Used Processing in Nebraska, USA

2011 Steinert 40 Inch Eddy Current Separator

• Manufacturer: Steinert

Never put into service! 2011 Steinert 40 Inch Eddy Current Separator Never used! This eddy current separator was purchased for a project and never put into service. It has been sitting in the yard as you see in t...

6 x 6 x 8.5 Batch Oven **INCLUDES REMOVAL & LOADING**

• Manufacturer: Industrial Process Equipment

** INCLUDES REMOVAL & LOADING ** 6 x 6 x 8.5 Batch Oven Natural gas batch oven by Industrial Process Equipment (IPE). 208v/3ph @ 25 amps. Oven is still being used but they need a bigger one. Call us today to set...

Dryoff Ovens

Inline Ovens automatically convey parts “inline” with the rest of the process equipment and can be used to dry parts after the washing process. An Inline Oven can also be used to cure parts after the Powder Coat...

Conveyor Rattler Idler

Conveyor Rattler Idler If you have trouble with material carry back on your conveyor return belt, this rattler is your solution. Condition: New 85% of carry back will rattle off the belt on your pile and not car...

Dryoff Ovens

Inline Ovens automatically convey parts “inline” with the rest of the process equipment and can be used to dry parts after the washing process. An Inline Oven can also be used to cure parts after the Powder Coat...

AUTOMATIC BLAST SYSTEMS

Blast Systems are almost always the bottleneck in any system, but an Automatic Blast System can help you reach your production goals! Depending on your product, and the type of finish you desire, we can design a...

Environmental Rooms

There are a few BIG reasons to use an Environmental Room (EV Room) for your operation. Sometimes called Clean Rooms, these buildings allow you to physically isolate any processes from the rest of the plant enviro...

AUTOMATIC BLAST SYSTEMS

Blast Systems are almost always the bottleneck in any system, but an Automatic Blast System can help you reach your production goals! Depending on your product, and the type of finish you desire, we can design a...

AUTOMATIC POWDER BOOTHS

Automatic Powder Coating Booths are used for higher production products and are typically used in-line of other processes where the product is conveyed into the booth via an overhead or chain-on-edge conveyor. W...

MANUAL BLAST SYSTEMS

If a Manual Blast System is what you need, we have what you’re looking for! Our team of engineers can design a stand-alone system or integrate a system into your finishing operation that will exceed your expectat...

BURN-OFF OVENS

Removal of Powder Coating, Liquid Paint Finishes, E-Coat, Autophoretic, etc. is often a required process on hooks and hanging devices in order to maintain proper Grounding for efficient coating. This is also nece...

Valve GA 400DV-DN2.6-PTFE-SSt (ET)

• Manufacturer: Wagner

The pneumatically operated valves are suitable for switching and dosing liquid products, in particular coating or process products for surface technology and similar products. - The paint valve (PV) is used to s...

Valve GA 400PV-DN2.6-PTFE-TC (ET)

• Manufacturer: Wagner

The pneumatically operated valves are suitable for switching and dosing liquid products, in particular coating or process products for surface technology and similar products. - The paint valve (PV) is used to s...

AUTOMATIC IN-LINE WASHERS

A quality finishing operation always starts with quality pretreatment. A Multi-Stage Inline Washer can be essential in that process! Buy Rite Finishing has been selling top-quality washers for over 50 years and ...

AIR MAKEUP UNITS (AMU)

Industrial Air Makeup Units (AMU), or Makeup Air Units (MAU), are often required to replace the contaminated air that is removed from your building through any finishing process (paint/powder booths, ovens, etc.)...