Used Mineral Processing

300 - 500 TPD New Flotation Circuit

New manufacture flotation circuit suitable for 300 - 500 TPD of throughput - All new equipment - Made in North America - 17 week typical delivery time - Point of delivery: Douglas, Arizona - Exact rate of product...

12 x 10 Warman 12/10 AH Slurry Pumps

• Manufacturer: Warman

Used 12 x 10 Warman Slurry Pumps -As is; reported to be in good condition -Ready to inspect or ship -Model 10 AH -Suction: 12″ -Discharge: 10″ -Metal lined -Motor Available Seperately -Cast pump housings -Suitab...

300 TPD Dry Grinding Circuit

- 300 HP dry grinding circuit - 12 TPH throughput - 300 TPD Production - Consists of sizer, screen, ball mill, classifier, and baghouse British Rema Ball Mill: - 2.5m x 3.8 m ( 8.2 x 12.5 ft) - Steel liners - E...

3,500 GPM FLSmidth Merrill-Crowe gold and silver plant

• Manufacturer: FLSmidth

- Unused Merrill-Crowe gold and silver recovery plant made by FLS and Summit Valley Technologies to produce up to 3,500 GPM of pregnant gold and silver solution for concentrate production. - Circuit employs zinc ...

Thermal Technologies unused surplus Elution Heaters

- Thermal Technologies unused surplus Elution Heaters - Two independent skids - Each Skid has 8 bundles - Each bundle rated 480v 3ph @ 313kw - (Total 2,504 kW per skid) - (5,008kw total) - 12″ NPS 316L SS shells ...

Unused surplus Peerless vertical turbine pumps with 200 HP

- Unused surplus Peerless vertical turbine pumps with 200 HP WEG motors - Pumps made in USA - 3 units available - Design rating of 1065 cubic meters per hour - Model 20HH - Closed impeller - 460 V motor, TEFC

22 x 20 Ash Type SRH Hydroseal Pumps

22" x 20" Ash SRH Hydroseal Pumps - Tailing Pond Pumps, 1996 - For 1,000 HP, Rubber impellor, Rubber lined - Variable speed - Four pumps, two spare barrels and some spare impellers - No motors or bases

5 x 3 ft (1.5 x 1 m) SAG mill with 20 HP

- Skid mounted - Chain-driven with rollers under shell - Falk gearbox Motor: - 20 HP (15 kW) - 1750 RPM - 256T frame - 230/460 V - 3 Ph - 60 Hz

13.5 x 4 ft (4 x 1.2 m) Marcy SAG mill with 300 HP

- 13.5 x 4 ft shell - Originally designed for dry grinding - removed, disassembled, and in storage ready for inspection and shipping - Mill trunnions and wear parts protected during storage - Trunnion bearings cl...

24 x 8 ft (7.3 x 2.5 m) Hardinge SAG Mill with 3,000 HP

• Manufacturer: Hardinge

- 2 Flender gearboxes - Liners quoted separately - 3,000 HP GE synchronous motor - Mill is disassembled and in storage

24 x 9 ft (7.3 x 2.7 m) Boliden Allis SAG Mill with 3,000 HP

24 x 9 ft (7.3 x 2.7 m) Boliden Allis reconditioned SAG Mill with 3,000 HP (2240 kW) GE motor - Mill shell in 1 section - Inching drive, 3 piece - Feed and discharge ends - Shell and discharge liners - Discharge ...

Equivalent in Performance with Type AH Horizontal Slurry Pumps

- Centrifugal seal - Cast casings and pedestal base - Equivalent to series AH pump - Liners are pressure molded vulcanized rubber - Impellers are rubber, polyurethane and steel are available - Fabricated over-sea...

Type B-6-6 Ash Pump with 100 HP (74 kW) motor

Type B-6-6 Ash Pumps with 100 HP (74 kW) motor - Three units available.

8 x 10 ft. Eimco Drum Filter

• Manufacturer: Eimco

-Rebuilt and in good condition -Stainless Steel Drum -Configured for Belt Discharge -16" Stainless Steel Valve with POLY-PRO Wear Plate -16" Cast Iron Trunnion Bearing -Drilled for Valve and Gauge Mounts ...

Bank of 6 Agitair Flotation Cells

- Used Bank of 6 Agitair Flotation Cells - Rubber wear parts - Arranged as 3 sets of 2 cells with a feed and discharge box - Cels include used 15 and 20 HP motors - ~50 cu ft volume per cell