Processing » Homogenizers » Australia

Building Filters

26

Used Homogenizers in Australia

Trusted Seller
APV Laboratory Two Stage Homogenizer
- Manufacturer: APV
- Model: 15MR-8TA
Laboratory Homogenizer, “APV Gaulin” model 15MR-8TA, all stainless steel wetted parts, max. pressure 8000psi, driven by 3 phase 3hp 1470rpm motor, trolley is not included Follow us on: © 2024 Fallsdell Machinery ...
Sydney, Australia
Trusted Seller
Fryma Vacuum Processing Vessel
- Manufacturer: Fryma
- Model: VME-12
Vacuum Processing Vessel, “Fryma”, Model VME-12, 21L gross capacity with 4 to 14L working capacity, bowl size 300mm dia x 300mm deep, steam jacketed with scraper, premixing with cavitation disc at max speed 2770r...
Sydney, Australia
Trusted Seller
Stainless Steel Emulsifying Tank
Stainless Steel Emulsifying Tank, 220L capacity, 690mm dia x 600mm deep, open top with two half lids and a bridge, conical bottom with 20mm bottom centre outlet with discharge valve, mobile stainless steel frame,...
Sydney, Australia
Trusted Seller
Silverson Laboratory Emulsifier
- Manufacturer: Silverson
Laboratory Emulsifier, “Silverson” model L2R, with all stainless steel wetted parts, variable speed, requires stand Follow us on: © 2024 Fallsdell Machinery Pty Ltd
Sydney, Australia
Trusted Seller
Inline Emulsifier
Inline Emulsifier, with a 70mm dia inlet x 50mm dia outlet, driven by 4kw 2850rpm, mounted over stainless steel base Follow us on: © 2024 Fallsdell Machinery Pty Ltd
Sydney, Australia
Trusted Seller
Urschel Comitrol Processor
- Manufacturer: Urschel
- Model: 3600
Comitrol Processor, “Urschel” model 3600, 3 phase 7.5kw, with feed pump, mounted on mobile Frame, complete with a spare cutting head Follow us on: © 2024 Fallsdell Machinery Pty Ltd
Sydney, Australia
Trusted Seller
Fryma Processing Vessel
- Manufacturer: Fryma
- Model: VME-500
Processing Vessel, “FRYMA” model VME500, 300L min capacity and 750L max capacity, size: 1000mm dia x 1000mm deep, Steam Jacket with DT: 140 degrees and DP:250kpa, internal Vessel is Vacuum rated, dished bottom wi...
Sydney, Australia
Trusted Seller
Fallsdell Inline Emulsifier
- Manufacturer: Fallsdell
Inline Emulsifier, “Fallsdell” model RC40, 50mm dia inlet x outlet connection, driven by 3 phase 4kw electric motor Follow us on: © 2024 Fallsdell Machinery Pty Ltd
Sydney, Australia
Trusted Seller
Inline Emulsifier
Inline Emulsifier, 38mm dia inlet x outlet, driven by 3 phase 0.75kw 2780rpm motor, all stainless steel wetted parts, 80mm dia impeller & dia 90mm screen, with stainless steel foundation base Follow us on: © 2024...
Sydney, Australia
Trusted Seller
Armfield Universal Process Tank with Silverson Emulsifier
- Manufacturer: Silverson
Universal Process Tank, “Armfield” Model FT40, capacity 20L, with Silverson L4R Emulsifier stainless steel wetted part, mixing, emulsification, pasteurization, incubation, fully self-contained system in mobile ca...
Sydney, Australia
Trusted Seller
Urschel Comitrol Processor
- Manufacturer: Urschel
- Model: 3600
Comitrol Processor, “Urschel” model 3600, 3 phase 7.5kw, with feed pump, mounted on mobile Frame, complete with a spare cutting head Follow us on: © 2024 Fallsdell Machinery Pty Ltd
Sydney, Australia
FRYMA MZ110
- Manufacturer: Fryma
- Model: MZ
Fryma Model MZ110 toothed colloid mill. The FRYMA MZ110 is an inline toothed colloid mill suitable for slurries, that grinds solids and homogenizes the slurry. The required fineness can be adjusted by means of ad...
Melbourne, Australia
FRYMA MZ110
- Manufacturer: Fryma
- Model: MZ
Fryma Model MZ110 toothed colloid mill. The FRYMA MZ110 is an inline toothed colloid mill suitable for slurries, that grinds solids and homogenizes the slurry. The required fineness can be adjusted by means of ad...
Melbourne, Australia
APV Products HP/Industry 16.51H
- Manufacturer: APV Products
YOM: 1993 Was last used for Photographic Emulsion Capacity: 300-400 L/Hr Inlet Pressure: 3-10 Bar (low speed viscosity-high speed viscosity) Max Pump Pressure: 800 bar Cooling Water Volume: Eccentric Oil 90 l/hr ...
Melbourne, Australia
APV Products 58.72
- Manufacturer: APV Products
APV Rannie Homogeniser - "Super Type" Model 58. 72. Drive 55kw 3 phase motor and soft starter. Approx Capacity 2000L/hr at 6000psi or 5000L/hr at 3500psi. 45mm ports. Includes Belt guard, covers and spare seals.
Melbourne, Australia
Fryma MZ Homogenizer
- Manufacturer: Fryma
- Model: MZ
Good condition Fryma MZ Homogenizers manufactured in 2005. Located in USA and other countries. Click request price for more information.
USA

12