Used Material Handling in North Carolina, USA

Material Handling

• Manufacturer: Frontmatec

ITEM 2353: FRONTMATEC STAINLESS PORTABLE CONTAINER DUMPER TYPE 27000 SERIES P-19659 460V 7.2 KW 3 PH 60 HZ BUILT 2020 DUMP HEIGHT: 9 FT (108”) CAPACITY: 770 LBS MAXIMUM SIZE OF ITEM TO LIFT: 24” W x 20” D x 25...

Used dry material feeder system

• Manufacturer: Acrison

Used dry material feeder system consisting of a super-sak unloading platform mounted above a small stainless steel vibrating hopper equipped with stainless steel knife valve that discharges to small diameter incl...

HERCULES HYDRAULIC DRUM DUMP MACHINE

• Manufacturer: Hercules

Standard Specifications: * Inquire for additional specifications *

STEFF MAGGI 2034, 3-ROLL POWER FEEDER

• Manufacturer: Maggi
• Model: Steff 2034

STEFF MAGGI 2034, 3-ROLL POWER FEEDER SN:2711747, (440/60/3 electrics), S-5169a Standards Specifications:

55 GALLON DRUM DOLLY

• Manufacturer: 55

55 GALLON DRUM DOLLY H-1948 Standard Specifications:

Bulb Eater

Crushes light bulbs. T-8 and T-12 Fluorescent bulbs. Comes with Hepa filter/filters. Comes with Chain sets (Spinners). SOLD AS IS, WHERE IS. MAY NOT BE AS PICTURED. ALL SALES FINAL.

TUBAR DUMPER MODEL TC

ITEM 2010: TUBAR DUMPER MODEL TC 1000 LB CAPACITY SERIAL D-10089 CARBON STEEL CONSTRUCTION CURRENTLY SET UP FOR 220 V 3 PH MAXIMUM BOX DIMENSIONS 38 ½” W x 49 ½” D x 39” H BOX RETENTION BARS COULD BE MOVED TO INC...

TUBAR BOX DUMPER

ITEM 2011: TUBAR BOX DUMPER WITH HYDRAULIC POWER PACK 48” L x 39” W x 38” H MAX BOX DIMENSIONS PRESSURE SENSING TRIGGER MAT INCLUDED Max. box dimensions are: 39.5”W X 48”L X 66.5”H (38.5”H) … The number in parent...

HOLZ 198, 3-ROLL FEEDER

• Manufacturer: Holz

HOLZ 198, 3-ROLL FEEDER S/N:, S-5044 Standard Specifications: *additional specifications and phots available upon request* ***Not included: S-5043 Jet table saw***

RAIMANN VALUE RIP IV, GANG RIPSAW INFEED SYSTEM

• Manufacturer: Raimann

RAIMANN VALUE RIP IV, GANG RIPSAW INFEED SYSTEM S/N:IR-0210-01 (2005), (460/60/3 electrics), CS-1276-KM Standards Specifications: *Inquire for additional specifications*

STRETCH WRAP MACHINE 4,000 LBS. CAPACITY

S/N:50472C, (110/60/3 electrics), M-018 General Specifications: - 4,000 lbs. capacity - 48" square x 84" high maximum load size - 48" diameter turntable, (3" height off floor) - 20" max. width stretch wrap film -...

(2x) Dayton 30" Mounted Fans, 15V

• Manufacturer: Dayton

(2x) Dayton 30" Mounted Fans, 15V

(2x) Dayton 30" Mounted Fans, 15V

• Manufacturer: Dayton

(2x) Dayton 30" Mounted Fans, 15V

Ridgid Tri Stand, 1/8 to 5, No 450

• Manufacturer: Ridgid

Ridgid Tri Stand, 1/8 to 5, No 450