, Germany
1979 Krause Biagosch J 138 BN
- Manufacturer: Krause
with 8 circular knives Largest sheet width 1300 mm Largest sheet depth 1000 mm Narrowest strip width 90 mm Passage space 1380 mm Power requirement 1 KW
Dabergotz, Germany
1984 Karl Krause Registerstanze Y 50-12 EM-2
- Manufacturer: Krause
This electric universal punching machine is suitable for punching registers efficiently and reliably on loose layers. The punching process is carried out via a foot pedal. Made of the best tool steel and sturdily...
Dabergotz, Germany