Used bolt

Shell and Tube Heat Exchanger 1.3 m² (14 ft²) Stainless Steel - IPP# 211622

• Manufacturer: Chematec AG

contact condenser. shell 362 mm diameter x 1145mm flange to flange x 1610mm over all length Bolted dished top, bolted cone bottom

2022 PFI 452-12-S-MS-CAS

• Manufacturer: PFI

Equipped with: Extra Buckets Baldor VWDM3538 Motor Stainless Steel Bolt On Covers Standard Painted Bearings Zinc Plated Inserts

Shell and Tube Heat Exchanger 1.3 m² (14 ft²) Stainless Steel - IPP# 211624

• Manufacturer: Chematec AG

contact condenser. SS shell 362 mm diameter x 1145mm flange to flange x 1610mm over all length. Bolted dished top, bolted cone bottom.

28" Diameter Mild Steel Cyclone Separator

Constructed of 16Ga. carbon steel sheet Dust-laiden Inlet: 9" X 12" flange with bolted 8"Ø transition sleeve Dust-laiden Outlet: 7"Ø flange Filtered Air Outlet: 12.75" O.D. sleeve Side-mounted removable clean-out...

175 Liter Precision Reactor, 316L S/S, 45/100#

• Manufacturer: Precision

175 Liter Precision Reactor, 316L S/S, 45/100# Used 175 liter Precision reactor, 316L stainless steel construction, bolt on dish top, dish bottom, rated 45 psi and full vacuum at 300 f internal, jacketed for 100 ...

150 Gal For Corp Receiver, 316L S/S, 150#

• Manufacturer: Four Corp

150 Gal For Corp Receiver, 316L S/S, 150# Used 150 gallon Four Corporation receiver tank, 316L stainless steel construction, approximately 36" diameter x 32" straight side, 2:1 elliptical dish bolt on top, 2:1 el...

500 Liter Precision Reactor, 316L S/S, 45/100#

• Manufacturer: Precision

500 Liter Precision Reactor, 316L S/S, 45/100# Used 500 liter Precision reactor, 316L stainless steel construction, bolt on dish top, dish bottom, rated 45 psi and full vacuum at 300 f internal, jacketed for 100 ...

40 Gal Trumbo Receiver, S/S, 100#

• Manufacturer: Trumbo, Incorporated

40 Gal Trumbo Receiver, S/S, 100# Used 40 gallon Trumbo receiver, stainless steel construction, approximately 18" diameter x 32" straight side, removable bolt on dish top, dish bottom, rated 100 psi and full vacu...

CONTINENTAL

• Manufacturer: Continental

Qty (1) Each: 340 Gallon Carbon Steel pressure vessel. Rated 110PSI/Full Vacuum internal @ 500 Deg.F. . Also has an internal coil rated 275 PSI @ 500 deg. Bolt on dish top.

Derrick Screener Vibratory Drive - Model: K / 5

• Manufacturer: Derrick Corp.

ITEM #: 07424 Used Derrick Screener Vibratory Drive - Model: K / 5 Serial number: 8525, 3600rpm, 460 volt, 3 phase, 60 hz.Bolt Pattern: 37-1/2" L x 8-1/2" W All prices are FOB Millwood WV unless otherwise noted. ...

24" Wide X 14' Long Eriez Electro-Magnetic Vibrating Feeder Conveyor

• Manufacturer: Eriez

Two Electro-Magnetic Drives. Model 98B, 460 VOLT, 60 Hz, 17.5 Amps per drive. (No controller included). S/N-93068-3, Bolted 1/2" thick abrasion resistant liner. Designed for cable suspension. Overall Dime...

1,500 Gal Fourinox Reactor, 316 S/S, 100/100#

• Manufacturer: FourInox, Inc.

1,500 Gal Fourinox Reactor, 316 S/S, 100/100# Used 1500 gallon Fourinox reactor, 316 stainless steel construction, approximately 48" diameter x 232" straight side, flat bolt on top, 2:1 semi elliptical bottom, ra...

18" x 24" Patterson Ind Basket Filter, 304L S/S, 750#

• Manufacturer: Patterson-Kelley

18" x 24" Patterson Ind Basket Filter, 304L S/S, 750# Used Patterson Industries basket filter, 304L stainl stainless steel construction, 18" diameter x 24" deep, rated 750 PSI @ 428 F internal, jacketed for 100 P...

AIR-FLOW DUSTPAK USED DUST COLLECTOR APPROX. 1200 CFM WITH E-Z ARM EXTRACTION SYSTEM

• Manufacturer: Flow

This used Air-Flow Dustpak dust collector is designed for efficient air filtration in industrial environments, with an approximate capacity of 1200 CFM. The unit is equipped with the E-Z Arm Extraction System, pr...

80 Gal Northland Stainless Reactor Body, 316 S/S, 100/150#

• Manufacturer: Northland

80 Gal Northland Stainless Reactor Body, 316 S/S, 100/150# Used 80 gallon Northland Stainless receiver tank, 316 stainless steel construction, approximately 22" diameter x 3.25" straight side, bolt on top, cone ...